Make Subtle Adjustments To Simlar Symbols On The Stage?
Aug 13, 2009
Let's say I create a symbol of a stick figure holding a shield.Symbol 1: The Stick manSymbol 2: The ShieldSymbol 3: the Stick man holding the shield.Now, how would it be possible to place several copies of Symbol 3 on the stage while making subtle adjustments to EACH symbol 3 on the stage.Let's say I want to make each stickman slightly a different color without every single stickman taking on the same color.How could I go about making this subtle of an adjustment without effecting every instance of symbol 1 and 2 on the stage. Is this possible in flash??? It seems that flash has so much power, but I have yet to figure out how to use it all, and I sure hope something like this is possible.
View 4 Replies
Similar Posts:
Dec 17, 2009
I'm not too sure what category this comes into, it may end up being an html/css issue not flash!I'm looking to create a flash website embedded into html. I want my flash stage height to adjust to the browser height but if the loaded flash content (images and text) height is greater then the current browser height i want the html scroll bars to appear. Each page in the website will have different heights
View 2 Replies
Mar 1, 2007
I'm trying to get this xml 'image_loader' (similar to kde wipes) rotation thing working for this page i'm working on. i have to make some adjustments with the path to the files according to how it is going to work on this site i'm working on. i'm not sure how or where to change the path in the actionscript to get to the path.
i've included a folder called '- example working without paths' which is to show how it is supposed to look. this works when everything is in one folder. but, when i setup the site structure the swf can't find the xml or the images to load...so i'm not really sure how to fix it. the 'root.hml' in the root folder represents the main html file that i'm using for the site.
View 1 Replies
Oct 29, 2008
I used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 Replies
Jul 11, 2009
I think I had this issue before I decided to try and learn mvc, which I'm doing right now. it's not a complex problem. But I can't figure it out. First, should I add swf address to my controller? that's what I think, considering it's between the view and the update. But mainly... I feel like it's just going to loop.. for instance. I add the .setValue method on a click handler. and it changes the url and everything.. grand. but during the change it fires off the change event of course.. now how can I make adjustments to my file based on the change event listener, if it's going to fire every time something in my movie sets the value?? as you can see i'm trying to use simplemvc's classes.. i'm just trying to learn though.
[Code]...
View 1 Replies
Dec 13, 2009
im not sure how to about this... i think it may have something to do with the addChild() function
View 3 Replies
Feb 9, 2010
I am using CS4. I have my Flash all setup and running perfect now w/ motion tweens etc.But I am trying to reposition some of my symbols on the stage (to get them into better alignment with other symbols), and every time I do this the move is recorded, and when I play back it shows the motion of my position change on my tween.Is there a way to simply move my symbols w/out losing their current tween, but not creating a new motion effect?
View 1 Replies
May 14, 2011
I've made a movie which has symbols waiting to come onto my stage. When I watch it, all seems to be fine until I run a test. A random symbol sits in the top left corner not moving which isn't there when I watch it.
I've looked through all the layers and none of them are duplicated. When i do a test, this following message appears:WARNING: Multiple 3D objects on the same frame have the same instance name. 3D instance names must be unique. All but one of the instances will be renamed during export.
View 1 Replies
Mar 31, 2011
I am doing a project that deals with pathfinding and other AI algorithms. I am creating a city for the AI to navigate through and I wanted to no if I add all the symbols to the stage before runtime and set it up is there a way I can access all of these symbols either in an array that the stage holds. I would like to have the AI avoid them and I just figured it would save me some time if I could do it this way instead of coding the placement of 50+ items.
View 1 Replies
Mar 6, 2011
I don't really know that much about Commands in Flash, but I was thinking this could be a possible Command to create.See, I have this puppet made up of dozens of separate pieces, all on their own layers.It's very tedious to click on 10 different symbols in order to move the character's arm, for example.I was wondering if there was a way to create a JSFL command to select each of the 10 symbols on the stage.
I tried clicking each one, and saving the "Change Selection" actions from the History Panel as a Command, but that is location-based.As soon as I move those symbols to a new location, the command I saved no longer selects them.And I can't select the objects by layer or frame, because it doesn't seem to want to save those either.
View 1 Replies
Jun 23, 2009
I am having some kind of issue with the display list? I have a function that goes through various frames of my timeline and then traces all the symbols on the stage..
ActionScript Code:
for (var pm = 0; pm < this.numChildren; pm++) {
var child = this.getChildAt(pm);
trace(child.name)
}
What I am noticing is that it will return everything until it runs into a symbol that does not exist on every frame.. as soon as it does encounter a symbol that does not exist on all frames of the main time line it spits out -
TypeError: Error #1009: Cannot access a property or method of a null object reference. at 3_Migration_Standard_Nav_v2_fla::MainTimeline/pMovie()
View 9 Replies
Mar 17, 2010
I'm trying to make a simple animation with Flash CS4 and Action Script 3.0 to make a number of Symbols fly by from right to left constantly.What I want is that once a symbol has reached the end of the screen it is destroyed and another one is placed at the start position.I intend to give each symbol a random speed and create a random symbol each time one is 'destroyed'.
View 4 Replies
Aug 28, 2010
I have been struggling with this with CS4 and CS5. I am working on an animation with a couple of characters comprised of several pngs I converted to symbols. When one characters symbols overlap another characters the swf file shows the stage color rather than the background image I have placed in the file. I can publish it as an html with the option of playing it windowless transparent and it will remove this problem. But I would like to just be able to play the swf file without this issue.
View 2 Replies
Oct 26, 2010
I'm working through a book called Foundation Game Design with Flash, and I'm finding the Flash IDE confusing. I've been programming for several years, so working with AS3 directly is far easier than trying to understand symbols and nested symbols and the difference between graphics and movie clips and scoping issues and all that -- when tied into the IDE.
How many of you who are making games in AS3 also use the Flash IDE? Can anyone recommend a resource that is AS3 heavy and Flash IDE light? I don't care how much time I may or may not save by using things like the timeline, I just want to understand what I'm using.
View 9 Replies
Mar 30, 2004
I have a few buttons and when I make them a symbol, they look like crap.
Anyone know a trick to make symbols look as good as the imported bitmap?
View 12 Replies
Mar 5, 2010
I have found a little FLA which demonstrates how the duplicate movie clip can be used.I tried to simplify and adjust the AS according to my needs. With some part i was successful but with some i wasn't.
i want to be able to set the beginning X position of the clips as "0" in X values. but when i assign "0" to the this._x , it naturally generates/duplicates all the clips at the same point. What I'm trying to achieve by doing this is, when the stage is scaled in means of width my clips should start to originate from the very left of the stage whatever the stage's width is.
my second question is how can i adjust the speed?When I stretch the stage width they(duplicated clips) all speed up in order to travel the whole stage in the same amount of time as they do with the initial/beginning stage width. I want the speed to stay constant whatever the distance is.
View 4 Replies
Feb 5, 2010
I'm attempting to use CS4 (PC/Vista, if that matters) to create a SWF file that will basically act as a "library" of commonly used symbols. This SWF would be loaded at runtime by other SWFs, which could then use the symbols within it, including all art and code assets.
[Code]...
View 4 Replies
Feb 8, 2010
I need a Bitmap to make a color map inside certain symbols. What I do is import the png file and export it to as3. After that I drag and drop it inside the Symbols that need it in the correct position. What I need to know is how to get a Bitmap child inside a symbol that belongs to a class if I can't set the instance name of that Bitmap. for ex: a Symbol of the class MyClass has an img exported as Class MyBitmapClass and Base Class flash.display.BitmapData. I want, through as3, to get this MyBitmapClass object.
View 1 Replies
Feb 13, 2012
Is there any way to do that, well bone tool is for AS3 only.. so how would you connect symbols with other symbols?
View 5 Replies
Jan 30, 2009
I got a music player template online and I am having trouble customizing some of the features.
1. It has a play/pause toggle button, and I have them separated, and included a stop button.
2. I wanted the volume to go up and down, instead of left and right
3. And I would like my picture to change when I hit next
[Code]...
View 0 Replies
Jun 9, 2006
How to do level adjustments (like Photoshop levels) on a bitmapData Object using the paletteMap method. I am fine with syntax and all that, just don't understand how the channel array values are used well enough to come up with them for myself. I have read to use a palette of 0 and 1, but I am not sure what that means. The goal of this is to take a grayscale image and get sharper black and white values for it. Also, I hope to understand how to use this method better in general.
View 1 Replies
Mar 12, 2006
So I wanted to implement this effect: [URL] but I only want the first image to appear, so pretty much without it being blurred. I also wanted it to stay a while and then dissolve. How do you do that and how do you control the speed of the animation? Once I turn up the ra, ba ... values it does slow down but restarts halfway through the animation. I also need it to stop once it ran the cycle. It should go from invisible, to visible, then stay and then dissolve.
View 4 Replies
Jul 11, 2011
How do you make a movieclip move horizontally from the start of the stage to 3/4 of the stage. Stage size is 700 px by 600 px i want just one row in the middle of the stage. i want that movieclip to disappear right after it reach the end of the 3/4 mark.
View 1 Replies
Jan 8, 2009
[URL] how to make a date countdown. I now want to take it a bit further. On my site I have three gears that just continuously turn; now what I want to do is that over a period of time, these symbols change. Like say every 2 hours the symbols change to a different colour or something, and at pacific dates more gears will appear.
View 1 Replies
Sep 21, 2010
Right now my stage dimensions are 980 X 800 px. I need to cut or "crop out" the bottom portion of the footer because its height is too long. So I changed the stage dimensions to 980 X 600 px (and changed the corresponding dimensions in the embed tag in the index.html file to match). Doing this seems to cut out the bottom but at the same time adds space to the top and seems to distort the overall spacing. Is there a simple way to crop out the bottom of the stage (just like cropping out a section of a photo)?
View 5 Replies
Aug 6, 2009
have a list of info; each topic needs to clear the last bit and put a new bit of info corresponding to that topic on the stage. I'm working with Flash CS4 and AS 3.0 on a Mac and I don't want just code snippets like other message boards.
View 3 Replies
Dec 16, 2010
Im am trying to make boundaries on my stage for my MC box1_mc, there are no errors but it doesnt seem to work.. Here is the code..
function limitStageBorder(box1_mc) {
var box1_x:Number = stage.stageWidth - box1_mc.width;
var box1_y:Number = stage.stageHeight - box1_mc.height;[code]......
View 7 Replies
Feb 27, 2010
Ive got my dancing fruit sorted, however when I save the file as an animated gif and put it in my application the gif has the stage background. If it wasnt animated I could edit the back ground in photo shop, but I dont seem to be able to with the animated file. Is there anyway I can just have my dancing fruit with out the stage?
View 3 Replies
Oct 9, 2007
how to make an invisible rectangle on stage that could be clicked for example
View 0 Replies
Jun 17, 2009
I'm using flash 8/actionscript 2, I'm trying to load or make an existing movie clip appear on the stage.
Here's my script:
var shopBT:movieClip;
shop_btn.onRollOver = function(){
shopSUB.attachMovie("shopSUB", "shopSUB", getNextHighestDepth());
shopSUB._x = shop_btn._x + 5;
shopSUB._y = shop_btn._y;
}
View 9 Replies
