IDE :: Changing The BitmapData.rectangle - X And Y Locations

May 2, 2009

I'm trying to take a 'snapshot' of a movieclip that i've got on the stage with "BitmapData" and then starting a "draw()" command on it. I'm able to get it drawing.. however.. it only takes the things from (0,0).( the upper left corner of the movieclip. Doing a trace on "BitmapData.rectangle" gives me it's X and Y coordinates .. and it's width and height..

How do I change the X and Y locations of the BitmapData for it to start the drawing from? As I have some stuff on the negative side of x.

View 1 Replies


Similar Posts:


ActionScript 2.0 :: Changing Object Locations Of MovieClip

Aug 23, 2006

I need to move a movie from let's say '_root' and put it into '_root.source.pages.ph' on level 0 in the current state that it is in....is there anyway you can do this using actionScript? DuplicateMovie starts the movie over at frame one and doesn't delete the old movie and swapDepths require the movie to have the same parent.

View 2 Replies

ActionScript 3.0 :: BitmapData Of A Rotated Rectangle?

Aug 5, 2010

I'm using following code:

ActionScript Code:
var bd:BitmapData = new BitmapData(stage.stageWidth, stage.stageHeight);
bd.draw(stage, null, null, null, new Rectangle(tmpX - (tmpW/2), tmpY - (tmpH/2), tmpW,

[code]....

View 9 Replies

Flash :: BitmapData.rect Creates A New Rectangle?

Jul 15, 2011

I was working on some blitting code today and after profiling it found that I was creating 1000s of new rectangles. I was shocked because I only had 1 or 2 different new Rectangle() calls or I was using the .rect property of BitmapData.

I started commenting out huge swathes of code until I was left with this code in my sprite class:

canvas.bitmapData.copyPixels(_bitmapData, _bitmapData.rect, destination, null, null, true);

I cached the result of _bitmapData.rect at object creation and my thousand of new rectangle calls were suddenly gone from the profiler.

Why the heck would BitmapData.rect create a new rectangle? Is there a way to check the core libraries or something and confirm this is true?

View 4 Replies

Actionscript 3 :: Apply ColorTransform To BitmapData In Circle Rather Than In Rectangle?

Jan 2, 2010

Is there a way to apply a colorTransform to a BitmapData in a circle rather than in a rectangle?

Instead of erasing rectangular parts of an image by reducing the alpha channel as in the code below, I'd like to do it in circles.[code]...

View 1 Replies

ActionScript 2.0 :: BitmapData - Calculations Of The X,y Coordinates Of The Rectangle Cropping ?

Oct 6, 2007

After seeing the I've been told that movieclips aren't suited for games, what do you use? thread, I thought I would try to incorporate the approach into a game I'm currently programming to make it a little less processor intensive.

I have a giant movieclip of a football field, of which only 5-10% is shown at any given time. I'm guessing that flash still has to make calculations for the other 90-95% of the field every frame, even though it's of no use. From what I understand (not much), copyPixels seems like the perfect candidate for such a situation.

It seems simple, but I'm having trouble actually implementing it, and I'm not sure which actions are needed and what might be introducing unnecessary work. I have a movieclip (mc_field, exported for as), but if it would save the processor some effort,I could easily save this as a bitmap and export that for actionscript. The width and height of the final product (bitmap/BitmapData) will be Stage.width, Stage. height,respectively,and I can handle making the calculations of the x,y coordinates of the rectangle cropping (which part of the source bitmap I want to crop).I'm sure it's only 3 lines of code, and I know that there are a few examples online, but for some reason.

Say, for frame one, I want to take the field (either mc_field or bm_field) and copy 500px x 300px, starting at 140,230 from the source bitmap to mc_container.Then, for frame two, I want to copy 500px x 300px starting at 240,540 from the source bitmap to mc_container.

View 4 Replies

Actionscript 3 :: Bitmapdata - GetColorBoundsRect - Find The Rectangle Area Or Each Circle

Jun 20, 2011

I have a BitmapData with 2 red circles. I want to find the rectangle area or each circle. If i use [B]getColorBoundsRect[/B] I get the smallest area enclosed by the 2 circles. How can i go about this and get individual area of the circles?

View 1 Replies

Actionscript 3 :: Use The Method SetPixels(rectangle, ByteArray) Of BitmapData In Adobe Flex

Feb 3, 2011

Error #2030: End of file was encountered.

This method is not working

I am using it like this

var ba:ByteArray = new ByteArray();
ba = bmd.getPixels(bmd.rect);
bmd.setPixels(srcRect, ba);
bm.bitmapData = bmd;
img.source = bm;

View 1 Replies

ActionScript 2.0 :: Changing Color Of Rectangle Done With LineTo

Feb 27, 2010

I have a rectangle drawn
Code:
line1.clear();
line1.beginFill(0xFFFF00);
line1.lineStyle(4, 0x000000);
line1.moveTo(_root.point1._x, _root.point1._y);
line1.lineTo(_root.point2._x, _root.point2._y);
line1.lineTo(_root.point3._x, _root.point3._y);
line1.lineTo(_root.point4._x, _root.point4._y);
line1.lineTo(_root.point1._x, _root.point1._y);
line1.endFill();
line1._alpha=10;
updateAfterEvent();

After the rectangle is drawn I have a button that inactivates the points. I can now change the alpha of the rectangle but not the color. Is there a way to change the color of the rectangle line1? I have tried with
line1._color=0x000000;
But it doesn't work.

View 2 Replies

ActionScript 3.0 :: Changing Color Of Focus Rectangle

Dec 10, 2009

I would like to change the color of the focus rectangle. The default is a yellow color. This is not on a component.

View 1 Replies

ActionScript 3.0 :: Changing Rectangle Sizes Smoothly?

Nov 8, 2011

Anwyay, what I want is for the user to hover over an object, then there is this a rectangle to the left that I want to change size. Is there an easy way to do this? I want the rectangle to become greater in width but maintain the same hieght/stroke and everything.Also I don't want it to just "pop" to the new size I want it to ease to the new size. Does that make sense? Like I want the user to see the rectangle grow in size depending on what object they hover over.

View 3 Replies

ActionScript 3.0 :: Changing Border Color Of Rectangle On Mouseover

Oct 24, 2010

I have a rectangle and I want to change its border colour on mouse over, I have found a way to make it work but that redraws the whole rectangle, i am wandering is it possible to only manipulate border colour without redrawing rectangle?

PHP Code:
import flash.display.Sprite;var rect:Shape = new Shape();rect.graphics.lineStyle(3, uint("0x666633"));
rect.graphics.beginFill(uint("231f1c"), 1);
rect.graphics.drawRect(0 , 0 , 60 ,10 );
rect.graphics.endFill();
[Code] .....

View 1 Replies

ActionScript 3.0 :: Changing Alpha Of A BitmapData?

Jan 11, 2010

I'm blitting a map onto the screen with tiles.. and the source of these tiles are BitmapData objects.I know you can change the alpha of a bitmap.. but I'm not too sure if it can be done on the BitmapData object itself.I want some tiles to have less alpha than others. Applying the alpha to the Bitmap.. makes everything on the current screen have an alpha.. but I only need one tile of it..

View 4 Replies

ActionScript 3.0 :: Changing Opacity Of A BitmapData

Apr 12, 2011

I am trying to create a Photo Editor using Flash One of its features is to change the Opacity of the Image. Now my problem is how to change the Opacity of a bitmapData and save the image so that the resultant image has a changed Opacity.

View 2 Replies

Actionscript 3 :: Scrollbar With Sprite And Rectangle Won't Move Text, Just The Rectangle It's Painted On?

Mar 8, 2010

For those of you still with me, I am tasked with making some scrollable content in Flash. Load in a TextFile using LoadURL(), then display it. To get the text, we've written our own class TextFieldExtended, which is basically just there to give the textfile location to the constructor and then have the class do the various steps of getting it and loading it for you.So I needed to get a Scrollbar, which I got hereThe thing is, it works with Sprites.After trying to get it to accept TextFieldExtended, I bumped into a block, since the scrollbar relied heavily on a Sprite property that TextFieldExtended didn't have or could have.

So I tried adding the TextFieldExtended instance to a Sprite instance using addchild.A problem occurs here that I do not know how to handle. It seems that a Rectangle is drawn and the Text is drawn on that. I say this because the scrollbar moves the Rectangle up and down a bit, but the text doesn't scroll, just the Rectangle it is positioned in and the text then moves along with it.My question: can this be fixed, or is does this implementation of scrollbars need a lot of adaptations before this is possible?

View 1 Replies

Draw Rectangle Should See Little Bold Circle To Indicate A Perfect Rectangle

May 20, 2009

I draw a rectangle i should see a little bold circle to indicate a perfect rectangle, I seemed to lost mine, can somebody please tell me how to get it back!

View 2 Replies

ActionScript 3.0 :: Convert Rectangle To Curved Rectangle?

Aug 2, 2011

I am trying to convert a rectangle(actually multiple rectangles) to a curved rectangle. I think it should be pretty easy but I guess i am stupid. Basically I would have a start position and stop position (many of these), and they would be converted to curved rectangles and follow in a cicrle around.

View 0 Replies

ActionScript 3.0 :: Creating A Rectangle Inside Of A Rectangle?

Jun 26, 2010

I would like to create a rectangle inside of a rectangle, starting approximately 15% inward from the right side of the other rectangle.

I know how to create rectangles with:

Code:
var newHotRect:MovieClip = new MovieClip();
newHotRect.graphics.beginFill(0x00FF00);
newHotRect.graphics.drawRect(0, 0, 100, 100);
addChild(newHotRect);

But how would I make another rectangle on top of that (the black one pictured) that is approximately 15% from the right?

I toyed around with .right, and .bottomright with no success. Can anyone lead me in the right direction? or even finding the x and y of the upper right or bottom right side of a rectangle?

View 10 Replies

ActionScript 3.0 :: Rectangle To Rectangle Collision Response?

May 20, 2011

how to respond when a rectangle hits another rectangle? I already know how to detect the collision, I just don't know how to respond to it. I'm just trying making a simple side-scrolling platform game where I have platforms I can walk on and bump against on all sides. I have searched everywhere and just can't find the tutorials I'm looking for.

View 6 Replies

ActionScript 2.0 :: Flash 8 BitmapData - Getting Error : The Class Or Interface 'BitmapData.loadBitmap' Could Not Be Loaded?

Jan 31, 2007

I'm using Flash 8, with this code in the first frame:

import flash.display.BitmapData;
rissa._x=Stage.width/2;
rissa._y=Stage.height/2;[code].....

When I publish the file, I'm getting the following error message in the Output panel:

**Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 7: The class or interface 'BitmapData.loadBitmap' could not be loaded.
var plaid:BitmapData.loadBitmap("plaid");

Total ActionScript Errors: 1 Reported Errors: 1

View 8 Replies

ActionScript 3.0 :: Error #2015: Invalid BitmapData At Flash.display::BitmapData()

Oct 14, 2009

I am trying to use the reflect class from "http://pixelfumes.blogspot.com/2007/03/reflection-class-v3-with-source .html" but I keep getting this error:
 
ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData()
at Reflect()
at Site_fla::GalleryPage_29/loadThumbs()
at Site_fla::GalleryPage_29/sortXML()

[Code]...

btw, first I used assigned thumbContainer as the mc argument (outside the loadThumbs() function) and it worked but not exactly what I wanted... because I thought it is supposed to update when the movieclip is animated but it actually didn't... when I use a scroller, only the thumbs that are first loaded to the stage get the reflection..

View 10 Replies

Actionscript 3 :: Quickly Rotate The Pixels That Make Up BitmapData Without Using BitmapData.draw()?

Dec 29, 2011

I've been using BitmapData.copyPixels() to draw graphics onto a canvas (Bitmap).I need to rotate the resulting graphics without the use of draw() because it's vastly slower.How can I rotate the target graphic? I'm assuming that there might be a formula or library that I can use which will first reorganize the pixels that make up a graphic based on an origin (point) and radians.I'm pretty certain that I'm not capable of creating such logic, so if there are any known libraries that do this, that would be awesome.I'd like to achieve something similar to XNA's SpriteBatch.Draw() method, which accepts rotation as its 5th argument.

View 3 Replies

ActionScript 3.0 :: BitmapData.hitTest - What Angle Or Coordinate Of The BitmapData The Collision Happens?

Sep 1, 2011

how to use the bitmapData collision method. Now I'm trying to figure out if there is a way to see at what angle or coordinate of the bitmapData the collision happens? I need it in order to figure the accurate bounce angle after the collision occurs.

View 2 Replies

Flex :: AddChild A BitmapData Or Draw A BitmapData To Screen?

Jul 15, 2009

I'm currently working on a flash game and I need to know how to addChild a BitmapData or draw a BitmapData to screen. If I can't than how can I give a DisplayObject my BitmapData?

View 2 Replies

ActionScript 3.0 :: BitmapData = New BitmapData(); Eating Up Memory?

Dec 22, 2011

I've made a mobile version of my software, with low-res images and such, and I can now fully buffer all my content (including a 360 frame animation which is buffered to memory). Problem is, that everytime I update the view, more memory is used.When I write image = new BitmapData();, does it store the previously created BitmapData's in memory? Do I have to flush the memory somehow before I draw my second picture in BitmapData?Example:

ActionScript Code:
// In this example I draw using the same bitmapData several times, also
//overwriting the first image. Do I have to somehow delete the data first, to

[code].....

View 1 Replies

Zooming To Certain Map Locations?

Oct 27, 2009

how to zoom into(hence zooming the map outward) set locations on a map, yet only those locations. I have a script which will zoom to your mouse location and also if I set the specific x and y, but still zooms when clicking on any other spot.

how do I zoom to only a set location and nothing else within a map/image.

View 38 Replies

ActionScript 3.0 :: Using BitmapData.draw(stage) - Error #2123 Security Sandbox Violation: BitmapData.draw

Jan 9, 2012

I am having an issue with using BitmapData.draw(stage). I am getting the following error:

SecurityError: Error #2123: Security sandbox violation: BitmapData.draw: file:///C|/Documents%20and%20Settings/bla...bla...bla.swf cannot access null. No policy files granted access. Here is a portion of my code:

var bd:BitmapData = new BitmapData(2800, 2100); bd.draw(stage);//this is where the error happens All of the files referenced (.xml/.jpg/.swf) are located in the same local folder as the main .swf. How do I get around this error? The main objective is to print the stage using PrintJob(). I am using Flash Professional CS5.5 and publishing to Flash 10.0/10.1. Let me know if I need to supply any more info.

View 4 Replies

ActionScript 2.0 :: Interactive Map And Key Locations

May 25, 2009

I'm doing a project in flash. What I'm trying to do is have an interactive map and have key locations you can click to view a popup and using xml call in data such as thumbnails, images and information. I've also created a scroller so when you click the arrows the map scrolls left to right except I want to make it so that when you click the arrow right for example when the map gets to the far right edge the arrow greys out (to signify that you can no longer move to the right) It's complicated to explain so here's the assets in a zip file: [URL]

View 3 Replies

ActionScript 2.0 :: Make Locations On A Map?

Feb 24, 2003

I am getting ready to start a new project that about club located all over the world. I would like to make a map that locations pop-up on dynamically, like on

View 8 Replies

ActionScript 2.0 :: Two Icons Are In Different Locations?

Jun 18, 2010

there are two icons that become visible when a mc is selected, a small crosshair and a small circle. Sometimes they're in the same place, sometimes not. I understand the small crosshair is the origin, where all transforms originate from, but what's the circle, and what does it mean when the two icons are in different locations?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved