Media Server :: DvrCast Application Seek Bar Max Time Updation ?
Jun 22, 2011
I have used the Dvrcast application with FLVPlayback 2.5.0.26 for playing the dvr video.I have successfully achieved the dvr functionality with that application but i don't know how to update the seekbar max time (ex: while I play the video it the video length say for example 3min after i play the video it is keep on increasing the length since its dvr publishing will continue in other hand).It shows the max time of video when I enter to play the video not the current length of the video. I need the help to achieve this function.
View 12 Replies
Similar Posts:
May 30, 2011
Currently i am working with the dvr functionality here i need to set the seek bar for the video. This could be used to seek the video to the particular position. I don't know how to set the maximum time on the seek bar dynamically (Since its DVR maximum time will be increase if publishing video is continues) .I think through the metadata we can get the total time of video Tell me how to call the metadata externally .
View 5 Replies
Sep 18, 2011
As far as I know that the DVR function can be triggered by either check mark the "DVR auto Record" at the FMLE or by using the DVRControllerSynch. but I have a hardware device (not a computer software) that stream the video to the server How can I force DVRcast to run the DVR feature all the time?
View 4 Replies
Jun 29, 2011
I've looked through the scripts in the scripts/ directory, but haven't seen anything obvious.
I would like to be able to specify the file name to capture the stream to. At present, the capture file is always named the same as the stream, which means if I stream for a bit, stop, then restart, the originally captured file gets overwritten. I'd like to be able to incorporate something, i.e. the stream start time, into the capture file name.
View 3 Replies
Feb 3, 2011
Is DVRCast appliction working on Flash Media Development Server?I am using Flash Media Development Server 4, Flash Media Live Encoder 3.2, and URL..I've installed DVRCast tool on the server, I am also streaming with the checkbox DVR Auto Record turn on, on my streaming computer.However when I configure the player from OSMF, I can only see a LIVE stream, but the DVR functionality is not working. Once I turn the DVR stream checkbox on ADVANCED on OSMF, it cannot find the stream.
View 4 Replies
Jun 22, 2011
I am trying to set up DVR streaming using FLME. I'm following this tutorial: http:[url]........I'm up to Step 2,
I put in the following information into the FLME:
FMS URL: rtmp://222.222.222.222/dvrcast_origin
Stream: mp4:sample.f4v
Then click 'Connect' , but I get an error "Failure to connect to primary server verify that your server URL and application name are valid and that your internet connection is working and retry". My server is a 32-bit windows 2007 VPS , with FMS running.I don't know if I set up the DVR Cast application correct. All I did was copy the dvrcast_origin into the installationdirectory/applications, then I started a new instance of dvrcast_origin with _definst_...Also, I am running the trial version of FMS, and DVR needs FMIS. Is there a way I can just run FMIS?
View 16 Replies
Mar 14, 2011
I am trying to build a DVR Cast app using DVRCast 1.2 provided by Adobe. The problem I am facing right now is that I am finding difficult to record multiple streams at the same time so that I can make dynamic stream to work correctly. Even though Adobe has provided DVRControllerSynch, it does not mention anything how the streams are recorded.
View 4 Replies
Dec 9, 2010
I've build a live video/audio chat application. All works fine only the issue is latency of 5 secs. I'm using FMS 3.5 and FLEX.
View 1 Replies
Mar 3, 2011
I'm looking to use the Smart Seek options with netStream in an upcoming project. Currently, we are using Flash CS4 and it seems this API is not available. Am I correct on this? Is this only available in CS5 as far as Flash Professional goes? What about Flex? Which version of Flex is required to access the smart seek API? Or am I misunderstanding this, and the Smart Seek API is server side only AS?
View 2 Replies
Dec 12, 2010
I try to start a FLV (created with soundbooth cs5) at a certain point of time using ns.play('video', 33000) or even just ns.seek(33000);
The FLV is about 9 hours long.
How do I make this work ? And why is it not working?
View 7 Replies
Mar 22, 2010
I have a big problem with my FMS application : randomely my fms application become a zombie app. After a random time ... the application become a zombie : it doesn't respond. In the admin console, it appear like an other application but the number of connected client grow up indifinitely (client are never disconnected ... ) and log are not writen in application.00.log !
View 21 Replies
Jun 18, 2010
I am using OSMF v1.0 along with FMS 3.5.3 and flash player 10.1. Whenever i do a seek, lets say to a time 't'. Netstream.time gives me an incorrect result which is more than 1.5*t (varies). So if i seek to 100, i get netstream.time as approx. 160. I also noticed, 'NetStream.info.VideoBufferLength' goes very high (from around 3-4 to 50-60) just before the Netstream.time parameter gets updated and drops backs after update.
View 1 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Oct 29, 2009
We have an application that works no problems on our server with FMS in test mode. As soon as we enter our FMS license key we get this error: "application is not a valid signed application loading access denied".We removed the license key and it works again, but with user limits obviously, so this is not an acceptable fix.
View 5 Replies
Oct 5, 2010
Is there any application which can relay another application on Flash Media server? For exmaple I have a "live" application on the server. I want another application, "liverelay" which can basically relay what is coming on the "live" application. Is it possible? If so how can I implement it? Looking forward to a response.
View 12 Replies
Aug 20, 2010
Is the Flash Video (or Flex VideoDisplay) component capable of seeking to an exact moment in a video?It seems to always 'snap' to keyframes (which is understandable). I'm just wondering if there are any mechanisms in the video classes for seeking to exact frames, ie it should do the translation from keyframe to specific frame in the background rather than having to actually play the video forward to the desired frame.This is not a streaming file and has nothing to do with buffering. The player is just downloading a movie file from the web and playing it from memory.
View 1 Replies
Aug 24, 2009
I'm testing Live streaming with FMSS. The stream is pushed to FMSS buy Adobe FMLE software. Streaming works fine until I reach 1300-1400 simultaneous connections.No matter what the encoding ratebit is (150kbps or 2000kbps) the stream is no longer play from time to time (5-8 seconds).
The CPU (2xIntel Quad) is loaded less than 20% and memory used is about 2 GB (there is plenty of memory installed 32G). The OS is RedHat 5.3 64bit platform. Network uplink maximum rate is 4Gbps.I disabled the Queue but the problem still persist.
View 1 Replies
Mar 5, 2012
Dear community, i am searching for 6 days for a solution but i couldnt find. I installed the trial version of Adobe Media Server 4.5. I am trying to host live stream and it is working without error. but when i activate protection (PHDS), server gives en error code: 20...
Here is the server log...
After i could take the Live HDS, i made these settings as described at [url]
My application.xml and event.xml files are:
View 1 Replies
Aug 12, 2011
I have configured FMS on Amazon EC2 I am trying to capture data from my webcam and push it to the server.For storing the webcam i created a new folder but as it is recommended in other forums "You need to replace the signed Live application (main.far) with main.asc in[FMS-Install-Dir]/samples/applications/live/ ;(For more Info: refer to documentations & live/readme.txt) "I am not able to locate samples folder from where i can get my main.asc file
View 4 Replies
Apr 4, 2011
The server on which FMS was running crashed due to a power failure. FMS is set to start, and it restarted with the server.Unfortunately it restarted with no applications loaded, including the application, which we need to run continuously.Is there some way to ensure that the server always starts with a particular application loaded? The only way I could find to load it was through the systems console.
View 1 Replies
Feb 22, 2011
[URL]i have my client app in my local system.. i m using rtmp://my server/Helloworld to connect server.. but while running my client app nothing happed.how to launch and run app in fms server?
View 3 Replies
Aug 26, 2009
I am trying to make video two way chat application through FMS streaming in AS3.0.Its working fine with Mozilla but not working in Internet Explorer.
View 3 Replies
Oct 26, 2009
I have created a folder inside Flash Streaming Server/conf/_defaultRoot_/ called Test with some FLV in the folder. When I log into the console its shows the server and _defaultHost_ and Test but says You are not logged into:Test; make a seperate connection. Does this mean it wants a new application created for Test? How do I fix this?
View 5 Replies
Apr 20, 2010
The server hosting our FMS does not have space to adequately store the media files over time. I have since connected a 500GB external drive to the server. This drive is mapped as the Z drive. I am not exactly sure how I need to edit my application.xml for all http requests to point to this external drive. Below is a small sample of the file. How would I correctly edit this file? Would I just add a line that says <Streams>/;${Z:VOD_DIR}</Streams> ? Do I need to delete either of the below lines?
- <Application>- <StreamManager>- <VirtualDirectory>- <!-- Specifies application specific virtual directory mapping for recorded streams. --> <Streams>/;${VOD_COMMON_DIR}</Streams> <Streams>/;${VOD_DIR}</Streams> </VirtualDirectory> </StreamManager>
[code].....
View 21 Replies
Jun 27, 2010
I am trying to playback recorded streams from a Flash Media Interactive Server using the VideoPlayer component in Flex 4/Flash Builder 4.If the stream is located in the serverpath>/ streams/vod/_definst_ directory then I can get to it by setting the 'source' parameter of the VideoPlayer to [code]What I can't get to work is when I have a stream recorded to an instance within an application directory.So if the application is "app1' and the instance name is "inst1" it would be literally located in <serverpath>/ app1/ streams/ inst1 directory. Setting the source parameter to this "<server>/ app1/ inst1/ streamname" does not work.It seams to be ignoring the 'inst1' part of the path because the server side log shows '_definst_' as the instance name being run.I know this is in part a Flex 4 question, but manually writing a video player works. I would just like to get the Flex 4 VideoPlayer component to play the video.
View 2 Replies
Nov 15, 2010
I have an FMS Clustered in Edge-Origin configuration. Can I have different Origins for different applications but the same edges?.I have multiple edges forwarding the requests to the Origins based on the application name?[code]And if its possible, can someone advice the advantageous of having different Origins for different Applications?
View 6 Replies
Jan 26, 2011
When a client connects to an application (nc.connect) this is catched at server side using application.onConnect; so, when the client asks for a stream (ns.play) ... does this have some correspondence at server side ? Can we catch this event in some way?Or, seen from another point of view: is there any way, from within an application, to know what stream(s) the application is serving ? I mean, if we want the list of connected clients we have the application.clients array; is there any correspondence from streams ?
View 2 Replies
Feb 3, 2011
I'm trying to record a video to the default FMS vod application with a flash movie, i'm getting this error: "NetStream.Record.NoAccess". I think the problem is not in my code, but just to make it sure, here is it:
var mycam:Camera = Camera.getCamera();
mycam.setMode(320,240,25);
var myvid:Video = new Video(mycam.width,mycam.height);
[code]...
i checked and the connection to the server is fine.if i use live streaming, than it's fine (of course in this case i use the live application).It's maybe a file system related problem. I use windows 7, and given all permissions for all the users.. still dont working.
View 4 Replies
Jun 4, 2007
we are hopping to develop a text chat by flash sites.
View 3 Replies
Apr 19, 2011
I am following this: [URL]. And parsing the logs to get the stats of applications is hard if theres heavy traffic its hard to get everything to parse right. Would it be easier to import all the stats into mysql db once an hour that way its easier to work with?
View 1 Replies
