I am working on Flash,Php site.Currently the Flash Developer calles my page called createJPG.php and sends me an image data.I recieve this data and create JPG from the Data.
What i want is, when the Flash developer send me data he can show a loader and when create JPG process is complete he can hide the loader.For this i want to pass him variable with value 1 as soon as the CreateJPG process is complete...
how to put the code into the HTML file to complete the clickTAG process for a banner ad.
I have put the following code onto the button (covers whole ad):
on (release) {
clickTAG = "http://" + clickTAG.slice(7);
if(clickTAG.substr(0,4)=="http") getURL(clickTAG,"_blank");
}
but I need to know what to do with the HTML doc....Is this how the ad goes to the intended location like a regular URL link would?
I'm trying to get a loader working in a flex web application, but it isn't responding to the complete event. Is there a change I should make to the code here, or some way that I can handle an error event to get more information?
var loader:Loader = new Loader();
loader.cacheAsBitmap = true;
var request:URLRequest = new URLRequest("logo.png");
[Code]....
[Code]....
As you see from the code above I have a loop that loads images on each pass using the same loader. This works, however, it is looping too quick (I believe) and as such the "addBook" function that handles pushing these into an array is pushing them into the array in the wrong order. Two questions: (1) Am I approaching this incorrectly? (2) If not, is there a way to listen to the loader event so the loop proceeds only after the load of that image is complete?
ive been creating .FLV videos using premiere. Inorder to view them in IE, do I need to use the 'Flash' software to create a .SWF? I'm a little lost in the process post edit --> web
View 4 Repliesi'm currently develop a flash map for navigation the problems is i dunno how to write the code to calculate the distance with using a red dot to show the navigation process... e.g From Top shop(obj A) to H&M shop(obj B)(use code to load the process by move the red dot),but how do i write the code to multiple access to different place such as obj C ,and etc... or Obj B to obj A.
View 3 RepliesI dont know how to show the current progress in progressBar component when the process is a loop that requires a lot of seconds to do the job. Inside the loop, i setProgress and update the progressBar label in every cicle, but it is not shown up to the job is done. I dont need this, because i want to see the advance of process.
View 2 RepliesI have Flex call a C# dll which starts a long batch process (10 minutes). This process is actually a PERL program which periodically outputs progress messages. I want to be able to stream these messages back to a text area in Flex.
View 1 RepliesI have made four complete flash sites and I m about to create the fifth one, but every time I start creating a new one I get into a debate myself on what would be the better way to create the site with all its different sections (home, contact, about, etc... ). Should I create all sections in one .swf file or shoud I create .swf files for each section and load them as needed?
View 5 RepliesI generate thumbnail images for an XML file. So I loop through the XML and generate instance of a thumbnail class. These thumbnails are place in a sprite container.The problem I have is that after the loop I print the width of the sprite (in the same function) and it returns 0, even though its full of thumbnails. So I'm trying to add a listener that listeners when the thumbnails have completed being created but I have no idea what kind of listener I need or what to attach it to.
View 1 RepliesI'm having troubles with a external movieclip(chat), using a loader to call it. I ve a Role Game and when i make click over a button, it calls this external chat and all it's ok with him but the login button.. This chat, has their own classes and packages ( really I'm reclying a code of Gil Beyruth, multiplayer game) and when I play just the chat ( localhost/chat.swf) works ok... but when I open it from my main movie ( localhost/game.swf) by means a Loader, the login button( chat) appears disabled.
View 2 RepliesI'm loading in a jpeg and sometimes the Event.COMPLETE is never fired. I have a ProgressEvent that traces out the bytesTotal and bytesLoaded... and it goes all the way up until the bytesTotal equals bytesLoaded... but randomly, the Event.COMPLETE is never fired!
View 3 RepliesI have a really simple class that loads in some XML and splits it into an array, but for some reason the URLLoader wont trigger the COMPLETE event.
Code:
package com.georgecrabtree {
import flash.events.Event;
import flash.net.URLLoader;
[Code].....
how to go about creating a flash banner that when clicked navigates to another location in the timeline
View 1 RepliesI've got a loader that I put an event listener on for Event.COMPLETE. I then add it as child of the stage and call the load method. The swf it's loading appears on the stage, but the Event.COMPLETE listener is never called. I can attach a MouseEvent.CLICK event to the loader and that works just fine.
[Code]...
I've one loader which load a png file. I used contentLoaderInfo to intercept COMPLETE event like this:
loader.contentLoaderInfo.addEventListener(Event.Complete, handler); The problem is that at the complete event I want to push this object into an array, like this:
function handler(e:event){
var array:Array = new Array();
array.push(e.target);
}
E.target is the reference to the contentInfoloader, while I need the reference to the loader itself. How can i resolve this issue?
I have confirmed to my satisfaction that the following code never triggers the Event.COMPLETE of var loader:
var loader:URLLoader = new URLLoader();
var req:URLRequest = new URLRequest(contact_url);
var variables:URLVariables = new URLVariables();
loader.dataFormat = URLLoaderDataFormat.VARIABLES;
req.method = URLRequestMethod.POST;
[Code] .....
However, it does in fact send the emails it is designed to send! Why doesn't it complete when in fact the work is done?
So, I'm trying to load resources, add them to a dictionary, and have a drawing method search through that dictionary and draw based on certain predicates. I have a function that iterates through an Vector of Strings, calling on an instance of Loader to load them instantiated as a URLRequest.
private function loadImages(urls:Vector.<String>):void
{
var loader:Loader = new Loader();
[Code].....
So the issue is: Only the first images in my Vector are drawing. Upon further inspection, I found that the completeHandler was only being called once (I put a trace in the complete handler to check). However, the Loader is invoking load everytime the loop iterates. I tried instantiating separate loaders for each resource, just to see if it would work, but I had no luck with that. Do I need to make separate loaders and event handlers? Or am I just not using Loader correctly?
I've got a custom Thumbnail class that reads in an image path, a label, and an index. The class simply loads the image and and onComplete it pulls the bitmap out of loader.content, assigns it to a public variable and then dispatches an event saying its completed.
I use these thumbnails in a thumbnail gallery and I don't build the gallery in until all thumbnails are loaded and ready. The problem is the COMPLETE event doesn't always fire for every thumbnail, therefore not allowing the gallery to build.
I used a ProgressEvent.PROGRESS to make sure the files were being loaded, and found that when the loads failed the loader still loaded the totalBytes.
I've also tried Event.INIT and its the same issue.
INIT and COMPLETE just don't seem to be either caught or dispatched.
Code:
public class Thumbnail extends Sprite
{
/******************************************************************************************
* VARIABLES
[Code].....
I have a Loader class which I'm using to load an image:
Code:
var request:URLRequest = new URLRequest('https://some website path to .png');
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, error);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
[Code].....
The code above works when I run it from FlashDevelop but fails when it runs from a website. The domain is protected by a crossdomain file which allows the website I'm calling it from. I've tried other https requests to the same domain using URLLoader and those work fine. This code never calls Event.COMPLETE or IO_ERROR and no alert error comes up.
When the content loads I display it. When the content fails to load I display a default message. This works locally fine. I can load the image or unplug my internet connection and get the default message. But on remote systems that I am testing, it seems like the Loader is timing out, and displays neither the content or the default message.
View 3 RepliesI have an array of loaders loading .jpgs. After the Event.COMPLETE fires, I trace the content at the current page and it tells me the content is null, BUT on testing the images appear just fine. Here's my code:
Code:
for (var i:uint = 0; i<pages.length; i++){
pages[i].contentLoaderInfo.addEventListener( Event.COMPLETE, loadImg, false, 0, true );
[code].....
i'm loading in multiple images using the same loader using a for loop. what i'm trying to figure out is how can i tell when the first 4 images are loaded. is there away to attach and index to each loader and then get it from the event in the on complete function? below is the code i'm using:
[Code]...
I want it to return a MovieClip but only after a Loader has triggered its COMPLETE Event.
like so;
Code:
static public function loadBitmap(URL:String):MovieClip {
// create MC
// create Loader
[Code].....
but it isn't fool proof because the MC is returned before the Loader finishes loading.
I was having an issue with a Flash AS3 SWF Preloader stalling in Google Chrome only, Mac or PC, when JavaScript is disabled. It's fine with JavaScript. I diagnosed that the contentLoaderInfo Event.COMPLETE was not being fired. The successful workaround was to use the ProgressEvent.PROGRESS to check when the bytesLoaded >= bytesTotal. This worked OK in a relatively simple Flash application, however I also have an MP3 player, using a loaded XML file, MP3s, a thumbnail and other images. I am reluctant to plunge into the same workaround without first asking the question - when the bytesLoaded >= bytesTotal IS THIS THE SAME AS Event.COMPLETE? Or could I be faced with an error when trying to access either the event.target.data or event.target.content (depending on using loader or URLLoader class as required) to get the object in question?
View 1 RepliesI am a bit stuck here for the past few days. I have a SWF running in Security.LOCAL_TRUSTED sandbox. I can load my JPEGs and simple SWFs without any problems
[Code]....
I have created a pie preloader(preloader.zip) which is working fine. Same preloader I am trying to incorporate in a xml based slideshow(slideshow.zip) to show image loading process but some how I got stuck. I am new to flash. Suggestions are welcome.
1. How to solve the problem of preloader2. Is it possible to integrate everything in a movie clip (including AS). I mean no AS on main time line but inside the movie clip. It would be much easier then to to create multiple slideshows by duplicating mc and changing the xml file.
is it possible to create a pre-loader using plainly Flex 4? I've seen tutorials on how to make one but each of them requires that I have Flash Professional or Flash Catalyst. I have absolutely no experience when it comes to implementing pre-loaders as well as making one.
View 1 RepliesI have been looking over the internet for a while about this, but it doesn't seem like there is any information available specifically related to captcah and flash.
My purpose is to create an image up-loader on flash, and implement "recaptcha" on it, so the upload is controlled.
I know that some people will say, "well you can't automatize flash input so you don't need captcha in this situation" even though this is somewhat true, there is still screen macro programs that could potentially make the computer upload hundreds of pictures if there is not something in place to avoid it.
I thought of implementing my own captcha but that seems to me like i would be reinventing the wheel, can anyone point me on the right track for this? or suggest another approach to avoid abuse on my image up-loader flash?
I have a SWF file that is the first frame of the movie and it's only purpose is to load in another SWF and show text corresponding to the progress of download completion. When I test the movie (Simulate Download) it just simulates without showing my text with percentage complete. The only way I can get it to show, is if I add a button to click to make it show. How can I get it, so that when someone opens the movie, it will start the download process, show the percentage, and then upon completion, start the UILoader movie?[code]...
View 9 Replies