I have been using streaming Flash video but just found out that it can't be seen in many places because Flash streams over ports 1935, 443, and 80, which are often closed by firewall. Progressive only needs port 443 so it's more likely that it will come through firewall.
View 4 RepliesWill the use of HTTP Dynamic Streaming in place of the RTMP protocol aleviate the connectivity problems experienced by users who are sitting behind restrictive corporate firewalls?
View 2 RepliesI have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
We are streaming a one hour F4V from streaming media server 3.5.2 and for some reason it is seeing our one hour video as being 10 hours long. We have tons of other videos and never ran into this problem in any of the other files. This is the only file that exceeds one hour. This occurs in the default player from the streaming server.
View 1 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesWe have FMS interactive configured to do RTMP and HLS streaming. However the clips still can be downloaded through [URL]..Is there a way to disable progressive downloads? While at it is there a way to disable HDS also? I want to allow HLS and RTMP only.
View 7 RepliesI m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 RepliesI have a windows server box 2008 R2 with Adobe Flash Media Server installed on it version 4.5. I have installed Flash Media Server and input the serial and all that fun stuff. All ports have been forwarded properly, Once the server is up and running I go to the admin console just to make sure all is running well. Once up and running I turn to my Media Encoder and enter my FMS URL as well as the stream, (livestream?adbe-live-event=liveevent). I select my input device and it connects and says streaming to primary. Now Yesterday I did this and it was streaming correctly i check with my ipad and the livepkgr was working, I have live video on my ipad. I then went to my website to check and make sure all was working on there and sure enough my live event was being streamed to there was well! Sweet right? No wrong....The server was shut down after this test trial assuming everything was working.
When I turned it on today the flash media encoder still connected and streamed right and when i check the ADMIN console it appears to be working and connected the right way, but my problem is when i go to my website i just get a black screen with nothing playing on it, and on my ipad for some reason I get the last 30 seconds of a piece of the live clip we where streaming last night and then it stops.......I have nooooo clue what is wrong and it is driving me up the wall. My hope is to be able to stream from my mac to my Media Server and then be able to embed it into my website as well as have it playable on ipad/Android (havent worked on android part yet because of this whole problem).
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesWhat would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
I installed FMS about a year ago, and realized that it broadcasts videos in "real time", just the point where the video is, without a "progressive display and download".Maybe there is a mode in FMS that makes it work in "progressive display and download" way in HTTTP connections, just like youtube or any other tube, so, it will be downloading the rest of a video, while playing its previous part.
View 4 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 RepliesWe (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 RepliesI have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
We are running Adobe Flash Media Server 3.5.2 Streaming Edition. It is running on a dedicated physical server with 4 cores and 4 gigs of RAM.
I tested the FMS thoroughly before moving to production. I tested by throttling my bandwidth to simulate different connections. Streaming worked great, but almost all of the testing was INTERNAL, not external. We recently started publishing some videos external. We are getting complaints all over the place that the video is choppy.
During our troubleshooting, we started using one of the native videos from the FMS install. The video is only 5 MB. We have tested from several different connections... Fiber, Cable, DSL.... The test video from our Flash Media Server is choppy... It buffers quickly all the way through playback, it is horrible. We published the same video on a public FMS and it works flawlessly from all of our test connections. Our expert developer has published a CF page with both videos, one from our FMS and one from the public.
I am testing the P2P function of Flash Media Server 4.I have setup two environment for testing, but only one can success to using the P2P.However, i found that there is some problem in network connection.Here is my procedure to create the Peer to Peer Multicast.1. Using Multicast Config Tool ( oolsmulticastconfigurator) to create the "Peer to Peer" type (Generate the manifest.f4m and copy the publisher stream name to flash encoder) --> multicast type: Peer to Peer --> RTMFP URL: rtmfp://true ip/miltocast --> stream name: livestream --> publish password: password --> group name: fms.multicast.example --> ip multicastaddress and port: 224.0.0.254:30000 Using Flash encoder with the public stream name connect to flash media server.3. In client side, we use the example player ( oolsmulticastmulticastplayer)
First Environment (A) - not work
1. Flash Media Server (Data center)
Data center reported that "All the port have opened (TCP/UDP)
[code]....
I know that is possible to make a p2p webcam stream with Cirrus/Stratus or with Adobe liveCycle, but the first is not for commercial use and the second use an adobe's server. Is possible to set up a my own server with Flash media server 4 and then create a application to do what i want? I would to create a webcam stream 1->n using p2p. I cant find any example or any documentation about that and how work the rtmpf protocol of fms4. If i was not clear make me any question.
View 1 Replieshow can we catch streaming from Shoutcast in Flash?
View 2 RepliesI download the Flash streaming server and install it its work fine.I want know about the following question: how to stream the video using playlist? What is the format of the playlist? can i create a playlist from visual studio.Net and pass the value to the player?
View 1 RepliesI am a professional video editor specializing in corporate video and occassionally TV commercials. We often post "review" videos in Flash format to our website for our clients to check progress, etc. These videos are usually around 3 minutes in length and occasionally reach 20 minutes Trt. We use Adobe Production Premium CS4 which includes Flash CS4. I usually export the videos at the included preset, "Web Large Widescreen". The playback is almost instantaneous on most DSL and T1 connections. I use the "Full Screen" option button and when the videos are viewed full screen, they look amazing.
Here is the issue: I have recently created a video for a client that contains text and is approx. 50 minutes in length. The video format is 4x3 and the client wants the transcoded Flash video to display at a 640x480 square pixel dimension. The video plays fine over most DSL connections. It chokes on T1. Question: Can streaming Flash video provide better quality and playability for longer duration Web videos? Could any of you direct me to a chart that compares streaming Flash with the "simulated" streaming typically exported from Premiere CS4's Media Encoder?
we are using flash interactive server 3.5 and have just noticed that when flash player upgrades to 10r32 the streaming fails? Is this a known issue and does anyone know if it is specifically a rtmp prob?
View 4 Repliesi have to implement flash streaming for the relaunch of our video-on-demand system but either because i haven't worked with flash-related systems before or because i'm too stupid i cannot get the system to work as it has to.
[Code]...