I'm building a flash file in action script 2.0, and it works great except for one thing I'm publishing it as an .exe file, and when you open the .exe, it opens in a partial window and is partially off screen. I'd like the .exe file to automatically open full screen every time. Does someone have AS2 code for the flash file that would make this happen, or is there a way to accomplish this in the .exe file itself?
View 2 Replies
I create a .swf file and wanted it to load/open automatically as a full screen. I tried the following code but it only works with projector or .exe files. Curently user has to press F11 to open or close as a full screen. Here is my code:
fscommand("fullscreen", "true");
I am developping a as3 project for a kiosk that should run in full screen mode.I am using eclipse for the programming and Flash CS4 to prepare all the swf library assets.Once I publish the swf, I open it in the flash player and export the file as a projector file.
When I open the projector file it doesn't go full screen automatically.
Where can I set the project to go full screen?In the code?Or is there a preference setting for the projector file?Or another way to publish the projector file that will allow me to set the full screen mode?I remember using fscommand in as2 but that doesn't seem to work anymore.
Is there a way in AS3 to load the .swf to full screen mode straight away? The only way I can find to do it is by adding an event listener for the mouse or keyboard. Surely this can be done automatically at the start when the .swf is loaded?
View 1 RepliesIs there a way in AS3 to load the .swf to full screen mode straight away?The only way I can find to do it is by adding an event listener for the mouse or keyboardSurely this can be done automatically at the start when the .swf is loaded?
View 3 RepliesI want to enable full screen mode automatically when I play the swf file using adobe flash player (not embing it in the web page, just by running the adobe flash player alone), without select the 'view full screen' option. Is it possible?
View 0 RepliesI am trying to have a webpage automatically go to full screen when the viewer enters it. It works with the on/ off Buttons but it does not work with the enter_frame Command. Here is my code
import flash.events.MouseEvent;
//---full screen auto
stage.addEventListener(Event.ENTER_FRAME, onEnter);
//---manual Full screen
[Code]....
I know how to open a window with Flash so thats it's fullscreen with no browser.
ActionScript Code:
on (release) {
toggleFullScreen();
[code].....
I am working on a Flash app that is 900x700 pixels. When viewed in misc. browsers at 1024x768, the browser chrome causes robs too much of the vertical space and the app appears in a window with a vertical scrollbar. Unacceptable.
The flash app will be launched via a link emailed to the viewers.
I'd like to avoid resizing the flash app and am wondering if there's a way to do the following via javascript, with no clicks involved:maximize the current browser window remove current window address bar and tabs / switch browser to full screen view (equivalent to pressing F11).
An alternative would be to resize the flash app vertically to match the browser canvas height to avoid scrolling. This may cause the app to become unreadable, so not the best approach in my case.
UPDATE: Seems that browser resizing and autoswitch to full screen won't work and neither will the flash app auto resize. What is the best approach then? And, some users may have browsers with toolbars or open a small browser window.
The only idea I have is to use javascript and display a message to users with small browser windows to pres F11 manually. The audience is executes and some may not even know what an F11 means...
I am trying to make a flash site open full screen without having to hit any buttons,
View 7 RepliesI tested my skin for YouTube Chromeless player, and seems it worked properly.All graphic elements, including TLFTextFields, are stored in external SWF, all the AS3 code - in loading SWF.I use ProLoader class to load SWF.However, when I tried to attach Player skin code to my Home Page code, I immediately bumped into two issues:
1. TLFTextFields ceased to display proper font;
2. YouTube Chromeless player ceased to enlarge up to Full Screen width in Full Screen mode, whereas all publishing settings were kept the same...
Although I managed to cope with TLFTextField bug by replacing instances with vars in loaded SWF, I have no the slightest idea what to do with those paddings in Full Screen mode... Neither removing all children on stage before loading YouTube Player skin, nor compulsory resetting player's size can't make it work...
I wnat to display a FLVPlayback full screen the same as when you click on the Full Screen component button.
function goFullScreen():void {
vidPlayer.enterFullScreenDisplayState();
}
var vidPlayer:FLVPlayback;
[code]....
I am creating a full screen projector with flash CS4. In the projector I have more videos, starting from an swf player-
The problem I encounter is this:
The projector starts correctly FULLSCREEN (using AS). The video plays 900x506 correctly. If I click on the player, to get the video full screen, it works. But when I press ESC, not only the video, but also the PROJECTOR looses full screen.
This is a bit annoying. Is there a way to apply the "back to normal size" only to the video? I do not want to prevent the app to be exited from full screen, it's not a problem if the user wants to exit the projector full screen. But not when the user exits the video from fullscreen mode.
How to target only the video?
// for Full Screen stage.displayState = StageDisplayState.FULL_SCREEN;// for the normal screen stage.displayState = StageDisplayState.NORMAL;But this code does not fulfill my requirement. I need Vertical Scroll Bar, even I go to the FullScreen, but I don't find any Scroll with this code.Even I tried "window.open" of JavaScript with ExternalInterface, but I couldnot succeed.
View 2 Repliesi am creating an interactive application that will run independantly on a computer.I have implimented the full screen stage display state to a btn, and it works great!
-------code-----
import flash.display.StageDisplayState;
function goFullScreen():void
{
[code].....
however as soon as i add a video [i will be adding several] the video takes on the full screen property, and that is not the desired effect.I have used several diff ways to import the video but as soon as i call the full screen, it goes to an all black screen.
I'm trying to open my site in "full screen" I have a "front door" with just one button on it. I used the following script to open the site in FS.
[Code]...
i am wondering from this code, it makes the stage full screen, does it also makes the content of my movieclips scaled to full screen? i have tried this code and it does not seem to do that, how can i make my content to scale to fill a stage's full screen? i have a Movieclip containing a background with a class to make special effects on the background, i am having trouble making the background be "fullscreened" nicely with the stage.
View 1 RepliesI am creating a flash-based Kiosk. When launched, it runs full page/full screen. However, if a user clicks a button that opens an external document, the swf or Flash Projector exe leaves full page mode and appears in the Flash Player. Is there any way to ensure the swf or projector file always stays in full screen - full page mode?
View 4 RepliesI am working in Flash CS3 and Actionscript 3.0 My application resizes according to browser width and height. If the user first resizes the browser and then loads the flash application, I could not get the full browser width untill the user goes for full screen. Is there any way around, to get the full browser width before the user goes for full screen.
View 1 RepliesRegarding System.capabilities.screenResolutionX in FMX, how would I achieve a movie clip on my stage to automatically alight to the left of the screen/browser depending on the viewers screen resolution?
View 1 Repliesi am a beginner in action script / flex framework and i am facing a problem: i would like to have like a menu bar always anchor the bottom of the screen in normal and full screen mode... i try to set my component with bottom = "1" (so it should alway be at 1 pixel from the bottom of the stage ... But .. NO :)
[Code]....
I have an AIR application that will go full screen when the application starts:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE; The stage size is 2560 x 1024. And I have 2 moniters (1280 x 1024 , 1280 x 1024) When I start the application, it shows my application on one of my moniter only.
I need the left side of the stage to be shown in moniter 1 and right side of the stage to be shown in moniter 2. Currently, both sides are shown in moniter 1, and in moniter 2, it shows nothing but my default desktop. *The blue color line is a divider for better visual purpose. How do I make the left side of the stage to appear in moniter 1 and right side of the stage to appear in moniter 2 when the application starts in full screen mode?
Is a command for AS2 to make my movie file play fullscreen (stretch, fit to screen, anything).
goFullScreen(); is great but it leaves white bars left and right. What's odd is that I'm using Adobe Flash Media Live Encoder and it seems to display a perfect widescreen that I want as an input and output but once compiled in flash, it's more square leaving me with white bars left and right. The frame for the video in flash is also widescreen looking.
edit: I ended up stretching the width of the frame but if there is a better way through a command that would make my life easier so I don't have to adjust to every monitor that I run this on.
I have a flash app that contains a lot of data. Part of it has a video. I want to have an option to expand just the video to full screen mode. I have this working now, however it scales it proportionally based on the size of my flash app. Instead of doing that, how can I expand it to be 100% of the screen width?
Code:
function goFullScreen(base):void
{
if (stage.displayState == StageDisplayState.NORMAL)
[Code]....
I've been trying to attempt to make it so a .flv video will fit to the entire screen of the browser window. ( I already have my .swf file fit to re-size to any browser on any computer. I just can't figure out how to make the video as well) And obviously an external video so the flash file wont take forever to load.The point is this is to be able to have the Video be the background. So I may put content (Links, information or whatever else) on top of the video.
View 2 Replies[ X ] Problem solved I just came up with something i have some trouble to handle I've tried a couple of solution but none seems to work perfectly
What I'm trying to do is simple, get my flash to go full screen, but whatever resolution the user has, my flash must centers itself with the biggest proportion possible, and two movie clips goes right and left of it, as if they were borders.
I've been able to do this with a simple png, but i was not able with a movieclip where his dimension changes through time. ( i have a tween, so the mc gets really big even though just my stage is displayed)
I encountered on the building of my largest flash project to date. The project is a dvd-based presentation with audio, video and text that's xml driven.The project has been coming along nicely but recently a bug has popped up that I haven't been able to figure out. Here's what's going on:
There are three main sections in the swf, the intro screen, the main screen and the content screen. The swf is set to default to full-screen with the resizing and re-positioning of the elements built into a resize handler. Since each screen has different content, each screen has a different resize handler that is removed when transitioning to the next screen before the resize handler is applied for that screen.
For the first two screens, everything is working fine, but when you get to the content (third) screen (where the xml loads), the entire flash movie darkens, and nothing is clickable. This only occurs when the swf is in its default full-screen mode, if you escape full-screen the screen goes back to normal and the nav is clickable again. Also, if you've escaped full-screen mode before you reach the third screen, it remains normal and clickable.
I initially thought that it might be an issue with the event handler for the fullscreen, but the bug never appeared in previous versions with the same code. So I replaced the fla file with one that was not causing the bug and got a functioning swf out of it, even though it was including the same as3 files that the buggy file was including. I saved that file and sent it to the client, who has been successfully publishing from it without a problem. So I thought, problem solved, just a corrupt fla file. But now, any version of the swf that I publish has the problem, even ones that published fine earlier, and aren't using any of the new code that was being used when the problem started occurring. is it possible that my flash app has gotten corrupted or something? Has anyone ever experienced anything like this before?
My question is what needs to be done in order to make a .swf file go into full screen without falling to a black screen when a movie is played? I have tried coding it, however I come up with the following error.
[Code]....
What should I do to fix this? This is not going to be an HTML file, however, so the initial thought of changing the publish settings does not seem to work this time.
I'm creating a flash site. I want the flash movie to fill the entire browser window. What size should I make the canvas, I've been experimenting with sizes and a canvas size of 750*370 fills my browser well on a resolution of 800*600
How do you accomodate different resolution settings? What's the most commonly used canvas size for this type of project.
I am having a strange problem. When I go to full-screen mode in Flash, everything goes blank. The sound added keeps on playing and everything is fine on coming back
View 1 Replies
