I would love to know how to make a movie clip rewind
//prev_mc.addEventListener(MouseEvent.ROLL_OVER, everyFrame);
//
//function everyFrame(event:Event):void
//{
// [code].........
heres my code basically i want it so if i stay rolloed over it keeps reversing, in stead of having to roll off and on, obviously only does one frame at a time.
So i'm trying to rewind a movie clip using AS3. I've tried using an ENTER_FRAME event and, in the function, using gotoAndStop(mymovie.currentFrame - 1) to decrement the frame until it reaches #1, however it seems to play very slowly and choppy, not like when I just use play();
View 4 RepliesI made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
Here's what it looks like:I made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
I would like to use the rewind command inside a movie clip, with buttons or movie clips inside on the timeline with motion tween. this is reasonably straight forward.
But when i test the movie the buttons are not selectable as it is covered by the movieclip they are in.
How can i get these buttons to work within the movie clip. here is the code that goes on the first line of the actions layer. ( can be found in the kirupa tutorials).
[Code]...
This would look really good if i could make the buttons clickable/live and just linked to a url.
I would like to create an image sliding effect using next and previous buttons. For example the sliding images on the homepage here: http:[url]....I know this is not in flash, but that's the effect I'm trying to create using flash.
I followed the help quoted below. However, when I press the Previous button to rewind the timeline, the movie clip does not stop. For example, if I am on image 3 in the slider and press the previous button...instead of going to image 2, it slides all the way back to image 1 without stopping.
Quote:
ActionScript 2:Notice how, in the link to the example, all of the images/slides are the same size. Create a few of those before you begin.
1. Convert each image/slide to it's own Movie Clip, so that you can go always go back and adjust them if needed....as well as other useful reasons.
2. You only need 2 layers for now, Actions & Container. On frame1, add a stop action to the frame on your actions layer. Then, place all of your Movie Clips on the stage, on the Container layer. Line them up horizontally, edge-to-edge. Select them all and convert to a Movie Clip named "container".
3. On the Container layer, Insert A Keyframe > move the Container Movie Clip to the left so that the next slide is now in place on the stage > Right click in between the two Keyframes and choose "Create Motion Tween". You should have the animation from slide 1 to slide 2 now. Repeat this process for 2 -3, 3-4, 4-5 ......(don't worry about the reverse!)
4. We need to create buttons to go to the next and previous slide. Make a new layer called Buttons. Create 2 buttons, one for Next and one for Previous. These can be Movie Clips OR Buttons, just place them on the stage give one an instance name of "next_btn" & "prev_btn" (no quotes) for the other.
5. All that's left is to add some actions to a few frames on the Actions layer.
a) Add a stop action to every frame where the slide will be static (still), you should already have one on the first frame from step 2.
b) Now here's where the magic happens. If we test the movie now, the slides will just play and over. So add this code to the frame 1 on the Actions layer:
Code:
stop();//already have this stop action, just add the below
this.onEnterFrame = function(){[code]....
I am trying to rewind the time line inside a movie clip using the enclosed code - it works fine on Rollover but only for 2 frames on Rollout - what do I need to add to repeat the prevFrame function and go back to the beginning?
home_mc.buttonMode = true;
home_mc.addEventListener(MouseEvent.ROLL_OVER, buttonOver);
home_mc.addEventListener(MouseEvent.ROLL_OUT, buttonOut);
[code]...
I have a movie clip that runs in its own timeline. I want to stop the movie clip from playing whenever the mouse is clicked (in this application I am actually using a touch screen and I want the movie clip to stop playing whenever the screen is touched). In addition, I want the movie to rewind back to frame one so that none of the movie clip images are left on the screen.
View 3 RepliesIm trying to create a button that on rollover runs a scale up movie clip...and then on click runs a separate movie clip...and on 2nd click navigates to another pageIve created a button with the rollover state, then tried adding movie clip to the down state but it overwrites the over state.Ive also tried creating a movie clip, with the rollover inside this movie and the 2nd movie inside this movie...i dont seem to be able to get the 2 inner objects to work together.
View 1 RepliesI have been asked to use a lady who stays still but then when you rollover a button her arms moves to that button, I have looked everywhere for some answers but just can't find a single example of one.
Sounds so simple, but I have been trying to sort this for ages and just can't make it work properly
I want to reduce the alpha of a movie clip when mouse is rollOver the movie , the alpha will be continuously reducing over frames, i dont want to use tween.
[Code]...
i this code when i rollOver the mouse on a movie clip, it shows the alpha reducing over time , and at roll out alpha increases over time. but if i rollOver and rollOut in fractions of seconds , it flickers (like 60-100 instead of from the current alpha lvl), So i am looking for some code that can help me in fixing this problem.
below is some code i am using to rewind / play an animaion depending on the rollover state. only ting is i would like to have it so that i could do something like:
playFrames(homeBtn)...
this way i can use the same function over and over but i am not sure how to write this. i think its someting like function playFrames(obj); and then you do something with this...
[Code]...
i have some script that i am using to play an mc timeline on rollover and rewind the mc on rollout, but my problem is that i want to add an onRelease action that takes the mc to an specific frame within the mc. thing is that the onRollout action cancels out the onRelease action and rewinds the mc regardless. this is the script that i have on the first frame of the mc
[Code]...
I am new to flash and peretty much lost when it comes to actionscripting. I am trying to use a movie clip as a rollover button. I have it working, but when the mouse goes over the rollover graphic, the graphic starts to flicker and I have no idea why. Can someone take a look at what I have and let me know what I did wrong. Here's the file I'm using: [URL]
View 1 RepliesI m a starter with Flash CS3 and i m trying to learn actionscript but So i ve made a movie clip (some animation stuff) and i have it in the first frame on stage, i want when the mouse rollover the movie clip to go and play in frame 166 but this dont happen...i have put this code in the movie clip
View 5 RepliesI have been trying to do something in Flash that I thought would be easy. I have created a movie clip with several frames and have tried to add a MouseOver MouseOut rollover to change from frame 1 to frame 2 whenever you roll over the movie clip. It doesn't work. It doesn't even seem to recognise any actionscript whatsoever within the flash file.If I change the movieclip to a button then suddenly everything does work as I want it to.
View 8 RepliesI am working on doing a clickable menu in flash cs4 and i have made my movie clips that animate each menu item on rollover (I did this by putting the movie clip into the "over" state inside the button which resides on my main scene)When I test it that all works fine each movie clip plays on rollover. But when I roll off the button it cuts the animation short.
What I want it to do is continue the movie clip after I take my mouse off the button and hold in that end frame until I have rolled over another button. But still I want it to play through the movie clip if I roll off one button and onto another. So if someone rolls over all the menu buttons they each play all the way through but will disappear after end frame and only the last button that i have rolled over will remain at last frame of its animation.
So I am working on doing a clickable menu in flash cs4 and i have made my movie clips that animate each menu item on rollover (I did this by putting the movie clip into the "over" state inside the button which resides on my main scene)
When I test it that all works fine each movie clip plays on rollover. But when I roll off the button it cuts the animation short.
What I want it to do is continue the movie clip after I take my mouse off the button and hold in that end frame until I have rolled over another button. But still I want it to play through the movie clip if I roll off one button and onto another. So if someone rolls over all the menu buttons they each play all the way through but will disappear after end frame and only the last button that i have rolled over will remain at last frame of its animation.
I'm trying to set a special roll over effect for a movie clip i created. all i need to do is this: when i roll over, it should play from frame 2 and stop where i told him (at frame 5) when i roll out i want him to play from frame 6 and stop where i told him again. (at frame 10). i already did this with no problem except this: my movie clip has a very complex animation i created with other movie clips who works frame by frame style (actual animation). the problem is this: when i roll out after a short time (about half a second) the flash jumps to the rollout part of the movie clip and shows the rollout animation but doesn't finish the rollover animation, what makes the animation to jump (the animations i use is a bit long).
so i'm trying to see if anybody can explain to me how do i make this jump get out of my flash animation. what i mean is this : if i rollover the mouse and stays on the movie clip, the rollover animation is played and when i rollout out of the movie clip the animation continues as usual (this is something i already accomplished). but i want to make this a bit more complex : when i rollover and than right away roll out of the movie clip i want the flash to play the roll over animation and right after that the rollout animation without stopping .... ' i hope i made myself clear with this problem .... for some of you it may seem easy (using some action script tricks or something) but I'm only a beginner who's trying to figure it out ....
I'm not sure if this is being done through AS 2 or 3, or without code altogether. But, can anyone tell me how to create the rollover effect seen on this site (left hand side menu)?:[URL] I'm working in AS2, as I am not very familiar with AS3. I was thinking the effect might be created with a mask or some kind, but really not sure.
View 0 Repliesi'm trying to add a rollover sound to a movie clip. i've read a bunch of tutorials but I can't seem to get it working here is the code for the first frame of my movieclip:
stop();
this.onEnterFrame = function(){
if(rewind == true){[code]....
I am trying to load a movie clip in a RollOver action inside another movie clip, but I have 2 problems:
1. If I do it with loadMovie("movie.swf") I cannot go back to my previous instance when the movie stops playing, but if I do it with the loadMovieNum("movie.swf", 1), it gets back to the previous instance, but it leaves that instance behind, so it keeps appearing all the time on the back.
2. Even though I see the swf when I publish it from Flash, when I insert the swf in Dreamweaver, I cannot see the swf that I loaded in layer 1. I only see the first layer and nothing happens when I RollOver.
how to increase the alpha of a movie clip when you rollover a button.
View 1 RepliesSuppose I have three different movie clips. mc_A, mc_B, mc_C I want to have a rollover call a function that changes each movie clip. But I don't want to type it out like this:
Code:
mc_A.onRollOver = function() {
Explode.newExplosion(mc_A);
};
mc_B.onRollOver = function() {
[Code]...
Above you will see that I used this, it made sense to me, but this always refers to the main timeline (root in my case). So how do I pass the name of hte clip I am rolling over to a function?
Basically I have a flash swf file (main.fla/main.swf) with 4 different movie clips.I figured out how to make the movie clip stop on rollover but now I am stuck on trying to load some xml content in my flash swf file.I have loaded xml in flash before but for some reason I cannot figure this one out. I have included my flash source file for anyone that can help.You can download it here:
[url]
Also Included is a file called "main-1-visual.gif" in a the folder called "What it should look like". I numbered the xml variables that need to be loaded:
1. The logo at the top
2. The title
3. The subtitle
4. The content text
5. Another title
6. Related links (This needs to link to specific URL links)
What I am trying to accomplish is this:
When you rollover one of the molecules (balls) that specific movie clip pauses (This works fines right now). BUT I also need to have a xml file specific to that molecule (ball) to load on the right side (see image "main-1-visual.gif") in it's appropriate movie clip. I also need the loaded xml to stay active until you rollover a different molecule (ball).
I'm trying to highlight the current 'page' / movieclip by showing the onrollover state in navigation display/button.So the colour remains the onrollover state (in this case blue) while the particular movie clip/'page' is displaying. Changing when the user rolls over another button.I have two issues:1. I understand I have to place the button within a movieclip and have been experimenting with button '02' in the attached example.fla - however now I have done this the original action contained within the movieclip instance myScreen_mc is no longer working.
View 3 RepliesI'm looking to create a simple effect using AS2. I need to create a rollover effect on a movie clip that would in turn blur out of focus everything else behind it (Not selected).
Let me know if this does not make sense. I'm looking for guidance on how to achieve this effect optimally.
how i can i false a cursor while rollover a movie clip (not button, not handcursor).
Edit:
Mouse.hide();
hide cursor but i want to set a hide area with a movie clip. How can i do this ?
I have two movie clips physically overlapping, one nested inside the other:greengreen.bluean onRollOver function is included in each movie clip. I can get the onRollOver function to execute for the parent clip (green), but cannot get the function within the nested clip (blue) to work.
View 3 RepliesI have some buttons and over them a semi transparent panel appears. I want the panel to block press and rollover and other mouse events for all the movie clips that it covers. How to do that?
View 12 RepliesI have an mp3 player that sits off stage. There's a tab sticking out for it. When you moust over this tab (which is inside the mp3 player mc) I need the player mc to gotoAndPlay("over"); which is the player animating onto the stage. Then when you rollOut it will gotoAndPlay("out"); Which is the player animating back off stage. Now I can do all of this easy, but then none of the buttons inside the mp3 player mc don't work because flash thinks the whole movieclip is one big button.
View 1 Replies