Media Server :: Getting "Message Callback Is Not Set." Error In Windows Application Log Cause?
Jan 12, 2012
I am running a very low volume (3-4 simulaneous users) video chat application on FMS version 4 and am seeing the following error generated from FMS (Core) about once or twice a week.Message callback is not set.Any idea what the cause of this might be and whether or not it is impacting anything?Additional information from the event log is as follows..
Log Name:Application
Source: FMS (Core)
Date:1/12/2012 9:07:28 AM
ok, so I got the broadcast running as SE suggested, everything is running smooth local and live except for one thing.every 45 seconds or so, I the encoder displays an error while broadcasting. the broadcast however continues, so I went to the error log in application.00.log. and this is what was there:I'm assuming it has something to do with the length of the file, when I look in the folder that saves the broadcast, is dozens of files that have approx size 1 mb. As the broadcast goes, I see the file being created, and then when it reaches about 1 mb, a new one is born. it ?
Accepted a connection from IP:42.159.56.116, referrer: http://hh.dyndns.org/swfs/StrobeMediaPlayback.swf", pageurl: "http:/hh.dyndns.org/live.htm?source=rtmp://hh.dyndns.org/live/livest ream&type=liveSending error message: Method not found (FCSubscribe).
The installation of FMS 3.5.1 r516 Development fatally failed on our Windows 2008 R2 Server. We tried an R1 server and that one installed with no issues. It gets past the MS C++ installer, then shortly after:
I got this error when i am trying to connect on rtmp://172.31.14.91/live/livestream. Accepted a connection from IP:172.31.14.91, referrer: , pageurl: Sending error message: Method not found (getStreamLength). I don't have any problems with vod but on live streaming is so hard for me to get it.My encoder is a Media live encoder 3 and the media server is media server 3.5.
Dear community, i am searching for 6 days for a solution but i couldnt find. I installed the trial version of Adobe Media Server 4.5. I am trying to host live stream and it is working without error. but when i activate protection (PHDS), server gives en error code: 20...
Here is the server log...
After i could take the Live HDS, i made these settings as described at [url]
We are using a Origin/Edge configuration for massive video delivery, and we are experiencing problems with huge audiences. Basically, when the edge server reaches thousands of users watching (6000) a live video in a single application, this instance is unloaded by the server with the following error:
==> edge.00.log <==2010-06-1115:51:1018614(i)2701054Virtual host Disconnecting unresponsive core live/stream (28860) after 30 seconds is not available.-==> core.00.log <==2010-06-1115:51:1028860(i)2581233Core (28860) disconnecting from admin: 200.-==> master.00.log <==2010-06-1115:51:1018593(w)2581257Core (28860) _defaultRoot_:_defaultVHost_:::_0 is not responding and is being restarted!-2010-06-[code]......
In this situation, the CPU usage is something around 30%, the memory is almost unused, and the load average is very low. We are using FMIS 3.5.3 854a running in the CentOS.
I'm trying to add a custom callback handler to a NetStream client in a p2p application. The problem is, when I add such a handler, the NetStream Client doesn't function as it did before. It seems the NetStream.client object is changed. I know the default object is this. But changing the client to this doesn't solve the problem. The remoteControlStream, is the incoming stream. And the localControl stream is the stream being published. This is the localControlStream that's being send by the peer, and received as remoteControlStream:
private function initLocalControlStream():void{ localControlStream = new NetStream(nc, NetStream.DIRECT_CONNECTIONS); localControlStream.addEventListener(NetStatusEvent.NET_STATUS, localControlHandler); localControlStream.publish(myPeerID+"control"); var localControlStreamClient:Object = new Object(); [Code] .....
The onPeerConnect method of the localControlStream doesn't get called when I connect when the above handler is added. When I remove the that handler, the onPeerConnect method gets called. Obviously the problem is the NetStream.client.
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
it doesn't matter which operating system we install an our server.What are your experience with Linux and Windows?Which System do you recommend regarding performance issues?
Does is matter what HTTP server I use?In the process of upgrading from FMS 3.0 on Windows using IIS 5 to FMS 4.0. Will dynamic HTTP Streaming work from a Windows server?
I'm testing FMS 4.5 using the developer edition before upgrading our FMS 3.5 servers to 4.5 but for some reason creating new vhosts doesn't seem to work. I'm following the exact same steps I would take using v3.5 but 4.5 gives this error:
Currently I have a music player that uses FMS on Windows 2003 Server/IIS 6 in a .Net app.I'm trying to move to Windows Server 2008 with IIS 7. However, the player doesn't begin playing from my list when the asp.net page loads with the player. However, if I run my code in debug mose in Visual Studio on the server, the player is functional. Which leads me to ask - can I use FMS in the fashion I want to? If so, how can I set up my site? I tried putting my app pool into classic mode, which didn't work.
This is showing up in my logs, and i have no idea what is causing it and can't find any more Dropping application (stream_app/_definst_) message. Clients not allowed to broadcast message. It doesn't happen very often, about once every 1 to 2 days.
How can I send some data to ALL peers via p2p-network?I tried using netgroup.post() but not all users recieved this messages.Then I tried to get peers to resend ( via post() ) all the data they have received - this works well, but produces large amounts of additional traffic for all peers (3Ñ…-5Ñ… and more)Is there a way guaranteed to deliver a message from the server to all peers? (not sending data from a server directly to each peer)
FMS does not start in win 7.There were some starts but only when first run after the installation. (i checked it 3 times) After the computer reboot, FMS does not start. Whats the problemm ?
We have an application that works no problems on our server with FMS in test mode. As soon as we enter our FMS license key we get this error: "application is not a valid signed application loading access denied".We removed the license key and it works again, but with user limits obviously, so this is not an acceptable fix.
i want to make some test in flash media server and i want to install it in windows 7.in the past i can install it an work with it with no problem, now i try to install it and dont work.
Is there any application which can relay another application on Flash Media server? For exmaple I have a "live" application on the server. I want another application, "liverelay" which can basically relay what is coming on the "live" application. Is it possible? If so how can I implement it? Looking forward to a response.
We are getting message "Connection has been rejected due to license limit" in flash media server 2.0.5 at the time of connecting to the server. Previuosly that server works fine but today when we tried got above message. May be some changes occur on the system as we dont have controll for that system. But we can check FMS 2.0.5 on that system through managment console of FMS. Please suggest us in which direction we have to look.
Does anyone know of any issues with running FMS on Amazon's EC2 Cloud environment? We're running some live streaming applications, but are hearing reports from users of random disconnects.
FMS 4.5.1 Windows 2008 SP2 (64bit).We are deploying Adobe Flash Media Server 4.5.1 on a new server but Apache does not work (does not serve html files or stream Quicktime H.264 files).Assorted Problems & Error messages:
1. The webroot/index.html page loads locally, but the HLS/HDS streams result in a 2032 error.
2. The webroot/index.html page does not load from external locations:[URL] (does not load externally).[URL] (our old server, FMS 4.0 and Windows 2003). Everything on this server works, the 2 major differences being that it is running FMS 4.x on Windows 2003.
Some RTMP streaming works externally and internally (f4v files):[URL]FMS does not stream Quicktime H.264 files even though f4v files work.New server (does not work): [URL]Old server (Quicktime/H.264 file works):[URL]Apache does not serve Quicktime/H.264 files: I made sure that Apache had all of the correct mime types specified.
Error messages and attempted solutions:Apache's erro_log file: a. httpd.exe: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
2. FMS master.log file
a. FMSHttpd -k start returned 1: [URL]1a: Edited httpd.conf file to include ServerName 63.116.232.5
1b: The presence of this error message also indicates that Apache httpd was unable to obtain a fully-qualified hostname by doing a reverse lookup on your server's IP address. In order for the server to accept external connections a reverse DNS lookup needs to be created. I created a reverse DNS lookup and edited the /etc/hosts file to include the IPaddress, Fully Qualified Domain Name (FQDN), shortname.
Just installed Windows 7 RC (7100), and got the latest Flash player for IE8 and Opera. My site [URL] has a music player I created that plays (streams) MP3s from a Flash Comm Server I run. The player works fine with Flash Player version 10.0.22.87 on other platforms, but not in Windows 7. Once you pick a song, it should start immediately. Even clicking the play button doesn't work. The symptoms make me think there's a problem establishing the netconnection for streaming. I've read Microsoft added streaming of some kind in Windows Media Player for Windows 7, could it be interfering?
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it? The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
For the past while, my developer has been working with me on a small project to put together a live interactive whiteboard app, powered by Flash Media Interactive Server. Well, everything is finished & ready to go, but there seems to be a big problem:
The app was developed & tested on a windows machine, while my server and all my website files (to integrate with) is on a Linux system.
It's been a month since this problem arrose, and there had not been any further progress with this project for the time. My developer doesn't seem to know much about how the 'conversion process' works, if there is one.
Do you know if this is possible (to convert a windows-programmed app to work on a linux system)? If so, do you know roughly how it should be handled?
