Is there a way to move multiple frames in the motion editor (CS4)? Like now I have to move them one by one and it's hard to make them keep their values coz the shift+move doesn't seem to work.
View 3 Replies
When creating an animation with a classic tween sometimes I'd have to adjust all frames based on changing stage size and what have you. I'd usually park animations in mc's but even then I'd have to on occasion move the whole animation as whole, using the Edit Multiple Frames button on the Timeline. This is also needed when repurposing Flash ads for different sizes. Sometimes I have to adjust a few layers and leave some layers alone, again for Flash ads and alike.
When using a Motion or 3D tween I wanted to know if this was possible, not because I have a particular scenario but I wanted to see if I could do this in the event of needing to do so one day. I tried this feature and I was unable to move the whole animation as I would with a Classic Tween. The only thing I could do to achieve this was to park the Motion/3D tween into it's own mc and then drop that mc on the stage and move the mc as a whole. Is there any way to select all frames of the Motion Tween and move it as a whole without resorting to putting it in a mc (even though I get that it should always exist in a mc)?
I really like the motion editor in CS4. A lot is easier than before, particularly working with ease. But I wounder how you use the custom curve when having a complicated motion with a lot of keyframes. In programs like AE it's easy to select a key and tell if it's going to be a easy in/out or both, and then I select next key and tell how that key should ease. In Flash CS4 I allways get a easy curve that range the entire tween. Is the workflow to brake everything apart so you tween every single motion, or is it another way doing it?
View 1 RepliesWhy are the scale x and y options grayed out on the motion editor? I tried editing width and height (W&H) in the "properties panel" under "position and size" and all that does is move the position my object diagonally for some reason, not scale the size. Also, when i do this, the Width number does not change, but the x and y position numbers above it change. Strange!
View 3 RepliesI'm working in Flash CS4 and I can't see my timeline (or playhead) in the Motion Editor.I've never experienced this before and have no idea how to remedy the issue
View 3 RepliesI was playing around with Flash cs4 on the motion editor, and I changed some number at "exanded graph size" from 200 to 150, and the entire motion editor became empty!
View 1 RepliesEverytime I try to make a change by scrubbing a number in the motion editor, the program crashes with no explanation as to what went wrong. How do I stop this from happening? I was viewing an online video tutorial when it happened. If it helps, here is some information about my computer:
[Code]...
I've tried searching but have not succeded in finding an answer, I just hope i'm not asking something that has already been answered.ANyway , here I go.For some reason the filter option is greyed out in the motion editor ans i don't understand why, and I was hoping someone would be kind enough to enlighten me on the matter?Could it have to to with the fact that i'm apply ing the motion tween to a graphic symbol with an imbedded animation ? Should i change it to a movie clip?
View 1 RepliesI just want to add/delete a single frame (not a second worth of frames) inside a motion tween.
View 2 RepliesWhen I try to insert a keyframe in Motion Editor, Flash CS5 crashes.I tried to use two computers running the same Mac OS X 10.5.8 with the same specs and only one of the machines crashes.
View 1 RepliesBy default when I create a new motion tween, it automatically comprises all frames on the layer I want only a 72-frame tween, not a 350-frame tween.
View 2 RepliesI havve accidently created extra unneeded key frames in a layer, in the middle of motion tween. I was wondering how to change these keyframes, without deleting them so not to change the length?
View 3 RepliesI recently migrated from CS3 to CS4, and have a question about the "Motion Editor". In principle it sounds fantastic, but I can never get it to work on any of my fla files. The tab is there, but when I select a tween span in any of my files, the Motion Editor continues to say "to edit properties, select a tween span in the timeline or a tweened object in the document." Nothing I do can get the Motion Editor to show anything but this.
Is this because the Motion Editor works only on tweens in new fla files created in CS4? (My existing files were all created in CS3.) Very frustrating, as I would like to use this new feature. I tried to get it to work in a new CS4 file, creating a tween and going to the Motion Editor tab, but.
Motion tween of a png image doesn't move fluently but with little jumps. I have change fps but it doesn't help. What parameters should I check?
View 2 RepliesI have 260 images that I need to place on different frame. Instead of dragging them one by one the image on the stage, is there a way to drop all of them in one shot but each images is on a different frame?
View 3 RepliesI'm struggling through trying to learn the new tween system. Is it just me or did they completely NUKE workflow with this new system? Is there any way to copy and paste the property keyframes?I often have animations where things loop, so the last frame of the motion tween needs to be the same as the first frame. In the old days I would just select and copy multiple keyframes from frame 1 and paste them at the end. Done in 5 seconds. The only way I can find to do this now is to hand set every freaking property on every freaking keyframe of every freaking object.
View 1 Replies"How do I get the motion editor to show easing controls"?
I've just made my first flash movie in flash cs4 and I wanted to add easing to the (classic) tweens I created. I tried selecting the first graphic, then I tried selecting the (classic) tween span, but each time I go into the motion editor it just says "To edit properties, select a tween span in the timeline or a tweened object in the document".
iam new to Flash CS4 and for some reason i cant scrub the playhead when in the motion editor window? if i press on the playhead it only moves to next dot on motion timeline, like a snap motion.
View 1 RepliesThe playhead in Motion Editor doesn't work and I'm seeing in tutorials.I can't scrub it along the timeline.When I pick a keyframe point it doesn't appear there unless I change the value of that point. If I then click on the playhead rectangle, the playhead disappears (actually it appears to jump to the first frame where it's half visible and can't be moved).I was playing with the motion editor interface trying to better define the problem and I figured out what's wrong.
The Motion Editor values for graph size, expanded graph size, and viewable frames were unusable in their default settings. In particular, viewable frames were set to 1 by default. As I increased the value the playhead started to function. I can't set a value higher than 117. I've maxed-out the graph size setting at 180 (300" wide format display) and the expanded graph size at 200.
I've been using the motion editor for my Motion Tweens, but as you probably know, I can't use the motion editor on a Shape Tween. Is there no way to do this? I just want it to slowly ease in.
View 6 RepliesI'm trying to access the rotationY property in code to determine the current state of a movie clip that has its rotationY animated in the motion editor. What I'm seeing is that the value of the property reported in a trace stmt is different than the value shown in the motion editor.
In the motion editor I created a tween from rotationY=0 at frame 0 to rotationY=353 at the last frame. I've added the attached code to get the value of rotationY at every frame.
What I see is that the rotation does not increase steadily from 0 to 353. Instead it increases from 0 to 90 and then decreases back to 0 and then goes negative to -90 at which point the absolute values decrease toward 0. This seems like a bug. The rotation of the object is visibly different during the 0 to 90 deg
I recently installed Flash CS4. As I attempt to learn from different tutorials I've run into a problem I can't figure out. I've watched the video tutorial at: [URL] several times to try to emulate the rotating logo. The problem I run into is when he says to open the Motion Editor and to edit the Rotation Y and Rotation Z properties. When I open my Motion Editor there is no Rotation Y or Rotation X. There is only a Rotation Z property. I've played it over and over to try to discover what setting I've missed but don't see it. How do I see a Rotation Y property to be able to edit it?
View 2 RepliesIs it just me or is creating and applying custom easing with the motion editor absurdly difficult? Firstly, the bezier curve tool for custom easing has a mind of its own. It will change the curve at a different anchor point to the one you're editing on a whim and every time you get close to where you want the curve it does it again and you're back to square one. Second, you have to recreate a custom ease for every tween as there's no way to save them. It's impossible to create two custom eases exactly the same! The entire motion editor seems designed to infuriate me and parts of it don't seem to have been tested at all.
View 15 RepliesI'm just now trying the Motion Editor for the first time in CS4 Professional. I've created a shape, converted it to a symbol, done an Insert Motion Tween, and brought up the Motion Editor. I'm looking for Rotation X and Rotation Y, but only see Rotation Z. My Publish Settings are Flash Player 10, ActionScript 3.
View 2 RepliesI want my object to animate using Motion Tween in Timeline. I did so. But it starts animating from Frame 1. Instead I would like it to start animating from Frame 25. I don't want anything to animate upto 24 Frames. How can I do that?
View 1 RepliesI'm creating an interactive flash application that uses hundreds of individual renders from a 3d modelling app. The image file size is 800 x 600. Each sequence that i import to the stage is around 120 images and each gets put into a separate key frame. The problem is, often when I import batches of files into flash the program crashes and stops responding.The problem gets worse after each succesful import ie. after importing the first lot of files, its unlikely that the second lot of files will importInterestingly, I dont have this problem on my pc.
View 2 RepliesIn CS5, I want to create a series of buttons that when clicked will linked to other frames in the same timeline. So one button will link to frame 5, one will link to frame 10, one will link to 15, etc. All the buttons will appear across the top of the stage on a layer, and I want them to appear on all of the frames so the user can click back-and-forth to the different frames/screens.
1. Is the best way to do this to just add the buttons to frame 1 and add a keyframe to the last frame in the timeline, frame 15, so they are copied to all the frames in between?
I created an animation in Flash that is 14 frames, I need it to be 1 frame long, but still have to have the animation. Is there any way to make it 1 frame and keep the animation?
View 2 Repliesbasically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 RepliesI'm doing some masking with the brush tool. Each keyframe I'm drawing a bit more of the mask. My problem is if I go back to the first keyframe and paint something it doesn't appear on the other keyframes.I thought I found the solution with Edit Multiple Frames, but it doesn't seem to work with the brush tool.
View 1 Replies
