I'm trying to display a shape using a mask in a way that it unhides the shape from left to center and in the same time from right to center.
--shape--
---><---
Is there a way to create a mask layer that animates two masks or to create two masks above one layer?
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 RepliesI was wondering whether it was possible to include multiple masks to just one layer?I have a huge deadline in for thurs and it would be a huuge help if it is possible.
View 1 RepliesREQS: - 3 layers of images (groups) with a parallaxe like effect, meaning: * through gaps in top layer you see the second and through that the third layer. * subsequent layers appear incrementally smaller. * top layer moves quickest, subsequent layers move incrementally slower * 'hazy' effect (gray semi transparant mask or blur) increases for 'farther' away layers.
- random keypress moves layers horizontally in one direction only. - space bar halts movement for all layers. - backspace and return keys zoom to next/prev layers.
- all keystrokes are visible in a textbox. Results are possibly used/stored. - pristine quality images - quick loading
I first started working out a prototype in Javascipt using JQuery and some available plugins after which I wrote some own code. This gets me in a good direction, but there's one MAJOR problem: file size. This, among other reasons, make me consider using Flash. I haven't used Flash in years and have just started diving into Actionscript 3, which is a beauty! Let me explain a bit more and tell me how feasible my idea is.
[Code]....
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesI am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 RepliesIm creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
I can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesI want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesI have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
I'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
Why this code doesn`t work?
tip_052.addEventListener(MouseEvent.MOUSE_OVER,ove rSub);function overSub(evtObj:MouseEvent) {
tip_052.visible = true;
else[code]....
appear this error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax error: else is unexpected.
this is the END of the code:
this.createEmptyMovieClip("pos", total);
pos.moveTo(radius.b, 0);
pos.beginGradientFill("radial", [0xCCCCCC, 0x999999], [100, 100], [0, 255], {matrixType:"box", x:-radius.b-radius.b/2, y:-radius.b-radius.b/2, w:radius.b*2, h:radius.b*2, r:0});
for (var radians = 0; radians
I get a error for the last line. The error is this:
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 11: ';' expected
for (var radians = 0; radians
I cant get it working.. I have flash mx 2004 pro..
Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 RepliesI can SEE the maskObject unless I set its alpha to 0 and then it doesn't let clicks through to objectToBeMasked
And every single tutorial that I've seen fails to mention this and how to solve it, as if it should be obvious.
How do I mask objects through AS3 so that the masks act like masks act like the ones added in the IDE?
So I have a MovieClip, A, and inside of it is a layer that has shapes on it for a mask, this layer does have some keyframe animation (the masks move). Then I have MovieClips on other layers that are masked by the masking layer. When the movie loads, I load in an external jpeg and draw it onto a bitmap object, and then use that bitmap object and attach it to the moviecilps that are masked. This works fine, until the animation hits the part where the masks actually animated, then it reverts back to whatever i had in it before i attached the bitmaps. Is this a bug? or am i missing something? the only way i can get it to work is to run a function every single frame that the mask changes to reattach the bitmap. but that seems quite unefficient to have to do
View 0 RepliesI have two seperate MCs which I want to have the same mask effect on it Ie a gap in the middle, the mask is spinning round as stated they are separate, the blue thing gets moved whist the white one doesn't
View 4 RepliesSo I have a MovieClip, A, and inside of it is a layer that has shapes on it for a mask, this layer does have some keyframe animation (the masks move). Then I have MovieClips on other layers that are masked by the masking layerWhen the movie loads, I load in an external jpeg and draw it onto a bitmap object, and then use that bitmap object and attach it to the moviecilps that are masked. This works fine, until the animation hits the part where the masks actually animated, then it reverts back to whatever i had in it before i attached the bitmaps. Is this a bug? or am i missing something? the only way i can get it to work is to run a function every single frame that the mask changes to reattach the bitmap. but that seems quite unefficient to have to do
View 2 RepliesI'm creating a starry sky for a header and there are mountains in the image which obviously I want the randomly generated stars to appear behind it.I've tried setMask() but I don't see it doing anything. The generated stars still appear on top of everything regardless of layer order and such.
View 2 RepliesI have a client who is IN LOVE with this site: http:[url]...I was just getting ready to start tweening and wondered if there's a way to script masks to do the same thing easily...NOT on mouse drag, but on the click of the button. I found a nice tutorial which will make a similar thing happen when you drag the mouse. But when I tried to target x and y the whole thing fell apart.
View 3 RepliesI have this problem that has been makin me crazy. I want to make an erasor for the drawing api basically. Since I wasn't able to accomplish it, i looked everywhere!!! no luck So far I have been able to "erase" with shapes. For instance, I can drag a circle out and see the masked item underneath. The very next shape I drag out cancels the mask from the previous shape as if you can only have 1 mask per maskee. Also, I cant get a line drawing to become a mask.
//creating the shape
_level3.drawingPlane.createEmptyMovieClip("layer"+ _level3.layer+"_"+i, _level3.layer);
// dynamically setting the mask_level3.water.setMask(_level3.drawingplane["layer"+_level3.layer+"_"+i]);
I've been having this issue for a day or two now and it's really bothering me. Sometimes the drawing api draws to the mask perfectly fine other times it doesn't work at all.
[Code]...
I'm trying to make flash add two maks in one movie clip,like this (pseudo-code)
PHP Code:
MovieClip.mask = mask1
MovieClip.mask = mask2
Print (MovieClip)
but it only shows me the last mask.
I'm trying to modify the alpha layer of a bitmapData by taking a source iamge and masking out areas that don't have the correct channel. ATM I'm using copyChannel to achieve the effect, but I'd liek more than 3 channels (use alpha kills the other channels it seems). 255, 0, 255 should be able to act as another mask.
This is what I'm doing now...
Code:
bitmap.bitmapData.copyChannel(tempMask, new Rectangle(0, 0, tempMask.width, tempMask.height), new Point(0, 0), BitmapDataChannel.RED, BitmapDataChannel.ALPHA);
So the red parts of the image mask out the source image. All I want is to be able to mask out things basic on multiple channels (the lesser of the 2).
1) How does copyChannel work? Can I just test each pixel manually and achieve relatively similar speeds? and 2) if the Flash inline functions are infact faster, is there a function that can do what I want, or would it be better to use a shader?
Code:
var tempBitmapData:BitmapData = new BitmapData(tempMask.width, tempMask.height);
var matrix:Array = [];
matrix = matrix.concat([0, 0, 0, 0, 0]); // red
matrix = matrix.concat([0, 0, 0, 0, 0]); // green
[Code].....
I have an animation I've created of a rotating Earth. I want to turn it into a movie clip, so I can easily use it in other files. The problem is, I can't make it into a movie clip because there are some layers that are masks and they are locked.
View 3 RepliesI'm trying to make flash add two maks in one movie clip,like this (pseudo-code)
PHP Code:
MovieClip.mask = mask1
MovieClip.mask = mask2
Print (MovieClip)
but it only shows me the last mask. I believe this is not possible?
i have a red rectangle. On top of this rectangle is a bitmapped (not vector unfortunately) pattern fill that needs to include some white/transparent pixels that should show the red color of the rectangle. How do you define this in SVG, if possible while avoiding the use of masks? The 'transparent' pixels keep coming up white instead of red.
View 1 RepliesWhen i create a new motion tween for example, i get the yellow "!" error in properties and it says "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol". Thing is, i dont have more than one symbol or thing more than one shape and that is actually being tweened.the ! error only shows when i select the last frame in the tween. any ideas how i can get around this? i've never had this problem previously.
when i create a motion tween, i draw the object (in this case a circle), right click on the single keyframe, select create motion tween, then copy this keyframe and paste it further down the timeline, say at frame 10. At frame 10, i will move the circle to another location. the tween seems to work and it has created the symbol in the libary (tween 1) as a graphic, and when i export, it works ok, but the last frame has still the same error with the "!". Same thing happens with shape tweens.
I'm having a hell of a time trying to get a custom mask to work on a project I'm creating.The mask I'm trying to use is applied as a pixel mask on a layer in the photoshop doc I'm working off, but I can't seem to figure out the proper way to get that layer mask imported into flash, to then compile into my .swc and be called from actionscript. (I'm coding in Flex)Whats the proper workflow for getting a pixel mask imported from photoshop so that when I call:
container.mask = myMask;
It'll show up as the shape I want, and not just a square box the size of my shape?
Does the MouseEvent work with masks ?
ActionScript Code:
myMask.addEventListener(MouseEvent.ROLL_OUT...)