So i'm trying to rewind a movie clip using AS3. I've tried using an ENTER_FRAME event and, in the function, using gotoAndStop(mymovie.currentFrame - 1) to decrement the frame until it reaches #1, however it seems to play very slowly and choppy, not like when I just use play();
View 4 RepliesI would love to know how to make a movie clip rewind
//prev_mc.addEventListener(MouseEvent.ROLL_OVER, everyFrame);
//
//function everyFrame(event:Event):void
//{
// [code].........
heres my code basically i want it so if i stay rolloed over it keeps reversing, in stead of having to roll off and on, obviously only does one frame at a time.
I made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
Here's what it looks like:I made a vertical list of thumbnails and converted them into a movie clip. There is a total of 20 thumbnails. I masked the movie clips so that it only shows 5 thumbnails at a time. I created keyframes at every point in the clip that 5 thumbnails are shown so that I can pause it.I was trying to use this code to scroll down from the first set of 5 to the second:
on (release) {
design_thumbnails.gotoAndPlay (20)
}
When I click the button nothing happens I'd also like to know how to rewind the movie so that when I press the up arrow it goes up to the previous set of 5.
I would like to use the rewind command inside a movie clip, with buttons or movie clips inside on the timeline with motion tween. this is reasonably straight forward.
But when i test the movie the buttons are not selectable as it is covered by the movieclip they are in.
How can i get these buttons to work within the movie clip. here is the code that goes on the first line of the actions layer. ( can be found in the kirupa tutorials).
[Code]...
This would look really good if i could make the buttons clickable/live and just linked to a url.
I would like to create an image sliding effect using next and previous buttons. For example the sliding images on the homepage here: http:[url]....I know this is not in flash, but that's the effect I'm trying to create using flash.
I followed the help quoted below. However, when I press the Previous button to rewind the timeline, the movie clip does not stop. For example, if I am on image 3 in the slider and press the previous button...instead of going to image 2, it slides all the way back to image 1 without stopping.
Quote:
ActionScript 2:Notice how, in the link to the example, all of the images/slides are the same size. Create a few of those before you begin.
1. Convert each image/slide to it's own Movie Clip, so that you can go always go back and adjust them if needed....as well as other useful reasons.
2. You only need 2 layers for now, Actions & Container. On frame1, add a stop action to the frame on your actions layer. Then, place all of your Movie Clips on the stage, on the Container layer. Line them up horizontally, edge-to-edge. Select them all and convert to a Movie Clip named "container".
3. On the Container layer, Insert A Keyframe > move the Container Movie Clip to the left so that the next slide is now in place on the stage > Right click in between the two Keyframes and choose "Create Motion Tween". You should have the animation from slide 1 to slide 2 now. Repeat this process for 2 -3, 3-4, 4-5 ......(don't worry about the reverse!)
4. We need to create buttons to go to the next and previous slide. Make a new layer called Buttons. Create 2 buttons, one for Next and one for Previous. These can be Movie Clips OR Buttons, just place them on the stage give one an instance name of "next_btn" & "prev_btn" (no quotes) for the other.
5. All that's left is to add some actions to a few frames on the Actions layer.
a) Add a stop action to every frame where the slide will be static (still), you should already have one on the first frame from step 2.
b) Now here's where the magic happens. If we test the movie now, the slides will just play and over. So add this code to the frame 1 on the Actions layer:
Code:
stop();//already have this stop action, just add the below
this.onEnterFrame = function(){[code]....
I am trying to rewind the time line inside a movie clip using the enclosed code - it works fine on Rollover but only for 2 frames on Rollout - what do I need to add to repeat the prevFrame function and go back to the beginning?
home_mc.buttonMode = true;
home_mc.addEventListener(MouseEvent.ROLL_OVER, buttonOver);
home_mc.addEventListener(MouseEvent.ROLL_OUT, buttonOut);
[code]...
I have a movie clip that runs in its own timeline. I want to stop the movie clip from playing whenever the mouse is clicked (in this application I am actually using a touch screen and I want the movie clip to stop playing whenever the screen is touched). In addition, I want the movie to rewind back to frame one so that none of the movie clip images are left on the screen.
View 3 RepliesI have exported my flash project into swf format
it is not playing smoothly
Even in the test movie also it is coming like that
I have increased the frame rate to 120fps even it is coming like that
I have a movieclip that is basically a scroll through of several pages. Every ten frames is another page. I have a next button and a previous button. The next button plays the movie for ten seconds and I would like for the previous button to rewind the clip for ten seconds.This is what I have right now:
previous_r1.addEventListener(MouseEvent.CLICK,prev iousr1);
function previousr1(event:MouseEvent):void {
movieclip1.addEventListener(Event.ENTER_FRAME,rewi nd);
[code].....
I need to know how to make two buttons: Back and Forward for move forward 24 frames or backwards 24 frames. Also I need to make a Rewind button, how I do that?
View 3 RepliesI have a button on my timeline when you mouse hover over the button there is an effect ( bg changes blah blah), on mouse over a 3d cube (exported from swift) will rotate which is in the above move clip, the action script is poiting to it via the label see below:
Code:
on (rollOver)
{
gotoAndPlay(2);
[Code].....
Problem is that my rewind and fast forward buttons do not work properly in the sense that they start to mess up when you fast forward or rewind past the current scene. It seems to just skip through the whole movie and totally mess up the animation.the code for the controls is on a single layer and reads as the following:
stop();
play_btn.onRelease = function (){
play();
[code].....
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
I'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
i am making a pacman game, and i need to know how to make it go to a certain scence when a movie clip collides with another movie clip.
View 2 RepliesThere is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 RepliesI created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 Repliesi am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[code]....
I've imported 9 .mov files in my flash presentation. Each lasts for about a minute, and the language is english. I have translation of each video clip in Serbian language as .txt files. And now i need that text to go below the movie clip simultaneosly with the voice in movie clip. And for example when i press pause,the text stops,and when i resume it,the text goes again.
View 1 Repliesit isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesI have in my root:
1 Movie Clip instancied as a "cursor" 1 Movie Clip instancied as a "Mc_Obstacles" with others 5 Movie Clipsand the 5 Movie Clips inside the "Mc_Obstacles" are instancied as "Obstacle" , all with the same instance...I want this: when the mc "cursor" hit one of mcs "obstacles" gotoandstop to frame X then i did in frame with actions in another layer:
cursor.onEnterFrame=function(){
this._x=this.x+10;
if(this.hitTest(Mc_Obstacles.Obstacle)){
gotoAndStop(4);
}
}
I really have two questions: How do I affect both a movie clip and its child movie clip in the same function? and how do I pull info from one component into a function for another? My basic setup is a movie clip of font choices, one on each frame: "bodyText_mc." Each of these frames has a child clip "bodyText_mc.bodyText" with alignment choices for the font. For instance, the user picks "Script" in the first ComboBox and then picks "Align Right" in the second. (All of this text is static because I need more design control that I can get with dynamic text.)
First of all, I have a combobox "cbBodyFont" that I use to go from frame to frame on movieclip "bodyText_mc." This works nicely:
[Code]...
CS3 Flash - Complete newbie to Flash and I'm trying to change an existing flash piece.It consists of 4 different text statements that appear on a Black background - the first appears and stays on-screen for 10 secs, then it starts to blur and fade away in about a sec, and then the next statement appears, etc, etc., and the whole lot loops.The 4 statements appear as Video Clips (Symbols?) in the library.I need to add a new statement, which means there will be 5 statements. I duplicated one of the library items and renamed it, which seems to have worked fine... but I cannot then work out how I insert that video clip into the Timeline and still have the same visual effects and timing as the existing ones? I can insert a blank frame, but then I can only drop the new video clip text onto that one frame.I've tried copying and pasting a whole set of frames, and then go in and change the text. Which I thought had worked, but then discovered that it also changed the original frames.... now understand that's because they are just instances and any change will affect the master Video Clip!
So can anyone advise if I can insert my newly added and renamed video clip into the timeframe and create the same effect as the others?Please keep any advice as idiot-proof as possible as this is my first venture into Flash... not finding it as intuitive as I hoped, spent 6hrs to date just trying trial and error without any real success.