Can you access the FMS Start Screen to verify installation remotely? We have a new FMS 3.5.4 installation set up by our IS team, but cannot remote directly into the box to verify the installation per the installation guide. Is there a URL that can be used to access the FMS Start Screen if FMS was installed with Apache?
View 1 RepliesI've freshly installed the FSM demo on a redhat linux box, and have everything working. From that start screen running on Local Host, I click the "Play video (HTTP)" and that video of a train shows up. Cool. But when I click the link above it ("Play Video (RTMP)") I get an error message: "Connection Error. press Play to try again." and no matter how many times I hit play, I get that same message. The Dynamic stream doesn't work either, and the Interactive sucessfully displays webcam feeds, but doesn't show the "Play Live Stream" button thing. Is there anything special you have to do to get the RTMP stuff working? Some special command or server you have to run?
Would firewalls intefere with things (I'm pretty sure there isn't one on the machine, but I'm flailing wildly here) or would permissions mess things up? I'm completely lost ^_^;; I guess I should also add that there doesn't seem to be any log files. I'm looking under the server install directory, and there isn't even a "log" folder. There isn't one under Apache, either. It confuses me. So far all I can find on the internet is instructions to look at the log files...but if they aren't there... Am I just looking in the wrong places, or are they just not being generated yet? I did a tcpdump with wireshark, and the web app IS pinging port 1935 (for RTMP), but the packets are failling the checksum and are refusing to be reassembled because of that. Is this making sense to ANYBODY?
We installed FMS on a new server - a cloud environment - and set the fms.ini for the correct dedicated IP but we're unable to see the start screen or access any videos.where the IP would need to be added to point to the wwwroot directory?
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
I am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
We are working with FMS 4 server for a while for a 2 directions video application, and it works great with rtmp. We now want to use its rtmfp abilities after we used Cirrus for testing in the last few days and it also worked well. Locally - everything is working fine, but when we try the application on the remote server - we have some problems.
[Code]....
Again, it is working beautifully both locally and with Cirrus. RTMP also works well with the remote server.
I have tested other embedded videos and they will play remotely so I know the hosting site is working.Currently,the live video will play locally and remotely from this computer where all the files are stored but only the skin is visible on any other remote computer's web browser.
View 2 RepliesI am trying to set up DVR streaming using FLME. I'm following this tutorial: http:[url]........I'm up to Step 2,
I put in the following information into the FLME:
FMS URL: rtmp://222.222.222.222/dvrcast_origin
Stream: mp4:sample.f4v
Then click 'Connect' , but I get an error "Failure to connect to primary server verify that your server URL and application name are valid and that your internet connection is working and retry". My server is a 32-bit windows 2007 VPS , with FMS running.I don't know if I set up the DVR Cast application correct. All I did was copy the dvrcast_origin into the installationdirectory/applications, then I started a new instance of dvrcast_origin with _definst_...Also, I am running the trial version of FMS, and DVR needs FMIS. Is there a way I can just run FMIS?
I have inherited a custom application on Flash Media Interactive Server 3.0 that broadcasts audio in real time. The custom app is written using Adobe Flash Professional 8 and actionscript 2.0.
A little background of how the custom app works When a user connects to the media server to join a stream, our custom application calls out to a seperate application server (that is not Flash) to determine if the user is allowed to connect to a broadcast stream and which stream they should join. We use Xml.sendAndLoad() to do this. The application server we call sends back Xml to the custom App on the Flash Media Server.
[Code]...
I try to establich the connection with asc file from applications/videochat $connection_string="rtmp://videochat/"; And I'm getting the result from media server
Connecting to the video server...>>The client does not have permission to connect to the application, or the application expected different parameters from those that were passed.>>The connection was closed successfully
I'm trying to connect to an FMS server with a Flex application. I can throw the rtmp URL straight in as the source for a VideoPlayer and it will work, but can't figure out how to get it to work with a NetStream. The pure Flash Video element works as in the FMS Flash demos, but is extremely laggy and lacks all the nice functionality of the built VideoPlayer. Is there any documentation on working with FMS with Flex? We're at a point where we need to decide quickly if FMS will do what we need to do or if we should purse other technologies.
View 4 RepliesI'm trying to stream my webcam to my FMS Server, using AS3, but I get this error message:
[Code]...
i am working on creating a custom application for FMS 3.0 that calls a webservice to validate the user coming in. I have tested the following sample code from the Server-Side ActionScript Language Ref. (See below) The URL has been changed to protect the innocent.
This codes seems to work fine when going to an unsecured site but the innvocation of the service never seems to go out when attempting it over SSL. The Server documentation says that outgoing calls like this should work over SSL. Is this true? If so what do I need to do to get it to work?
[Code]...
I've been using FMS for a few weeks, and feel relatively comfortable with it, but am currently having some trouble connecting to a live stream in a a video conferencing-type application. I suspect I'm leaving some small step out, but am having trouble seeing what that step is.
I have one client application open the video camera, connect to the FMS, and publish it's live camera stream to the server. Something like this:
Connect to the FMS
nc.connect("rtmp://<ip addr>9/chat_test/");
In my connection (success) handler:
cam = Camera.getCamera();
cam.addEventListener(StatusEvent.STATUS, statusHandler);
...
[code]...
However, I keep getting "NetStream.Play.StreamNotFound" errors. This seems relatively straightforward, but I'm clearly missing a small step somewhere.
I installed FMS 4 on my notebook and I was able to access the console without trouble. I used localhost for the server address. When I installed it on a remote server (Windows 2008), I can't get in. I tried the same thing. I opened it from the file system [URL] and I tried localhost but it didn't work. I've tried other values
[URL]
One problem could be that I installed Apache but there is already a IIS server using the port 80. When I look in the service panel, FMSApache says it is starting but not started.
Suddenly mic not connecting to server. I have FP 10.1. 102.64 Windows XP 32 bit and explorer 8. See link which instructs me to "change" but no response.
View 4 RepliesI was wondering what the difference is between connecting to 1935 and 80. Does one port have an advantage over the other? I know by default 1935 is blocked and it appears to be the perferred port to use, but does port 80 HTTP slow down the stream?
View 1 RepliesWe have installed Flash Media Server on a Linux machine.It has 2GB of RAM,Fedora 9 with kernel 2.6.27.5-41.fc9.i686, the install required a few packages (compat-expat1 was one) to be installed before we saw the sample page. The sample page takes a few minutes to load and opening the page to connect to the admin console is about the same.
This is currently on our internal network while we try and see how it works. Are there any specifc TCP related kernel tuning parameters (eg in sysctl.conf) which need to be put in place over and above the out-of-box configuration. Any troubleshooting hints which might identify the problem. The install seemed ok nothing in /var/log/messages and checking to see what is running (ps aux | grep fms) I see
./fmsmaster -silent/opt/adobe/fms/Apache2.2/bin/httpd -f ./conf/httpd.conf -d /opt/adobe/fms/Apache2.2 -k start/opt/adobe/fms/fmsedge -edgeports :80,1935 -coreports localhost:19350 -conf /opt/adobe/fms/conf/Server.xml -adaptor _defaultRoot_ -name[code]....
but when we clear our browser cache and go to a page it is taking forever.It is taking about 5 minutes to open up the initial page, but when it is open the videos all seem to come through fine.The server previously had apache on it but I removed that copy and went with the version included with FMS.
For some reason connecting to Flash Media Server 3.5 takes around 40 seconds. The server is running on Windows Server 2008 (64-bit edition) on a virtual server located in a reliable hosting center and I'm connecting to it over the internet. The server is using built-in Windows Firewall with all the inbound TCP ports required by Flash Media Server opened (80, 1935 and 1111).
If I disable the server's firewall the connection time drops to 20 seconds, but it's still pretty damn long time just for establishing connection. We probably have some company firewall at this end (the client side), but other streaming media services works just fine over this connection.
I have access to a flash media server on a CDN.I want to allow people to easily connect to this server. Currenty, they need to an additional software to connect to the FMS.It would be nicer if they could just connect to the server with their browser.So I assume I need to create a SWF file and connect from this file to the FMS (with Actionscript).The end result would look like the demo of the jquery webcam plugin, only that the SWF file would establish a connection to the FMS and stream the video to the FMS
View 1 RepliesI'm running FMS 3.5 on RedHat, and have some server side actionscript that is attempting to perform an HTTP GET on a remote URL, e.g:
loadVars.send("http://someurl/");
This works on a Windows XP development server, but not on the RedHat deployment server. Are there any configuration options that I need to be aware of in order to allow my application to perform requests such as these (i.e. HTTP requests to remote servers)?
I am trying to connect to an FMS application without flash (no SWF). To the best of my knowledge,the only way to accomplish this is thru the admin APIs, is that correct? If so, how do I return meaningful values from the admin API? I can call functions and stuff using the broadcastMsg API call but I can't seem to get back any values. All that is returned is a useless "Success" type message. I have tried using shared objects and the getSharedObjects API call, but the call doesn't return any info on the contents of the shared objects, just their names and some info on their persistance.
Is there another way of accomplishing my goal outside of the Admin API? If not how do I return meaningful variables from the Admin API? Is there a way to hack or extend the admin API?
The problem is a weird problem, because I can connect to the application through an RTMP test site, Adobe Flash Server reconginzes the connection and allows it. But when I try to connect from the flash applet (It's called Videowhisper), the connection doesn't go through. I was wondering if anyone knew what the problem is? I host Joomla (open source networking site) on a WAMP server, and Adobe Flash Server on the same machine. Adobe Flash Server is acception connections, just not from Joomla, for some reason.
View 2 RepliesI am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out".
View 1 RepliesI recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
View 2 RepliesSo I have a FMS 3.5, which I want to do live streams. The thing is I want several different people to be able to do the live broadcast, and I would like the server locked down at least a little and not allow anyone that wants to, to start a broadcast. With that said, I have FMS 3.5 installed, and I installed the Authentificaiton Add-In (3.0). I added a user to the authentification add-in, but it's still doesn't require a username / password, doesn't even prompt me.
View 4 RepliesI am using remote Win Server 2003 R2 via rdesktop. As an "administrator", I installed FMS 3.5 - Developer version using default options. Media Server starts, runs, and appears to work. Admin Server is not running. When I attempt to start it (from Win admin services tools), I get error 1067 (Error registering class: name mismatch (%1$S, %2$S)). Everything done remotely as an administrator.
View 4 RepliesWhen user first time log into site camera start the capturing and stream is saved in application folder with the streamname(straemname.flv). then user logout and then logged in then i have to append that stream in same straemname.flv filey this code i have done that task
camera = Camera.getCamera();
camera.setQuality(0,80); camera.setMode(videoWidth,videoheight,15,true);camera.setLoopback(false);
[code].....
FMS does not start in win 7.There were some starts but only when first run after the installation. (i checked it 3 times) After the computer reboot, FMS does not start. Whats the problemm ?
View 1 RepliesThis is pretty straight in windows. But how to do the 2 steps in linux?
View 5 Replies