Is it possible to set a buffer of 10 minutes to either Flash Media Live Encoder or Flash Media Streaming Server? We're considering setting up a live stream for a gaming tournament, but we are concerned about players being able to cheat by watching the live stream while they play.
View 2 RepliesHow to apply this kind of logic inside FMS?
View 6 RepliesHI installed flash media server 3.0.4 on a Windows 2003 server.I am using the default LIVE application and broadcasting to it using FME version 3.0 Inside FME I choose MP3 as the audio codec, stereo and 128kbps When I watch the stream everything works fine but after a minute (sometimes 2 minutes) the sound disappears and I can only see the video run.If I refresh the page that contains the SWF that plays the stream then the sound works again but then again after a minute the sound stops and only the video continues to play. It is important to say that this only happens when I play a live stream from a server that is located outside of my local LAN. If I play a stream from my development FMS server in my local LAN this problem doesn't happen using the same SWF and same settings in FME.Moreover, if I use the nellymoser audio codec then everything works fine and this problem doesn't happen also. The thing is that I want to broadcast a live event and it is very important that the audio sounds good (stereo and 192kbps) and if I use the nellymoser codec the results aren't that good.
View 5 RepliesI use FMS 3.5 and i have same problem.....the delay of live video from the studio to clients is big, 10 seconds if i restart the server. After one day of staying on, the delay reaches 1 minute or 2.
The FMS is connected to 1 Gibabyte internet fiber, and the stream is VP6, 500kbps video and 128kbps audio, 720x576 resolution. Server Quad 3.0Ghz, 4 Gb Ram.
Please help me to minimize the delay. What i must write in application.xml from live folder?????? Is there a command. I don't want to make buffer, i want the clients to receive live stream, if the stream is buffering i want to play it jumping that sequence, to maintain the live aspect,not to delay it if the clients doesn't have a good internet conection.
Let's suppose i have 1 FMS, 1 Media Encoder, and 2 computers with flash player on the same Switch ( Local area Network). I've made some tests and the delay i get is minimum 5 seconds.
at the tail end of my Flash cs4, actionscript 3.0 college project and want to incorporate a countdown Timer Event when there is a 3 minute delay of usage in the flash movie (interactive).Below is what I understand and want to accomplish.Is it correct to place the actionscript code in the actions layer of the 1st frame within the 1st scene?And will it be recognized throughout all the scenes within the flash movie?1. Have the flash movie recognize a delay of usage (no clicking) after 3 minutes to start a countdown Timer Event.??Where would I add code to the timer to fire every 3 minutes during a delay of usage?
import flash.utils.Timer;
import flash.events.TimerEvent;
var count:Number = 11;
[code].....
I'm noticing a 13-16 second delay with live streams to iOS devices. Is there any way to improve this delay time by modifying the Event.xml parameters or the Apache hlshttp_module parameters in httpd.conf?
View 9 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesI build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
I'm doing some tests with FMS and live streaming, but I observe quite long delays. When the stream is first accessed, the latency is around 3-5 seconds, which is acceptable. But as we watch the stream for about 30 minutes or more, the latency grows to around 20 seconds, which is just too much. What settings should I look at to keep the latency / delay minimal?
View 3 RepliesHow i can record a live stream.
I need a very simple app that will connect to rtmp and record it. The app will be on the same server as the live stream.
Is it possible to live stream both RTMP and HLS with FMS 4.5?
I want flash users to have the least latency possible using RTMP, and iOS users use HLS.
How can i stream video live by the help of PHP like live tv? I am willing not to use flash media server. If it is must to use it then which server is free and reliable?
View 1 RepliesHow can i delete the Live stream that published by the client(the stream it's not working)
View 2 RepliesPossible to place or insert text on live video stream using the FMS?Whether with any solution or plugin.I am a web radio broadcaster and would like to have information on the screen like the station's phone number instead of having to keep reading it out all the time.
View 2 RepliesI'm having some trouble finding out how you can add metadata to a live stream. I'm streaming the webcam over fms and recording it in main.asc. So far so good. I have 2 applications. One that sends data and one that recieves data. The functionality is more or less like this example. The article says: "Note: If you record the video on the server side (a functionality of FMIS), the injected events are lso being triggered by the recorded file." That is what I want, but I have no idea how to make it happen. The problem is that I can't find any good examles for as3 and I have never looked into as2 (still new to flash in general )
View 1 RepliesI'm recording a lot of live streams for archiving purposes. Is it possible to somehow (programmaticly) get the timestamp of a certain point of such record?
View 3 RepliesWhen I use Adobe Flash Media Server 4.5 publish http live stream. I found a message from Server Log of Manage Servers of Adobe Flash Media Administrator Console. It says that "Failed to record live stream (disk quota exceeded)."
View 3 RepliesHow to create a script of some kind to grab a still picture from a live stream and save it as a JPG file?
In this way a cron job can tricker the script and thereby grab a picture fx every 10'th minute and the picture can be shown on a website so people that are not attending can have a look into what is happening in the live stream.
I was wondering how can I connect to a live stream camera like this one URL... or others if you know. And after I established the connection to load it in a movieClip and have it in full screen.
View 0 RepliesI'm just starting with ActionScript and I want to make an app, but I'm wondering that what I'm thinking of is even possible.Is it possible to make an app that receives a live stream from my desktop??
View 2 RepliesHow do you stream a live camera feed in a flash/actionscript file?What video format do you need to stream it in a swf?
View 1 RepliesCode:
var nc:NetConnection = new NetConnection();
nc.connect("rtmp://flashmedia.NunyaBusiness.com/live/");
var ns:NetStream = new NetStream(nc);
[code]....
I am using the above code for a live stream. My quesiton is how do I detect whether there is content being streamed and if not, to show a "Coming Soon" movieclip? I know that a listener would do the trick, but I have no experience with listeners in AS2.
I have some sounds on buttons:
Code:
var mySound:Sound = new myLibrarySound();
myButton.addEventListener(MouseEvent.CLICK, playSound);
function playSound(e:Event):void
[code]....
... and that works fine. I then have some streaming music:
Code:
var myStream:Sound = new Sound();
myStream.load(new URLRequest("myPath.mp3"));
myStream.play(0);
... and that works fine too. Now, however, the initial button sounds have a slight delay -- I'd estimate about 150-250 ms. It's enough that rollover click noises happen about the time you click, and click noises happen about the time you release, etc. Now, here's the KICKER. It only happens in FIREFOX. CURSE FIREFOX. Seriously. I've been having so many Flash issues in FF3, it just drives me nuts. Firefox and wmode is a pain, Firefox and sound is a pain, Firefox has been crap for Flash development lately.
Im writing an application that parses xml to display a menu system in Flash. The same loop that grabs the xml creates a new movie clip for each node(menuitem). I need to set a delay between the duplicated movie clips so they appear one after another rather than all at the same time. Ive tried a few different things (interval and timer) but havent got it to work.
Code:
var item_spacing = 60;
var item_count = 0;
var item_count_next = 0;
var newy = 0;
_global.itemNumber = "";
function CreateMenu(menu_xml){
[Code] .....
I have a HD Camera streaming a live feed through FME 2.5 to FMS 3.0 using the VP6 codec and it works fine. I have now been trying to get the same stream running via H.264 and althogh FME 2.5 connects to the FMS 3.0 server and the stream starts with FMS 3.0 reporting the stream no problem. The Client application crerated with Captivate 3 using Flash Player 9 for publishing no longer dispays the video. Switching back to VP6 works again.
View 4 RepliesI have a live encode to the media server with dvr enabled for H264/MP3 format. When I try to play the dvr cache stream, all I get is audio and no video. If I switch to VP6/MP3, the stream plays fine. If I do a live encode with no dvr, it streams fine. Does dvr with H264 work only when you flatten the file using F4V post processor tool? Will the dvr cache stream work if I switch to AAC instead of MP3?
View 3 RepliesI'm running the Interactive Flash server 3 and I'm wondering is there a way to give people a user & password to limit who can live stream into the server.I can do this with the Real server and Windows media fairly easily but having problems figuring out how to on the flash server.Currently if you have the Servers IP and the flash encoder you can stream with no Username or password required. I would like to restrict this.
View 3 Repliesi have an urgent question for the following purpose. We plan to develope a solution consisting of a sender software for streaming live video to the streaming server. Now more than one client should be able to connect to the stream of the server. Because the different clients are connected with different bandwidth rates the server should be able to convert the video stream (e.g. the video width and height, framerate and quality) on the fly. Maybe a client with a better connection than DSL should get the video in a resolution
of 640x480, a DSL client should get the video in 352x288 and a client with ISDN in 176x144.
Is there a possibility to do this with the FMS server on the server with server-side ActionScript? Or can I limit the requested stream size on the client side? Or anything I can do?