Media Server :: HTTP Based Origin / Edge Configuration?
Dec 13, 2011Is it possible that support origin/edge configuration with http-based in FMS? If so, how do I configuration for that?
View 2 Replies
Similar Posts:
Media Server :: Edge/Origin Clustering?
Feb 1, 2010I am having a multi user application running in FMS. I need to cluster them using Edge/Origin with Origin failover.I went thru, http:[url]......My questions are,1) which software load balancer can I use? Is there possiblitiy of configuring the fms server to be reverse proxy.http:[url].... in the below link its mentioned that we can configure edges in 4 ways.Client auto discovery proxyServer auto discover (reverse proxy)Explicit URIImplicit URI (recommended)what configs do I need to do.I was successfut only Explicit URI way by configuring the Vhost.xml. How would I do for others?
View 1 RepliesMedia Server :: RTMPE Between Edge And Origin?
Jul 15, 2011I would like to know when this feature will be available. As well as rtmpe between FMLE and Origin.
View 1 RepliesMedia Server :: HDS VOD With Origin/Edge Setup?
Jan 29, 2012Is it possible to use origin/edge setup when streaming using HDS ? I have succesfully tested using RTMP but when I try the HDS string - get error "we are having problems with playback". I can view the stream directly if I connect to the origin server. I have 1x origin server and 1x edge server.
View 2 RepliesMedia Server :: Clustering Origin / Edge Docs
Aug 15, 2010where can I find step by step guide for clustering FMS? url...but , it is not clear what exactly to do , it just says like :Install and configure the first Flash Media Server.Use the same serial number and license file each time you install Flash Media Server.NOTE A special cluster license file is required. For more information, contact your Macromedia representative.Confirm that this Flash Media Server instance is working correctly.Configure the Flash Media Server instance as an origin server.Install and configure the next Flash Media Server in the cluster.Configure this Flash Media Server instance as an edge server.Make sure this edge server points to the origin server.Repeat steps 5 through 7 for each edge server that your license file allows. ".
View 3 RepliesMedia Server :: Edge Origin On Live Applications
Sep 22, 2010I just came accross edge origin configuration. I was wondering if this would be good if I use Edge-Origin configuration on live applications, like live Video Chat or sharing a drawing board. I understand that they will be useful in case of failures of edges. But unlike 'videos on demand' applications like streaming, edges will help since the edges will cache them. So for a live application, apart from failover any other advantages of having Edge-Origin setup?
View 3 RepliesMedia Server :: Origin - Edge Limitation On VOD But Not On LIVE
Feb 23, 2012we have an origin server where video materials are stored and one edge where clients are conected to.
If i allow clients to connect directly to core server it can go easily to 1000 users without any problems. If the clients connects to edge after 100 users the player will start buffering the video every few seconds.
On the other hand if i connect a FMLE to core ( same video bitrate as materials already encoded ) clients can connect to edge and there is no problem
( tested with 1000 users ) and no buffering issues appeared.
There is no IO wait problem on core, edge is configured not to use any cache. There is no connectivity isssue between master and edge.
Both origin and edge are 4.0.3.
Media Server :: Stream Play And Origin Edge Setup
Apr 28, 2010I'm stuck trying to get a Stream.play() call on a recorded video file (.flv) to translate from origin to edge servers. Don't even know if it's possible. If I call Stream.play() on a server, and connect a viewer directly to that server, the viewer sees the stream play. If I call Stream.play() on an origin server and connect a viewer to edge servers the stream does not play.
Is it possible to configure in any way that the play() call would propagate to edge servers? According to FMS 3.5 docs on the Stream class, the following is the case:
"When you call Stream.play()on the server, the server becomes the publisher."
See [URL].
If that server becomes a publisher and lets say it was an origin server on a CDN, shouldn't the other machines in the configuration receive the published stream? Somehow when you publish a live stream to an origin server it makes its way to edge servers. Is this analogy not relevant to the scenario wherein you call Stream.play() on a recorded file?
Media Server :: Built-in LoadBalancer For Origin/Edge Servers
Jun 10, 2011We are currently deciding what to use: Wowza(not so much, since they are undergoing the lawsuit) or Adobe Flash Media Server. The problem is that I couldn't find any information on how to configure the loadbalancer using FMS. I tested with Wowza and they use built-in loadbalancer but not so for FMS. Forgot to mention that we need it mostly for live events using RTMP protocol. My current configuration has 1 origin server + 2 edge servers(trial developers edition). I can manage to play livestream from the edge--origin servers using egde url. How can I configure the edge server so that when I connect to the origin server it redirects me to the least loaded edge server?
I tried to set up the connection limit for the origin server for 2 connections(one for the fmle, one for edge) and connect with 5-10 clients but my origin server didn't redirect the stream to the edge.
Connect One Edge To Multiple Origin In Flash Media Server?
Mar 20, 2012Is there a way to do this?One edge to connect to two or more origin.
View 4 RepliesMedia Server :: Deploying Edge And Origin Server?
Dec 21, 2010I have setup an Origin and Edge server to offload live and VOD content. However, my end-users are pointing explicitly at the Edge server. Is there any way to configure the setup so the Edge server (proxy)is transparent and the end-users only know about the Origin server?I am trying to configure video split streaming with FMS.
View 1 RepliesMedia Server :: Edge / Origin Server Configurations
May 27, 2011I've been trying now for few days to configure an Edge server that would connect to our working Origin server. I have not changed anything on the Origin server and media are served properly I can easily play all media from the videoPlayer.html sample app distributed with the server.
[Code]...
Media Server :: RTMP Based HTTP DVR Functionality And HLS Based IOS Functionality?
Jan 20, 2012I want to use RTMP based HTTP DVR functionality and HLS based IOS functionality, So I need to know how to MPP from my existing DVR app to the livepkgr app so that the stream being recorded at the DVR app can be used by the Flash and Stream MPP over to livepkgr app and can be used by the IOS HLS.
View 1 RepliesFlash :: Media Server - Automatically Configure Edge From The Admin Console Of Media Interactive Server?
Jan 17, 2010How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesMedia Server :: XML Configuration Of FMS And Customization
May 7, 2009An observation about the configuration files (XML) of FMS. When we roll out new versions or upgrades, it almost always involves updating or modifying the files in the conf/ directory. If it's within a certain revision, we generally copy them over from the previous install and it's fine. In the case of FMS 3.5, new configuration directives were added which necessitated our doing a fresh reconfigure to ensure everything was accounted for.
What I believe would make for an easier configuration process is to utilize the inheretance aspect of XML, allowing for a LocalSettings.xml file which would be read in by FMS last, overriding any default settings thus eliminating the need to alter the default *.xml files. Any new settings introduced that require changes can be imported as needed.
Overwriting the stock conf/*.xml files with new information would not interfere with your custom settings as they would remain intact in LocalSettings.xml. Any conflicts could be reported to the logs or stdout. One exception being fms.ini -- which could easily be revamped into XML and used in the above model.
Media Server :: Invalid Value Set For Configuration Key?
Jul 28, 2011I had installed a FMS 3.5.6R6003 in a Cent.O.S linux with an Edge configuration... and i have found the following error in the /var/log/messages...!!!
Configuration[19756]: Invalid value set for configuration key : Application/Process/Distribute = Instances, using default to be compatible with inst..Configuration[19756]: Invalid value set for configuration key : Application/Process/Scope.numprocs = 5, using 1, to prevent app inst getting split among multiple processes.
But, even with this warning, the FMS is running apparently normal...
Media Server :: Acceptable Configuration To Install FMS?
Aug 26, 2009We're in process of trying to purchase a new server. Our server unit wanted to provide a VM instance, which I told them would not work (according to the documentation). So, their next suggestion is to provide a blade server. Is this an acceptable configuration (assuming they meet recommended CPU/RAM requirements) to install FMS?
View 1 RepliesMedia Server :: Fail To Connect Origin Server Through NAT
Apr 11, 2010i have install a delveopment origin server for FMS testing, it can success steam VOD through internal ip, then we move on to test external ip steaming, but if fail to connect through external ip address, our firewall is using NAT mapping for the ip address, we have enable port 80 & 1935, did we need to change to edge server? i have try to change the vhost setting, but once i change the setting, internal & external will fail to conenct it, i have modfiled these setting in default vhost.xml, did any thing i need to change it? <Mode>remote</Mode> <Anonymous>false</Anonymous> <LocalAddress>all</LocalAddress>
View 1 RepliesMedia Server :: Using Port 81 Fallback For Apache Configuration
Dec 14, 2011I need to upgrade FMS 4.5 for HDS/HLS streaming. I am using Server 2008 and I need to use IIS7 port 80 for legacy web sites. I would like to configure in fms.ini using ports 1935 and 81 and Apache requests to port 8134. Can I use this configuration? Do I need to open ports 81 and ports 8134 in the network? What is recommended in this case?
View 5 RepliesMedia Server :: Adding Edge Servers To A Live FMS Server?
Nov 26, 2009Does anyone know if this is possible I have an FMS server in our production enviroment that contains multiple vHosts, at the moment I have one edge server setup for each host based on the comment at the bottom of this entry:[URL]
View 1 RepliesMedia Server :: Only Allowing RTMPE Connections To An Edge Server
Jul 8, 2011I have a setup where I have some edge servers (as in <Mode>remote</Mode>) that pull content from an origin server. I only want to allow RTMPE connections to the edge server. I'm trying to do this by using the <DisallowedProtocols> element on the origin server. I'm setting: <DisallowedProtocols>rtmp,rtmps,rtmpt</DisallowedProtocols>
in the relevant Vhost.xml on the origin server. However, when I do that, proxying through the edge server stops working. I get a "Connection attempt rejected by FMS server [ Server.Reject ] : Connection failed." from OSMFPlayer (which I'm using for testing) and these lines show up on the origin server's core.00.log file:
[Code]...
Media Server :: Restrict An Edge Connection To Core Server?
Feb 15, 2012I want to restrict unauthorised edge servers connecting to my core server . How do i do it?
View 1 RepliesMedia Server :: Configure A Back-up Origin?
Apr 14, 2010Flash Media Interactive Server 3.5We currently have an Edge/Origin configuration. We have another Origin Server to be used for fail-over. How do you setup a back-up Origin Server?
View 4 RepliesMedia Server :: VOD Is Stopping Whenever Origin Restarts
Jun 10, 2010<running environment>
-windows 2003 server
-using linux based load balancer(two origin only FMIS)
-FMIS 3.5.3
-default settings of all XML, CONF
-origin only and 2 servers
-providing live and vod services(vod files are placed in NAS storage and FMLE is feeding live video)
-only alphabet charater file name (no * , no _, no other special character) of VOD files
-nomally 300 VOD clients and 200 LIVE clients are connected on live time.
-changed HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters MaxUserPort created and set value 65535 in registry)
[Code]....
Media Server :: FMS Origin-Only Clustering Setup
Nov 9, 2010I was successfully able to setup FMS edge-origin cluster but Origin-only clustering is the one we wanted for our live applications. The only place I found was 'Large Scale Deployment with FMIS'. I guess for Origin Only Clustering, we need to have our own caching system. What does get cached in a Live AV Chat? How do I propagate it to other Origins? What kind of plugins would I need for cache managing? What should the plugin do?
In the attached Origin Only Architecture, what does the Primary Origin do and Secondary Origin do? I thought Origin is the place where the application is actually running and Edges do proxy. Is it the same here in Origin-only clustering also? Are there any tools which can measure the lag in AV? (like performance measuring tools or load testing tools for FMS). What kind of software Load Balancer can we use for FMS clustering? (Like Nginx, Zeus or something?)
Media Server :: Clustering Origin For Each Application
Nov 15, 2010I have an FMS Clustered in Edge-Origin configuration. Can I have different Origins for different applications but the same edges?.I have multiple edges forwarding the requests to the Origins based on the application name?[code]And if its possible, can someone advice the advantageous of having different Origins for different Applications?
View 6 RepliesMedia Server :: Setting Up Flash - If I Setup Another Channel Pointing To The Other Edge Server Ip Adresss It Doesnt Work?
Sep 24, 2011i have a orgin server and 2 edge servers and a load balancer
first off im confused in each edge server i set them to be remote, rtmp and changed the routeentry to <RouteEntry>*:*;96.44.***.***:1935</RouteEntry> on both servers
orgin server is just local
what my question is im streaming to orgin and its getting sent to 1 edge and other edge is doing nothing no traffic the stream i set it this way url:
'rtmp://173.254.***.***/live/live_test',
which is the 1 edge thats working if i setup another channel pointing to the other edge server ip adresss it doesnt work.. what am i doing wrong isnt all this supposed to be load balanced or am i missing steps...or did i do it wrong on the flash player config.
Media Server :: Recording Video/audio Files Using Flash Media Server Through Rmtp, And Allow Users To Access The Recorded Files Through Http?
May 25, 2009As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesMedia Server :: Do An In-place Upgrade From 3.5.2 To 3.5.3 On Origin Servers - Recommended Precedure?
Apr 20, 2010I need to do an in-place upgrade from 3.5.2 to 3.5.3 on my origin servers. Is there a recommended precedure to acheive this? I want to have the minimum downtime possible. CentOS, x64. I think something along the lines of :
[Code]...
Media Server :: 'URL Missing From Media Tag' On FMS4.5 HTTP Live Stream Playback?
Mar 30, 2012'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........