I have been trying to do something in Flash that I thought would be easy. I have created a movie clip with several frames and have tried to add a MouseOver MouseOut rollover to change from frame 1 to frame 2 whenever you roll over the movie clip. It doesn't work. It doesn't even seem to recognise any actionscript whatsoever within the flash file.If I change the movieclip to a button then suddenly everything does work as I want it to.
View 8 RepliesI want to reduce the alpha of a movie clip when mouse is rollOver the movie , the alpha will be continuously reducing over frames, i dont want to use tween.
[Code]...
i this code when i rollOver the mouse on a movie clip, it shows the alpha reducing over time , and at roll out alpha increases over time. but if i rollOver and rollOut in fractions of seconds , it flickers (like 60-100 instead of from the current alpha lvl), So i am looking for some code that can help me in fixing this problem.
i'm making a rollover menu with AS3, and when the user mouse clicks I want it to go to a certain frame in a movie clip and stop. It does this fine, however I have an animation for it to play on Mouse out. So when user mouse clicks then mouse outs from the button area it plays my mouse out animation and i'm back to square one. How can i tell it to ignore the mouse out animation if the user has clicked the button?
[Code]...
Im trying to create a button that on rollover runs a scale up movie clip...and then on click runs a separate movie clip...and on 2nd click navigates to another pageIve created a button with the rollover state, then tried adding movie clip to the down state but it overwrites the over state.Ive also tried creating a movie clip, with the rollover inside this movie and the 2nd movie inside this movie...i dont seem to be able to get the 2 inner objects to work together.
View 1 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
I am new to flash and peretty much lost when it comes to actionscripting. I am trying to use a movie clip as a rollover button. I have it working, but when the mouse goes over the rollover graphic, the graphic starts to flicker and I have no idea why. Can someone take a look at what I have and let me know what I did wrong. Here's the file I'm using: [URL]
View 1 RepliesI m a starter with Flash CS3 and i m trying to learn actionscript but So i ve made a movie clip (some animation stuff) and i have it in the first frame on stage, i want when the mouse rollover the movie clip to go and play in frame 166 but this dont happen...i have put this code in the movie clip
View 5 RepliesI am working on doing a clickable menu in flash cs4 and i have made my movie clips that animate each menu item on rollover (I did this by putting the movie clip into the "over" state inside the button which resides on my main scene)When I test it that all works fine each movie clip plays on rollover. But when I roll off the button it cuts the animation short.
What I want it to do is continue the movie clip after I take my mouse off the button and hold in that end frame until I have rolled over another button. But still I want it to play through the movie clip if I roll off one button and onto another. So if someone rolls over all the menu buttons they each play all the way through but will disappear after end frame and only the last button that i have rolled over will remain at last frame of its animation.
I have a map application that when I use the mouse wheel the map will scale up or scale down. The next thing I want to do is to focus on the mouse pointer while zooming on the part of the map.
I have this code...
function focusMousePosition(){ onMouseMove = function (){ Stage.width = _root._xmouse; Stage.height = _root._ymouse; updateAfterEvent(); }}
var mouseWheelListener = new Object();var wheelNum:Number;
mouseWheelListener.onMouseWheel = function(wheelNum){ focusMousePosition(); if (wheelNum > 0){ map._xscale *= 0.9; map._yscale *= 0.9; }else{ map._xscale *= 1.1; map._yscale *= 1.1; }}Mouse.addListener(mouseWheelListener);
Is it possible to use a movie clip to block the mouse from activating the stage MOUSE_OVER event?
View 4 RepliesSo I am working on doing a clickable menu in flash cs4 and i have made my movie clips that animate each menu item on rollover (I did this by putting the movie clip into the "over" state inside the button which resides on my main scene)
When I test it that all works fine each movie clip plays on rollover. But when I roll off the button it cuts the animation short.
What I want it to do is continue the movie clip after I take my mouse off the button and hold in that end frame until I have rolled over another button. But still I want it to play through the movie clip if I roll off one button and onto another. So if someone rolls over all the menu buttons they each play all the way through but will disappear after end frame and only the last button that i have rolled over will remain at last frame of its animation.
I would love to know how to make a movie clip rewind
//prev_mc.addEventListener(MouseEvent.ROLL_OVER, everyFrame);
//
//function everyFrame(event:Event):void
//{
// [code].........
heres my code basically i want it so if i stay rolloed over it keeps reversing, in stead of having to roll off and on, obviously only does one frame at a time.
I'm trying to set a special roll over effect for a movie clip i created. all i need to do is this: when i roll over, it should play from frame 2 and stop where i told him (at frame 5) when i roll out i want him to play from frame 6 and stop where i told him again. (at frame 10). i already did this with no problem except this: my movie clip has a very complex animation i created with other movie clips who works frame by frame style (actual animation). the problem is this: when i roll out after a short time (about half a second) the flash jumps to the rollout part of the movie clip and shows the rollout animation but doesn't finish the rollover animation, what makes the animation to jump (the animations i use is a bit long).
so i'm trying to see if anybody can explain to me how do i make this jump get out of my flash animation. what i mean is this : if i rollover the mouse and stays on the movie clip, the rollover animation is played and when i rollout out of the movie clip the animation continues as usual (this is something i already accomplished). but i want to make this a bit more complex : when i rollover and than right away roll out of the movie clip i want the flash to play the roll over animation and right after that the rollout animation without stopping .... ' i hope i made myself clear with this problem .... for some of you it may seem easy (using some action script tricks or something) but I'm only a beginner who's trying to figure it out ....
I'm not sure if this is being done through AS 2 or 3, or without code altogether. But, can anyone tell me how to create the rollover effect seen on this site (left hand side menu)?:[URL] I'm working in AS2, as I am not very familiar with AS3. I was thinking the effect might be created with a mask or some kind, but really not sure.
View 0 Repliesi'm trying to add a rollover sound to a movie clip. i've read a bunch of tutorials but I can't seem to get it working here is the code for the first frame of my movieclip:
stop();
this.onEnterFrame = function(){
if(rewind == true){[code]....
I am trying to load a movie clip in a RollOver action inside another movie clip, but I have 2 problems:
1. If I do it with loadMovie("movie.swf") I cannot go back to my previous instance when the movie stops playing, but if I do it with the loadMovieNum("movie.swf", 1), it gets back to the previous instance, but it leaves that instance behind, so it keeps appearing all the time on the back.
2. Even though I see the swf when I publish it from Flash, when I insert the swf in Dreamweaver, I cannot see the swf that I loaded in layer 1. I only see the first layer and nothing happens when I RollOver.
how to increase the alpha of a movie clip when you rollover a button.
View 1 RepliesSuppose I have three different movie clips. mc_A, mc_B, mc_C I want to have a rollover call a function that changes each movie clip. But I don't want to type it out like this:
Code:
mc_A.onRollOver = function() {
Explode.newExplosion(mc_A);
};
mc_B.onRollOver = function() {
[Code]...
Above you will see that I used this, it made sense to me, but this always refers to the main timeline (root in my case). So how do I pass the name of hte clip I am rolling over to a function?
Basically I have a flash swf file (main.fla/main.swf) with 4 different movie clips.I figured out how to make the movie clip stop on rollover but now I am stuck on trying to load some xml content in my flash swf file.I have loaded xml in flash before but for some reason I cannot figure this one out. I have included my flash source file for anyone that can help.You can download it here:
[url]
Also Included is a file called "main-1-visual.gif" in a the folder called "What it should look like". I numbered the xml variables that need to be loaded:
1. The logo at the top
2. The title
3. The subtitle
4. The content text
5. Another title
6. Related links (This needs to link to specific URL links)
What I am trying to accomplish is this:
When you rollover one of the molecules (balls) that specific movie clip pauses (This works fines right now). BUT I also need to have a xml file specific to that molecule (ball) to load on the right side (see image "main-1-visual.gif") in it's appropriate movie clip. I also need the loaded xml to stay active until you rollover a different molecule (ball).
I'm trying to highlight the current 'page' / movieclip by showing the onrollover state in navigation display/button.So the colour remains the onrollover state (in this case blue) while the particular movie clip/'page' is displaying. Changing when the user rolls over another button.I have two issues:1. I understand I have to place the button within a movieclip and have been experimenting with button '02' in the attached example.fla - however now I have done this the original action contained within the movieclip instance myScreen_mc is no longer working.
View 3 RepliesI'm looking to create a simple effect using AS2. I need to create a rollover effect on a movie clip that would in turn blur out of focus everything else behind it (Not selected).
Let me know if this does not make sense. I'm looking for guidance on how to achieve this effect optimally.
how i can i false a cursor while rollover a movie clip (not button, not handcursor).
Edit:
Mouse.hide();
hide cursor but i want to set a hide area with a movie clip. How can i do this ?
I have two movie clips physically overlapping, one nested inside the other:greengreen.bluean onRollOver function is included in each movie clip. I can get the onRollOver function to execute for the parent clip (green), but cannot get the function within the nested clip (blue) to work.
View 3 Repliesi have a problem with hitTest, i want when my mouse is on the leaf movie clip the movies clip disappear. or away any where
[Code]...
I have some buttons and over them a semi transparent panel appears. I want the panel to block press and rollover and other mouse events for all the movie clips that it covers. How to do that?
View 12 RepliesI have an mp3 player that sits off stage. There's a tab sticking out for it. When you moust over this tab (which is inside the mp3 player mc) I need the player mc to gotoAndPlay("over"); which is the player animating onto the stage. Then when you rollOut it will gotoAndPlay("out"); Which is the player animating back off stage. Now I can do all of this easy, but then none of the buttons inside the mp3 player mc don't work because flash thinks the whole movieclip is one big button.
View 1 Repliesi have a movie in which i have 50 thumbnails dynamically added to a mc and i have a scroller to scroll the mc which works fine.. on each thumb i have a rollover image (which is a bigger image of the thumb) which works fine but i want the rollover image to be shown within the area of mask area which is not happening now..
View 4 RepliesI'm using a function to make a movie clip with text inside of it act as a button:
Code:
poly.onPress = function() {
clearInterval(intervalID);
_parent.vocab.play();
};
is there a way to add a onRollOver: change tint of 'poly' to red (poly is a mc)??
This is a very simple thing I want to do: show informational popups when an area of the screen is rolled over. I was able to get this working in action script 3 with MouseEventListener and the visible =true/false property but can't seem to get it working correctly in AS2.
View 2 Repliesi have created a navigation bar for my website and i need to add a url to the movie clip, it has roll over and roll out but when i put the url on it cuts out the roll over and roll outs.. what do i do?
im using the coding...
on (rollOver) {_root.home.gotoAndPlay(2)
}
on (rollOut) {_root.home.gotoAndPlay(1)
}