This is my first time ever constructing a web site ONLY using Flash 8. I normally just use elements here and there, and I am totally confused. The link to the project is here: [URL] I want the site to be set up so that when I click a button (at the bottom), an external .swf file loads into that gray box in the center. How do I start? Where do I start? I should be able to figure this out, but I am stuck.
View 1 RepliesI need to create a button with script, on rollover load an external swf into movieclip in AS3. This was able to create this in AS2, but I need to create this in AS3
View 3 Repliesi hav one main swf inside which iam loading second swf, but instead of hardcoding it, iwant the secound swf to calldynamically using variables.
The querystring is as follows:
<PARAM NAME=movie VALUE="film.swf?extSwf=movie.swf">
This method works fine:
[code]....
i load external movie with loadMovie action.
It loads the SWFs into the movie correct.
I have problem, how simply switch between the loaded movies. The last loaded movie overlay all loaded movies.
How is possible do it the swap of the loaded movies?
I've been trying to use loadMovie to load external SWFs into 200x200 MCs arranged on the stage. What I get is a strange placement of the loaded movies, and, the loaded movies don't appear as they should. The loaded movies are really all the same: they display 4 squares that change randomly every 3 seconds.
1) The loaded movies seem to use their center point as the registration point instead of the top left corner. Why? How can this be changed?
2) The loaded SWFs ("1.swf", "2.swf", "3.swf") get transformed from 200x200 pixels to 100x100 pixels. Why?
We sometimes get swfs at my job that doesn't match our standard banner width and height. We only have the swfs and not always able to get hold of the *fla.So we want to load the swf into our different standard banner size and show it.
How do I load the swf into a new *fla that has my standard stage width:995 and stage height: 150? Without distorting the swf to much. Swf could be loading into a MC or loading directly onto stage.I tried the loadMovie and loaded the swf into a empty MC. But I can't set the MCs width and height.
I would like to load and display an external jpg before my main preloader begins.
Basically this is for a game and I would like to display an advertisement jpg then keep this up while the game preloads.
I tried the following code on the first frame but it doesn't seem to work.
Code:
var myLoader = new MovieClipLoader();
var myListener = new Object();
myListener.onLoadInit = function () {
[Code].....
I make preloader.swf and videochat.swf I make a background for my videochat, and i cut it to 15 pieces, and make 15 .swf in my forlder /skins/ I make a .xml files called skin.xml in folder /skins/
something like this.
Code:
<?xml version="1.0" encoding="UTF-8"?>
<Skin>
<SKIN_BKGROUND>
<BKGROUND name="Standard" value="bkground.swf" />
[code].....
Now i want my preloader load skin.xml and load all the .swf in my xml and at the end it load videochat.swf I need the example to preloader everything with 1 progressbar % how i can paste the .swf background in my videochat.
I've made a component to control the movieclip in the main timeline. The instance name of that movie clip passed as a parameter to the component. That is working fine in that file. But when that file loads into another SWF file, that containes a movieclip to hold the file that is being externally loaded, the methods are not working in that componentThis is the code of the component.
#initclip
function visiblerClass() {
this.what = this.insofitem;
[code].....
I've made a component to control the movieclip in the main timeline. The instance name of that movie clip passed as a parameter to the component. That is working fine in that file. But when that file loads into another SWF file, that containes a movieclip to hold the file that is being externally loaded, the methods are not working in that component.
This is the code of the component.
//------------------------------------------------------------------------------
#initclip
function visiblerClass() {
[Code].....
I have 2 flash files,one is mine (the main container) and one is a external swf.I want to load the external SWF to my container SWF.I write this code in my AS2 container, inside the main timeline flash (mine flash).In the first method, I add a movie clip with instance name mc1 to the first layer:
mc1._lockroot = true;
mc1.loadMovie("external.swf");
countdown = function(){
trace("ok");
}
countdownIt = setInterval(countdown,1000);
This code works fine in most of the cases, but I found many SWFs files that it dosen't work with. These SWFs and work with the following code instead:
loadMovieNum("external.swf",0);
countdown = function(){
trace("ok");
}
countdownIt = setInterval(countdown,1000);
I really try to use that code - BUT !!! -> if I use this code the external SWF predominant, my main SWF code and all the rest of my code dosen't work (like the setInterval() timer).... I want to load the SWF like the second example and still run the setInterval() function.
I'm trying to use a loadMovie function inside a loop to load external PNG files when my game is loaded. Unfortunately, I can't get even a single loadMovie to work correctly, much less execute a bunch of them.The code is on the root time line, and is targetting an empty movie clip that is nested inside about 3 levels. There is a button, with a movie clip on it, and the empty clip I'm trying to load into on that.so the full target path is myBox_00.smallBox.myLogo(myBox_00 is the button, smallBox is the movie clip, and myLogo is the empty)[code].I even tried using a JPG image instead of a PNG and still no luck. The best I could do was number 4; and that didn't work, all it did was SOMETHING instead of NOTHING... unfortunately that something was to make the button (myBox_00) disappear entirely T_T.I've never had much luck with loading external images. What am I missing here?
View 9 RepliesI have a photo gallery I developed using AS2 in Flash 8 Pro. You can find it at [URL]. I used a loadMovie to import different swf files into the main swf file when a button is clicked. It works great in Firefox and Safari but suddenly stopped working yesterday in IE. It worked in IE (6, 7 and 8) since last Friday when I uploaded it but stopped yesterday. I am using IE on Windows XP. I did try IE on Vista yesterday when I started having trouble with my XP IE and it seemed to work...however, this morning I can't even get my IE Vista to come up so am not sure it is still working on that version. I removed the preloaders that are in the imported swf files but it didn't help so I put them back in. I am using the following code in my html to embed the flash:
[Code]....
We have used loadMovie to load some small SWF files on a home page we have made. The swf files are in different sizes and we need to be able to set the size. How do we do this? We hoped the problem was solved with the following code, but this code only sets the size of the variable "minRamme", the contents are still to big, resulting in only a part of the swf file being visible. Anyway the following code ignored the onRelease command, so the swf file started playing at once. How come?
knapp.onRelease = Function(); {
minRamme = this.createEmptyMovieClip("clip",0);
minRamme.loadMovie("ann kristin.swf");
[Code]....
i am haveing a serious dilema with the loadmovie AS... ll make everthing as clear as possible.. main timeline 1st frame i have script for a menu... when u click an item in the menu it kicks you to a frame label "simple" in the main time line. in simple i an am trying to load an external swf "simple.swf".. i have tried everything and racked my brain but i cannot get flash to laod simple.swf...a nd on the off chance i do get it to load i am unable to position it with _x,_y...
View 1 RepliesI am trying to load, unload and load again the same movie clip from library.
View 7 RepliesThe desired affect is simple: I have a single button... with each click I want it to load text into a dynamic text field and load a corresponding picture or movieclip.There are only three unique text/image combinations- after its displayed the third, with the next click I want it to just start over. All the text functions perfectly with each click.
The problem is:I use "createEmptyMovieClip" then use the resulting clip as a loader clip.. With the first click I want a movieclip from the library to load, so I use the "attachMovie" method- it displays the first library fine.With the next click I want to load an external swf- so I call the "loadMovie" method of the loaderclip... The external swf loads just fine replacing the first library clip.The third clip is where I have problems... now I want to load another library item into the loaderclip... so I tried using the attachMovie method again but the external swf remains static... then with the next click, I discover the first library item no longer loads and the external swf remains still playing- it's like once it's been loaded into the loaderclip it cant be moved...
So I tried adding the "unloadMovie" method in the code for the third click.. it successfully removed the swf... but the next line of code immediately after the unload statement, doesn't work. The line calls the attachMovie method for the loaderclip... but the library item doesnt load... Oddly enough, with the next click, the first library item now does load as if everything's fine... It seems like you cant use the unloadMovie and attachMovie on the same executing code? if that makes any sense... the basic idea was that if I couldnt get the attachmovie method to replace the loaded external swf, then I would use the unload method to remove it, then have code immediately after, to then execute the attachMovie method... but it still doesnt load the library clip. and I know it's not a type-o, because when I comment out the loadMovie and unloadMovie statements, it loads both the library items perfectly ? The code is below
var increment:Number = 1;
var verbiage1:String = "Hello World1";
var verbiage2:String = "Hello World2";[code].............
but i just can't figure it out. I've made a website in flash, with a button. The purpose is when you click one button, a portfolio will open. This portfolio is xml driven and i've got the FLA file and the SWF file.
But.. when i put the portfolio FLA file in my website timeline it won't work, and when i try to use the SWF file instead and connect it to the button using AS2.. it won't work at all. The last option i used the following AS2 codes and put the code on the button frame.. that didn't work (not at the same time offcourse ):
[Code]...
This last code did work.. but for some strange reason this last code loaded the SWF again and again...
Is there someone who knows what i'm doing wrong? I just want that the portfolio opens when you click on the button.. and opens in a container with certains measures.
I have a flash movie that loads an external image into a movieclip with the following code:
Code:
//Load image
loadMovie("myimage.jpg",_root.moviebox.picturebox);
[code].....
I need to do is load an external swf into a movieclip and make sure it stays within a certain size.
1. How do I make it a set size? Instead of it inheriting the root timeline height/widht. ie: my main movie is 900 x 900 the external swf is 700 x 500 and there are mouse moves that rely on the 700 x 500 boundaries.
2. How do I make this: loadMovie("external.swf", "load_mc"); utilize MovieClipLoader?
Trying to load swfs with loadmovie script. They load fine but when close window button is pressed the Main movie behind it dissappears to blank screen.
View 2 RepliesI''m currently working on a school project, but I'm having issues with getting the flash loaded with loadMovie. I've read on several forums how to use the command, If I use the command, it loads the flash file. But all variables are undefined and the movieclip in which I loaded the swf file also remains empty.
I've tested the situation with a random jpg and this works.
I'm getting kinda desperate, since I've first tried to use scenes without succes..
When I try to use loadMovie, it will not load to an instance (unless it's something that's in the same directory). I figured this was some sort of security thing, but I was able to load the movie into _root just fine.
View 1 RepliesI'm using loadMovie to load a jpg into my movie. When I do, I can't see any of the stuff that was in the movie before (even though it's not in the container MC) Is this a known thing? How can I fix it?
View 6 RepliesI defined var image which I use for URL to loading content of XML file. I dont how can I define it to have var image outside of XML_images.onLoad because this woks:
Code:
var XML_images:XML = new XML();
XML_images.ignoreWhite = true;
XML_images.load("xml/castillo_images.xml");
[Code].....
What im trying to do is use Flashvars to load an url in to a loadMovie.
I have a blank movie in a html page and i want to use that same blank movie over and over again with out have to reopen the flash movie. but i need to movie to pull different .swf. and i that what i though that i would use the Flashvars for but i can get it to work...
I was wondering if it is possible to dynamically load a YouTube clip using LoadMovie? If so, how do I set the size etc.?
View 3 RepliesI'm trying to load some swf movies using loadMovie, but I'm having the folllowing problem:
There are three movies: 1.swf, 2.swf, and, 3.swf.
=> 1.swf loads inside 2.swf
=> 2.swf loads inside 3.swf
When I test 3.swf, it plays only 1.swf (exacly where I put it in 2.swf - coordinates) but doesn't play 2.swf.
Everything looks correct, includind the containers.
All actionscript is in the frames and I'm using Flash MX.
i have a fla file in Flash 8 that i use for content center...and i'm trying to load a swf (some photo and text AS3) into it... but it just doesnt want to work... i have tried loadmovie, loadmovienum, none seems to work, the swf file is just not working the content file is working, its the preview.swf that is not,
View 2 RepliesI have a textfile called link with an url-address. I want to load that textfile and have that url instead of "goal" in this code.
knapp.onRelease = function(){
getURL(goal,"_blank");
}