how this site was made so that it fits every browser window completely, with no borders or distortion to the site? http:[url]....I want my site to fill the screen and the only way I know is 'exactfit' in the html but this stretches the file on certain browsers.
View 8 RepliesI'm using Adobe Flash CS4I'm currently trying to fit a flash intro inside the browser window (height 100%, width 100%). I've tried changing the height, width attributes but with no luck. What am I doing wrong?
View 1 RepliesI have tried everything to get my Flash movie to completely fill the browser but to no avail. I have made the dimensions 100% w + h as well as making all the margins 0 px. Am I missing something as when I compare my HTML source code it seems the same as others but the result is with me having white borders around the published file.
Here is the link for the source code.
[URL]
I know I can use the Multitouch capabilities in AS3 to recognize pinch/zoom gestures etc., which I can use to zoom in on object in my movie. Can I set it up differently, so pinch/zoom effects the entire browser window? Basically treat a pinch zoom in flash as if they did it somewhere in the browser. For example I'm testing a flash animation on a droid tablet. When the html page loads, I can pinch zoom on the flash object as if it's not even there. But after I've "clicked into" the flash object to interact with it, pinch/zoom no longer does anything.
View 0 RepliesI am currently editing a flash file in Adobe Flash CS4 and editing the HTML file in Dreamweaver CS4. The Flash document settings are set to 31 fps 766 px (width) by 780 px (height) resolution.
Under publishing settings in Flash CS4 I have it set to Flash player 8.0 in the flash tab. Actionscript 2.0. In the HTML tab I have the Template set to Flash with FScommand. Dimensions set to 100% by 100%. Quality set to best. Window mode set to opaque windowless. HTML alignment set to top. Scale set to no scale. Flash alignment set to left (horizontal) and top (vertical).
Under page properties in Dreamweaver CS4 I have the CSS and HTML set to 0 margin dimensions.
I have taken C#, C, and Java programming classes in college and understand some of the actionscript syntax. However, I am having trouble getting the correct code that will keep my same aspect ratio while adjusting to whatever browser size is open. For example, if I have a browser window set to 1440x900. My 766x780 flash website should adjust to 1440x1466 to fill the browser window. Can someone please help me with this. Some code would be nice and instructions on where to put this code specifically. I see in Flash CS4 there is a Actions window to place code in. But in order to make sure that the code is applied to the entire website is there a special place it needs to go. Below is a link to my website and what I have so far.
how to make you swf fill the whole browser window? something like this... [URL] I'm just wondering how to maximize the space in the browser... this may also be a stage size problem/solution?
View 6 RepliesI want a flv to fill the browser. I am using this code:
Code:
Select allStage.align = "TL";
Stage.scaleMode = "noScale";
Stage.showMenu = false;
var timeline:MovieClip = this;
var _minW:Number = 320;
var _minH:Number = 240;
[Code] .....
It works perfectly as written. It scale the movie on resize perfectly and retains the proportions of the video. It doesn't fill the browser completely though when the proportions arent correct(leaving bars or the background color on the sides or top and bottom). I want it to scale proportionately, but fill the browser, so effectively some of the movie will be cut off.
I have this script on the first frame of my movieclip:
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.addEventListener(Event.RESIZE, adjustLayout);
adjustLayout();[code]....
?
As you can see, it basically just controls the position of the elements of the site (logo and gallery), and makes the background (square) stretch to fill the browser window. what's the equivalent code in AS2?
i have a standalone exe flash file which opens autorun from a cd, and i need to open a windows browser directly from that flash. i want it to open the htm without any toolbars or scroll.
View 1 Repliesi have a standalone exe flash file which opens autorun from a cd, and i need to open a windows browser directly from that flash. i want it to open the htm without any toolbars or scroll...
View 1 Repliesgetting a PDF file to open in new browser window from Flash?For example:
Code:
getURL("test.pdf","_blank");
I have a client using IE7 on XP that says they see a brief popup that disappears before it is rendered. No error message is received.She is able to open a PDF from a plain html page
Code:
<a href="test.pdf" target="_blank">link</a>
Should I try converting getURL's to javascript calls?
I'm an actionscript beginner and am trying to create a flash file with a button that allows to user to swith from viewing my movie in their browser, to viewing it full screen.I've managed to source some code from the net, and although when I click my 'toggle button' the full screen works perfectly...when I click it again the flash file returns to the original browser window but I dont see my movie - just my back ground fill colour.The code I have is as follows (and is placed on frame 01 of my actions layer)
fullScreenButton.onPress=function()
{
if (Stage.displayState=="fullScreen")[code].....
I am pulling my hair out trying to make my simple flash file link to a URL and nothing I have tried will work. I am making a transparent box on the top layer of my file, making it a movie clip and adding the code
on (press){
getURL("http://www.trimergence.com/staging/news.html");
}
The action says it has no errors, but when I export the move, my cursor turns to a hand but goes no where when I click.
How do you load an external .swf into a movie clip and have the loaded .swf fill the shape of the "container" movie Clip?Is this possible(It would be resizing the external .swf)...
View 1 RepliesI'm trying to create a simple skin for the flex progressbar control. Both the track and the bar should have rounded corners, and the bar should fill the track completely in the parts where it is being shown.
Here is the bar skin I've created based off this example:
<?xml version="1.0" encoding="utf-8"?>
<s:SparkSkin
xmlns:fx="http://ns.adobe.com/mxml/2009"
[Code]....
Instead of the bar being flush with the track, there's a margin, and the rounded border gets cut off.
The title essentially is the question, how do I open the .swf without the browser's control bar junk? and maximize the window?
View 2 RepliesI'm trying to create a page where you click on the video thumbnail and the video opens up in its own window. I'd like the video to open at a specific size that I determine, not the browser, and I want it to be scalable. Here is what I have so far as a test file[URL]
View 2 RepliesI have a Flash/Flex object (Flashlight-VNC), which I would like to dynamically resize to fit the entire window after pressing a button in the Flex app. This would preferably happen without restarting the Flex app (and therefore the VNC session). I would just use the built-in Flash fullscreen mode, however Adobe's somewhat silly security restrictions prevent keyboard input while in fullscreen mode.
How exactly can I do this? I'm already using SWFObject to embed the SWF, if that helps. I am open to any solution utilizing ActionScript, JavaScript, or both, however I am not all too familiar with ActionScript or Flex, and the AS-based solutions I have found involve extending a "Sprite" object to add resize functionality, which Flashlight-VNC does not seem to use.
I have trailed through endless forums and tried adding all the various codes.I have a movie that is embedded within a php page. The movie starts with an animation and at the end, an image emerges with buttons. The image that emerges is actually an xml run slideshow but I don't want to complicate it with this bit of information if it is not relevant. So the film stops there and the buttons remain with a changing background.
I would like to make it skip to the end frame if it has been played before, if someone returns to the page, so that the user doesn't have to watch the entire movie to get to the buttons.I have tried adding this to the first scene however it is pretty temperamental:
var myCookie:SharedObject = SharedObject.getLocal("checkFirstVisit");
if (_root.getBytesLoaded() == _root.getBytesTotal()) {
// Flash Cookie[code].....
does when I publish in flash, but doesnt when I run the same swf in the browser. neither local server nor web server. firefox 3, os x, flash cs3, player 9is there anything I am missing?the window pops up when I use xxx.browse(),
View 3 RepliesI would like to force a pdf to be saved to disc rather than opening in a browser window? I am actually executing the command in flash in a button instance like this
on (release) {
getURL("http://website.com/pdfs/pdf_document.pdf", "_blank", "GET");
}
So how can I do this so it gives the pop up window of save to disc option?
This may be an ASP.NET issue too?
I've got a question about a swf that needs to be opaque. I've got a gradient fill in the .swf that creates a nice background. But I want to import this file in a flash/xml website and the file has to be opaque in order to work properly.
This is the code:
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.display.GradientType;
import flash.display.SpreadMethod;
import flash.display.InterpolationMethod;
import flash.geom.Matrix;
[Code] .....
I have been making a shooting game(birds-eye view), and have put 'Bots' into it but i seem to be have trouble making the bots spawn randomly over the entire map. (550w x 400h-the usual)I have tried using the Math.random function but it only picks between 0 and 1; is there a way to make Math.random choose between 0 - 550 (for the width of screen) ???Or would i have to make some function for that purpose?
View 8 Repliesive tried making a image fill preloader using masks etc. When publishing its just showing my preloader not continuing to my content.which is on frame 11. I was wondering if anyne can help me with code?
stop();
mask_mc.DisplayObject.height = 1;
this.addEventListener(Event.ENTER_FRAME, loading);[code]...
i have placed this on frame one where just preloader content is, then all content frames start at frame 11.
as you first get to this website, a neat little :10 swf plays. right now, i have a 'home' and a 'back' button on all the pages linked to a static screenprint of where my neat opening .swf ends.
is there a way to prevent that entire opening flash file from replaying again when visitors hit their own browser's 'back' button from the other pages, and just give them the last frame?
I am using the tutorial for the simple inventory system located here. I've got it working fine within my game I'm making. However, if the player uses an item in the middle (or, in fact, anywhere other than the end) of the inventory list, it leaves a gap where it once was. How would I go about making each of the found items in the inventory move back one slot upon the player using an item?
I've uploaded a sample of my current inventory system here. To understand what I mean, pick up all four items (in any order) and then "use" one of the first three items you picked up. You should see a gap has been left in the inventory. I want this gap to be filled in by the remaining items in the inventory once said item has been used.
I've been thinking about it and I think a method that may work would be to do a hit test for all of the slots every time an item is used (to check if any slots don't have any items overlapping them), and move all of the items that are positioned to the right of it left by 60 pixels (as each slot and item is 60x60). This could work in theory but I'm not sure if it's the best method, or how to actually do it. Does anyone know how I could achieve this? Or know of any better tutorials for inventory systems that include this feature already?
I am doing a site for my senior project in college and I was wondering what the best way to use a background image in flash is? I'd like the background image to fill the browser all the time, so resizing the browser will resize the background. Basically, is there a way to make the stage size the background? I'd like to be able to shift the background via AS tweening, but I want to make sure that what's on the stage is what's in the browser and can't see beyond that.
View 1 RepliesSo as to make things less confusing (I had a lot of different layers), I made each scene in my animation in its own file. Now I want to put them in the same file, so I thought I could make everything in one file into a movie clip and put it into another file that way.
However, it doesn't seem to work! I can highlight everything, convert it, and paste it into the other file... but when I paste it, it only pastes the first frame of my highlighted selection! How can I convert the whole thing into a movie clip instead of just one frame?
i have a flash site that links to PDF's with the navigateToURL function which works etc But now i would like Link to rather open up a download window instead of just a new browser window?
View 3 RepliesI have a standalone Flash projector running off CD. Currently, I use
getURL("http:url....);
to open the page on default browser. Only problem is the browser window is opening at the size it was last used. I like to see it opens full screen.