I need to create a simple video streaming without using Flash comunicator server or other streaming server.So I am thinking to use RTMFP but I haven' t found any good RTMFP tutorial for this issue.
Do you know tutorial for Video Streaming using RTMFP ?
I would like to serve high quality video (H.264) between a server and a single Flash Player client with low latency (RTMFP). The single client will be controlling a robotic device and seeing the results through the video stream, so low latency is important.
Option A: The Flash Player supports low latency streaming of video between two P2P nodes via the RTMFP protocol in Flash Player 10. It uses the Spark codec to encode the video and as far as I know it is not possible to encode using any other codec in the player.
Option B: Flash Media Live Encoder does support live encoding using other codecs (On2 and H.264) but cannot act as an RTMFP peer - this option would require Flash Media Server in the middle.It seems I cannot stream video to a single client over RTMFP with anything other than Spark.
I have an app that streams in video live, and archives it as it goes along.My question is this: What happens when I hit, or allow, 'pause' on a live stream, and then 'play'? Obviously the person on the other end streaming continues to do so, and my application continues to archive it, but what about the person receiving the stream?
Do they resume play from the archived copy, or do they seek ahead to the current point in the stream, missing everything they were paused for?
There are 25 livestreams streaming to FMS4 server by fmle3.2,and client number is 20, (FMSCore.exe)CPU usage is about 20%~40%, how can i reduce cpu usage?
CPU: 2x E7320 2.13G
Is there an open source implementation of rtmfp?Is there FMS hosting that support rtmfp?
View 2 RepliesI am streaming flash video and the dimension of the video is 1280 by 720 (same size as the stage)
but just before the video streams, there is a quick flash of the video (about 320px by 240px) at the top corner of the stage, and then it plays the videos at the correct size (which is 1280 by 720) .... a quick flash is the best way I can explain it.
This is my code:
function clicked(event:MouseEvent):void {
var video:Video = new Video();
addChild(video);
[Code]....
is there anyway I can stop that quick flash of the video .... so when I click on the button, it just plays the video, at the correct size?
I want to play smooth streaming video from IIS using the flash video player like e.g. jw flash player instead of silverlight player?Which video format should I use in this case? Can flash then play e.g a video via smooth streming encoded with microsoft encoder?Do you know some alternative video players, that combines flash and silverlight functionality (selected per java script) to use with flash and silverlight?
View 1 RepliesI am trying to make a flash movie and have it find a external movie to show. I also need to be able to change the location of the video without flash, so I think I have to use a seperate .as file.
View 6 RepliesI am looking for a sample media player using OSMF for RTMFP P2P streaming media.
View 2 RepliesI'm search for a editing flash templates video tutorial xml and non-XML.
View 1 RepliesI need a flash video player for our public site where users will share videos.The video usage model is similar to youtube as far as video part is concerned.Users will upload and share videos. Users will browse and play all shared videos as well.The videos will be streamed from the server and our app is a .NET/C#/JQuery application.We have 3 options:
1) Either buy a commercial flash player
2) Customize a open source player or use free player and customize its gui
3) Develop our own (time consuming and last resort)
I am required to find a flash video player with these requirements:
Player should work in all major browsers (IE, FF, Chrome, Safari)
Player should have way to inject Advertisement clips when playing a video file
Light weight and easy to integrate
Must support streaming and scale
Plus all other basic features of a flash video player.
Possible Duplicate: Flash video player for video streaming.is there any good and open-source video player to be embed in as3, no flex, html, and js.i tried
f4player.org
https:[url]....but i found tons of bugs,if you know any comercial player, that would be awesome too.
I wanted to make a website that would let users record a small video message through their broswer and save it to my website.As I have never used flash, i wanted to know what softwares would be required and what programming languages would I need? I mean, what should I go about learning to implement such a site. I would prefer open-source solutions wherever possible.
View 1 RepliesSo I've been following URL... lovely "Flash Video Basics" tutorial and have encountered some issues which have eventually brought me to a brick wall.After seeing this error regularly:"1061: Call to a possibly undefined method attachVideo through a reference with static type flash. media: Video."I followed someone's advice to use attachNetStream() instead of attachVideo, which worked for a bit..Then I encountered an problem in which the audio would play, but no video. This led me to another forum which suggested that all the script I was trying to use (taken from the tutorial) was actually Actionscript 2.Changing my export to use Actionscript 2 instead of 3 fixed some problems but created others. I'm feeling like at this point I have to give up on the tutorial and just get friendly with a manual - but I'd love to be wrong about that. So I guess my question is: Does anyone know if these (very nicely done) tutorials were created with a version of Actionscript in mind?
View 4 RepliesI would like to get the NetStream width/height when receiving a RTMFP stream. This is important because the video component needs different measures when, for example, the user receives a 4:3 or a 16:9 stream.
Unfortunately, the onMetaData callback for NetStream does not work as it does for RTMP streams.
I've been experimenting with Dynamic Streaming while in the process of writing a tutorial. The documentation is quite clear on a few points: The keyframe interval in the various encodings should be shortThe bufferlength should be at least 2x the keyframe intervalThe player should sense a bandwidth change, by default, within the 4-second sampling interval and call for a switch. Then, the switch could take as long as 2x the keyframe interval after that. What I'm finding is wildly different behavior than this. It takes anywhere from 10-15 seconds for the player to notice the change and call for a switch, then another 20-40 seconds for the switch to happen. When switching up to a higher bitrate stream, this just means the user gets low bitrate video for longer than they ought to. But when switching down due to falling bandwidth, the buffer runs out and the user stares at the rebuffering sign for a lengthy time - long enough to give up on watching the video, for sure.
I've encoded an H.264 MP4 file at 64, 384, and 768 kbps, at 30fps and an "every 60 frames" keyframe interval. I've streamed it rtmp via two different CDNs that use FMS 3.5, into two different Flash video players (JW Player and Flowplayer). I've restricted my bandwidth on Windows XP with Netlimiter 2.0; and on the Mac with 'ipfw'. I've set bufferlength between 4 and 10 seconds. I've tested switching up and switching down. For up, I start with a 200kbps bandwidth limit. The video starts OK with the correct stream, then at 5 seconds I open up the bandwidth to unrestricted. For testing down, I do the opposite: start at unrestricted and then at 00:05 restrict to 200kbps.
My test page, with both players and sample code is at [URL] n-flash-bitrate-switching/ I also have a couple of screen recordings there showing the behavior of the whole process, both switching up and switching down. I thought I've done everything right here - paid attention to every documented detail, but it works rather poorly. Can someone explain whether this is expected behavior, if the players have implemented dynamic switching poorly, or if I'm doing something wrong?
I have created a video chat room by FMS/Flex. what I need to do is:
If everybody in one chat room can use rtmfp, we go with rtmfp if anybody in the chat room disabled his rtmfp, we go with rtmp.
Now I need to create a logic to decide if everybody can use rtmfp between each other, Is there a good way to do so?
I'm looking to duplicate the video-embedding technique shown on [URL], whereby they show the flash video to all platforms where flash is available, and only show the HTML5 player on mobile devices. (specifically, iphone / ipad)
Is there a browser-sniffing framework, or some other method available to accomplish this?
I have a problem with an embedded flash video not playing to the end, it stops around half way It is a 4 minute video with sound, the FLV file is around 24Mo This is a normal server not a flash streaming server .
I have at least 10 other sites on line with a flash video on the home page and they all work fine.on the same server.only difference is that this file is about 10 Mo bigger on average.
I contacted the company where my server is hosted and they say that it looks like a java script problem but I am using flash 8 pro standard <object> no java script to detect version etc.[code]...
I have a simple flash video player that streams the video from a streaming media server. The stream plays fine and I have no problems with playing the video and doing simple functions. However, my problem is that on a mouse over of the video, I have the controls come up and when I do a seek or scrub on the video, I get little weird boxes that show over the video - like little pockets - of the video playing super fast (you can basically see it seeking) until it gets to the point it needs to be at and then these little boxes disappear.
View 2 RepliesIs there any way to do dynamic video streaming in flash without using Flash Media Server (FMS) 3.5 as it's a very expensive software but using some open-source software or in any other way.
View 1 RepliesIts been two years since I built a video player and back then Flash was the only choice (just about). My question is if I want to stream a .h24 video over the web that is cross browser and platform compatible, has anything the ubiquity of Flash? How about Flowplayer?
View 2 RepliesI almost think it's impossible but I know little. I saw once on a website a streaming webcam video in fact it was live. I right-clicked it and it was in flash. Does anyone know how do streaming video with a webcam in flash?
View 12 RepliesI'm gonna make a streaming video in Flash.But I don't know how I'm gonna start,do you got some examples or good tutorials?Can I load the video from Internet or must it be in Flash?
View 1 RepliesI have embedded the video in flash in .mov format. Now I am looking for video streaming technique in flash.
View 2 RepliesI sent an email to pom regarding a tutorial that he wrote, but the email was bounced and he hasn't replied to my PM. I have followed both of pom's tutorials that involve experiments with perspective in Flash, but I have encountered a problem while attempting to duplicate a movie clip symbol in the second tutorial ([URL]). I have a single instance of the "ball" movie clip symbol appearing at random positions. However, I cannot seem to successfully duplicate the symbol instance at random positions using the loop that pom provided:
[Code]....
I have a flash object with 100% width and 100% height of a browser window. I will be streaming a video in this object.
How could I make this streaming video to fit browser window? 100% width for video. And vertically it should lay on middle.
I could not finad anything useful on google...
I've been trying to insert a video in a flash project that is hosted on a flash media server. I put the address wich by the way is [URL] and it doesn't work, I'm pretty sure that the address is right, am I misssing something?
View 2 Replieswe are looking forward towards developing a very interesting community portal that would help the user to broadcast their live videos across the community.I've been checking over sites like ustream.tv, justin.tv and wondering what/how Technology they been using to do so.
I am doing a lot of research over the last few days checking over the medium to do this effectively and figure out some of the leading companies in the domain like Ooyala.com, brightcove.com providing servers/technology to broadcast videos seamlessly across the globe.
I will be signing up with any of these providers soon.So my question is , how exactly would my website be catching with the live feed from the users cam, send the stream to ooyala/brightcove and further broadcast it to rest of the community users.
I'm trying to find a reliable yet cost-effective solution for hosting our small collection of .f4v videos. We're a small company so price is a major consideration. We also need the video to stream.I found Vimeo and it's cheap but they don't provide streaming.
Viddler looks like a good solution. It's is a little more expensive but streaming is available.We're trying to avoid enterprise solutions such as Akamai, etc.Any others out there?I also know about Red5 but prefer to have it hosted.