We're in process of trying to purchase a new server. Our server unit wanted to provide a VM instance, which I told them would not work (according to the documentation). So, their next suggestion is to provide a blade server. Is this an acceptable configuration (assuming they meet recommended CPU/RAM requirements) to install FMS?
View 1 RepliesAn observation about the configuration files (XML) of FMS. When we roll out new versions or upgrades, it almost always involves updating or modifying the files in the conf/ directory. If it's within a certain revision, we generally copy them over from the previous install and it's fine. In the case of FMS 3.5, new configuration directives were added which necessitated our doing a fresh reconfigure to ensure everything was accounted for.
What I believe would make for an easier configuration process is to utilize the inheretance aspect of XML, allowing for a LocalSettings.xml file which would be read in by FMS last, overriding any default settings thus eliminating the need to alter the default *.xml files. Any new settings introduced that require changes can be imported as needed.
Overwriting the stock conf/*.xml files with new information would not interfere with your custom settings as they would remain intact in LocalSettings.xml. Any conflicts could be reported to the logs or stdout. One exception being fms.ini -- which could easily be revamped into XML and used in the above model.
I had installed a FMS 3.5.6R6003 in a Cent.O.S linux with an Edge configuration... and i have found the following error in the /var/log/messages...!!!
Configuration[19756]: Invalid value set for configuration key : Application/Process/Distribute = Instances, using default to be compatible with inst..Configuration[19756]: Invalid value set for configuration key : Application/Process/Scope.numprocs = 5, using 1, to prevent app inst getting split among multiple processes.
But, even with this warning, the FMS is running apparently normal...
I need to upgrade FMS 4.5 for HDS/HLS streaming. I am using Server 2008 and I need to use IIS7 port 80 for legacy web sites. I would like to configure in fms.ini using ports 1935 and 81 and Apache requests to port 8134. Can I use this configuration? Do I need to open ports 81 and ports 8134 in the network? What is recommended in this case?
View 5 RepliesIs it possible that support origin/edge configuration with http-based in FMS? If so, how do I configuration for that?
View 2 RepliesI'm doing a test install before we update our old server to 4.03.I've got the server software installed and configured (4.03 server, using iis for web).All the test stuff on the sample index page works, except for the dynamic stream tab.I've eyeballed the .f4m file, and tried putting in a complete url to the samples...but no luck.i just keep getting the stock connection timed out message.
Where do i need to look to start confiriming where this issue may be coming from?I've made made sure I can reach all the test videos by making flash players for them, calling them via rtmp... no problems.It's got to be something dumb with either the f4m file, or the way it's being served (btw, i have added all the mime types to iis , including .f4m as video/mp4....which is one of two ways I've seen it added).
i have FMS Installed And after its installed i also Install The Addon Auth to make a username and password so no one else can just start a Stream but after i install it and restart the server it wont work any the fms does work but the addon doesn't.
View 1 RepliesI created a video live recorder and its working fine locally. Now I want to add the video recorder to my website. What is the steps to add this in my website? Whether I need to buy and install FMS in my server?
View 4 RepliesI want to to instal FMS and Wowza Server on same machine any one know about this
View 3 RepliesI have apache web server installed on linux with one ip and some virtual hosts. Can I install fms on this server?
View 1 Replieshow can I install and configure Red 5 media server in my web server?
View 5 RepliesThe FMS_auth_addin_win_v3.msi insists to put the files into C:Program Files (x86)AdobeFlash Media Server 4conf but the server is installed in C:Program FilesAdobeFlash Media Server 4. I nuked all the Abobe content in the 32 bit area, but it keeps re-installing it there. The server used to run 32-bit FMS 3.5, but since we upgraded, I can't get the authentication addin to work. Can I just copy the thing over?
View 11 RepliesI attempted to Install FMS 4.5 with all its modules by installing apache seperately from the FMS installer on Linux However the installation notes do not specify how or where to get the information on how to install all the FMS 4.5 functionality such as HLS to Apple/IOS. But this is the part that messes me up if I install YOUR version of apache then it is supported. Now correct me if I'm wrong because this was the case the last time I tried to install your version of apache. Last time I installed your bundled version of apache and then attempted to install PHP for apache with the modules GD,php_mysql and it didn't work. I attempted to make it work for days. So please tell me how do I install PHP,PHP_GD and PHP_MySql on your bundled version of apache? Also How do I install FMS 4.5 including HLS for Apache on Linux/ Windows that is not bundled or for Microsoft IIS ?
View 13 Repliesi want to make some test in flash media server and i want to install it in windows 7.in the past i can install it an work with it with no problem, now i try to install it and dont work.
View 1 RepliesI'm attempting to install and run FMS on a Red Hat Enterprise Linux system. At one point, it did function properly, but now it will not stream video at all, and I keep getting a constant stream of errors. No changes were made to the FMS configuration to make it stop working. Attempting to load it in console mode results in the following:
-bash-3.2$ ./fmsmaster -consoleAdobe Flash Media Server (Master)Console mode.FMS detected IPv6 protocol stack!FMS config <NetworkingIPv6 enable=false>FMS running in IPv4 protocol stack mode!Host: uberserver IPv4: 127.0.0.1Server starting...Edge (13199) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name
[code]....
The assert errors continue until I terminate the process.
i purchased and installed FMS on my dedicated webserver from my hosting provider. I have all my sites on this server. now that ive done this what do i do next? I want to play VOD to site visitors. i tried copying and pasting code in my dreamweaver file but i get black box. I can play the live stream sample files on my dedicated server
View 5 RepliesThe installation of FMS 3.5.1 r516 Development fatally failed on our Windows 2008 R2 Server. We tried an R1 server and that one installed with no issues. It gets past the MS C++ installer, then shortly after:
[Code]...
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it? The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
View 5 RepliesI have installed FMS on windows2003 std on a dedicated server. The server was running windows media services, shoutcast and IIS6 I have killed all these services and am just running FMS so as far as i know port 80 is not in use I can connect the encoder using this address rtmpt://xx.xx.xx.xx:1935/live Does anyone know why i cant just use rtmp://
also if i load the interactive tab on the index page in the webroot, I can connect and i can view the stream but no matter what code i use to embed the player, they all fail to connect yet i can view the stream on the interactive tab.
I have installed fms 4 in windows 7 in my computer, but i cant get it work with a flex application that i have in a server. I added the port in my router's settings
[code]...
So I have a LAMP stack on a virtual server and would like to install FMS without using the apache that comes with FMS - I would rather just keep on using the currently installed LAMP-stack - is there a tutorial or documentation on how to accomplish this?
View 2 RepliesI need to read the URL that the browser shows when a Flex application is called because I would to reference it in a mxml configuring Cairngorm remote objects. The goal I would reach is to automatically configure Cairngorm services from environment to environment (dev,test,qa,prod) without statically set the value in the mxml or other ActionScript. Since the Flex client is deployed in the root of the war of the webapp, it's enough to read where the browser is pointing.
I have written a class that is doing so:
public class ConfigServer {
public function ConfigServer() {
var loaderUrl:String = FlexGlobals.topLevelApplication.loaderInfo.loaderURL;
var urlToSet:String = <loaderURL-string-manipulation>;
_serverUrl = urlToSet;
[Code] .....
But whenever I call the ConfigServer constructor and for every (known to me) technique I applied (statics or singletons or public ro so on), I have always had the same error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at org.fao.fapda.util::ConfigServer()[C:devworkspacesFAPDA runkFAPDA-clientsrcorgfaofapdautilConfigServer.as:8]
Cairngorm services initialization is done as follow:
<fx:Declarations><cut/>
<services:FAPDAServices id="services"/>
<cut/></fx:Declarations>
And the problem is that FAPDAServices.mxml is read runs before FlexGlobals is valid. Is there a point in the Flex Application lifecycle where such loaderURL is defined so that I can construct ConfigServer? When in startup events that initialization in done?
I would like to install Flash media on my Dedicated VPS server but I have no Idea as to how to go about it.
View 2 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 Replies