Is it possible to duplicate a timeline layer in Flash CS4, including all keyframes? I use it a lot in Illustrator and Photoshop, but can't find it here. Is there a trick to do this?
View 3 RepliesOk, I know layers dont exist once compiled and that duplicated movieclips cannot be duplicated to new levels but I need some kind of work around here.
I cannot use the library as the movieclip I am duplicating is dynamically generated by actionscript (a graph based on user input over time) and thus cannot be made by me beforehand as it varies.
I need to somehow make a duplicate of this on a layer above the where the original was made, anyone know how this is possible?
Is it possible to change the color of one layer in the timeline?I would like to do this to create a kind-of separator...
View 0 RepliesI have just taken over a Flash website for a friend (like two days ago!) He needs me to add a picture to a movie in his website. He likes how the previous designer has the images fading in and out not a slide show, i 10 layers with actions on each) so I figured I could duplicate/copy an existing layer & paste it into a new one... but here is my problem, when I change out the image on the new layer it also changes the image from the copied layer. What am I doing wrong?
View 1 RepliesNew to actionscripting, have focused on the graphic end of things until now so apologies for the noobish question...I have a star that runs along a guide layer to draw a shape, I would love to duplicate the movie of the star so that it trails along the guide layer to leave a trail of stars along that path.
View 1 RepliesIs there any method with which I can get to know which of the two movieclips I'm using is lying above or below in the timeline 'layer' arrangement in flash.
what I'm asking is if have two movieclips 'a' and 'b'. One in layer 10 of timeline of flash professional and 'b' on layer 1. Will be able to change the index order using pure as3 code to visually keep the movieclip on the 10th layer on top of the movieclip on 1st layer?
I'm confused as to how Flash CS5 treats symbol instances across different frames in a given layer; If I add an object to a layer, and then add a keyframe to the existing frame set, are there now two instances of the object, one for each frame? When I change the color of the instance in the first key frame, the second keyframes instance stays the same. Is there anyway to edit across all frames? Paste across all frames?
View 2 Replies[Code]...
So, can I access layers on this MainTimeline to get all Movie Clips on this layer ? So I can do a simple operation "A_1_2.buttonMode = true;" to all my MC's (in an array for example) without writing every line (lot of MC's on layer and lot of lines).
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesI'm used to add actionscript to objects (eg buttons) but I want to learn how to add it to a timeline in a layer (i've learned that it is best practise). Eg. I want to play a movieclip when a button is activated and i write this[code]...
View 4 RepliesI am a beginner when it comes to ActionScript. I am currently working on a Slide Show Pro project. Specifically SSP for Flash (AS3) and Director. I have 4 custom buttons at the bottom of the slide show. When I try to place ActionScript on my Action layer for let's say two of the buttons I get an error that says "Duplicate Function Definition." Here is the code I am using:
[Code]....
How to create timeline sub layer in main layer without group and mask?
View 2 RepliesIs there a way to change the background color of the layers the Flash timeline itself? I'm using XP, and there is not enough difference in the color of a selected layer and one with extended keyframes that is not selected. At school I use a Mac and there is definitely a blue vs. a gray. On my computer, they are two very close shades of gray.
View 1 RepliesI want to load jpgs using an external XML file into a flash layer and have a timeline playing over the top of them. I invision having photos loaded to a box on the left side of the stage covering 1/3 of the area, and then loading photos also to a box on the right side of the stage while an animation plays of the clients logo in the middle 1/3 of the stage area. My Action script skills are very limited. I have been able in the pass to modify what I have found on the web to work for my purposes. But, I have not been able to find anything that has multiple players on one stage or anything close. I created a swf that alternates loading an image on left and then right but it plays over the top of ... and then loads a third image behind the client logo in the middle covering the entire stage. But I would be happy with just a left and right alternating if possible.
View 2 RepliesI made a button a stage, and I want the button to take the user to a separate scene that I have named "Biography page" when it is clicked. The thing is, I want all my actions on one specific layer. So I made an instance name for my button, "aboutme". The thing is... I have no idea how to write the code.
[Code]....
Say on frame 100 of my timeline on my layer movie, I want to load a clip. What is the AS that I put in the keyframe 100?
View 2 RepliesI am developing a flash web site using ACTIONSCRIPT 3. There is a menu of small icons that, when one of them is clicked, the program loads the correspondent SWF into a loader and then presents it in a "virtual screen" ( a rectangular area ) in the web page. The problem is that some of these child SWFs have an embedded background sound and I DO NOT KNOW how to mute them from the main SWF when a user decides to do so by clicking a "mute" button.
Each SWF embedded sound has its own layer in its timeline and is set as Sync: Event, Repeat:1.
I don't know if this is the right term "overriding timeline functions"... I'am making presentation wich has 8 navigation buttons..the presentation goes like this...when you press one button it goes to this buttons segment and play's it, when is finished it comes back to navigation by action gotoAndPlay ("menu")...myproblem is the last button...wich says Whole presentation...i cannot duplicate the presentation because it has too much keyframes and max is 16000 (i am not master atFlash )...so i would like somehow to cancel all the gotoAndPlay actions if it is possible?? so when i click the last button (whole presentation)...the playback doesen't jump back to menu...but plays til the end.
View 3 RepliesMy problem is that when I click the letter movieclip it does create the duplicate as it should and it starts to drag the duplicate mc. However, when I release the clip it doesn't stop dragging? I realized that if I put onMouseUP event instead of onRelease it actually does stop dragging when I release the mouse. I would, however not like to use the onMouseUP event if possible.
[Code]...
If I have an object that calls
addEventListener(Event.ENTER_FRAME, update);
addEventListener(Event.ENTER_FRAME, update);
will that add 2 listeners?
I am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 RepliesIm creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 RepliesI can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesI want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesI have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
I am having problems dupliating a movie clip. I can make a duplicate from an original but when I edit the duplicate it also modifies what is in the original. (I am just changing the text, thats the only difference between the 2) How come it effects both clips when I only change one?
View 6 RepliesI'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
Why this code doesn`t work?
tip_052.addEventListener(MouseEvent.MOUSE_OVER,ove rSub);function overSub(evtObj:MouseEvent) {
tip_052.visible = true;
else[code]....
appear this error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax error: else is unexpected.
this is the END of the code:
this.createEmptyMovieClip("pos", total);
pos.moveTo(radius.b, 0);
pos.beginGradientFill("radial", [0xCCCCCC, 0x999999], [100, 100], [0, 255], {matrixType:"box", x:-radius.b-radius.b/2, y:-radius.b-radius.b/2, w:radius.b*2, h:radius.b*2, r:0});
for (var radians = 0; radians
I get a error for the last line. The error is this:
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 11: ';' expected
for (var radians = 0; radians
I cant get it working.. I have flash mx 2004 pro..