I can get my livestream working with the livetest application included in my FMS v3.0 application folder. When I try to connect to the livestream using any other flashplayer with the right settings, it simply wont work.
[Code]...
FMS receive livestream (on Media live encoder or other way). Output device in my program [url]...
How i save permanently this media stream to hard disk?
I'm running the development edition of FMS 4.5 and am trying to get HLS working. Whenever I attempt to publish a stream from FMLE, I receive the message:
f4f:livestream - NetStream.Record.DiskQuotaExceeded
in the livepkgr application instance and Failed to record livestream (disk quota exceeded).in the server log.I realize there are limitations on the development edition (10 minutes of iOS streaming), however usually these limitations restart when the server is reset. I've restarted the application instance and the server itself, manually starting and stopping the service, and I still receive that error when I first connect and try to publish the stream right after a server restart. I've reset the server multiple times to no avail.
The recording settings in the application.xml are all set to the defaults (-1 for no maximums).Unfortunately I've never been able to get this to work yet so I'm not ambitious enough to start testing it on any production servers.
I want to know if FMS works for IPTV?
View 18 RepliesI would like to know how bandwidth detection works in FMS? Does it downloading something or what? Does FMS is using rtmp or http protocol to check it?
View 7 RepliesI need a solution for this: when the port 1935 is closed, the NetConnection switch rtmpt (port 80). The NetConnection class built in function: proxyType="HTTP" not works or I use not rightly.In the FLVPlayback class works this function, but I don't know how..
View 7 RepliesI have managed to install the trial version of FMS - developer 4.5 using the defaults including Apache, and it works reasonably well. However it has used-up all the available IP addresses so that IIS does not now work. I need IIS and FMS to reside together on the same server, as IIS provides document download and upload for our web-site on a different server. I have tried changing the FMS.ini file to limit the IP and Ports used, but to little use. My server is Win2k8 R2, and IIS V7.5 + V7.0 for FTP; all 64bit.
View 6 RepliesI'm currently having an issue with FMS4 developer edition on both Linux (x64) and Windows XP (x86).When I stream a webcam using ns.publish("foobar", "live") I can watch the live stream on another client, however when i use ns.publish("foobar", "record"); neither broadcasting nor recording works.Using the "live" parameter the client appears in the log files and in the administration console as "publishing", using "record" the client appears as "idle".Is there anything I need to configure besides LIVE_DIR in fms.ini?
Is this a restriction in the developer edition? Here is the relevant part of the code (condensed):
--------------------------------------------------------------------
var camLive:Camera = Camera.getCamera();
var nc:NetConnection = new NetConnection();[code]............
I followed Tom Green's tutorials and at this point I can publish a live stream which I can view and interact with just fine on my local LAN.The FMS is NAT'ed to the outside world and I have ports 80 & 1935 open to the server.When I use a browser from the outside world and put in the servers public address I can see & interact with the FMS start page just fine. I can use the "interactive" tab and supply my live stream name and view the stream just fineHowever when I try to launch the Flashplayer that I built all I see is the controls with moving stipes, No video feed above. I can browse to the flashplayer HTML file on my local LAN and it works fine. Interestingly enough I cannot open the flashplayer HTML file directly on the server either (but I can open the start page application and interact with it).
View 1 Replies:1111/admin/getApps?auser=admin&apswd=mypasswordLists all the apps in defaultVhost but I need to list all apps under a certain vhost how can I do that?Also when trying to load and onload apps for that virual host doesn't work with the main admin user and pass.So when I try to use the user name and password for that vhost I get
<level>error</level><code>NetConnection.Connect.Rejected</code><descri ption>Admin user requires valid username and password.</description><timestamp>Wed 13 Apr 2011 05:09:26 PM EDT</timestamp></result>
[code].....
I'm currently having an issue with FMS4 developer edition on both Linux (x64) and Windows XP (x86). When I stream a webcam using ns. publish ("foobar", "live") I can watch the live stream on another client, however when i use ns.publish("foobar", "record"); neither broadcasting nor recording works. Using the "live" parameter the client appears in the log files and in the administration console as "publishing", using "record" the client appears as "idle". [code]
-Is there anything I need to configure besides LIVE_DIR in fms.ini?
-Is this a restriction in the developer edition?
-Is there something else I'm missing?
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again. I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
[Code]...
I'm having trouble connecting to a remote persistent shared object. When I run from the Flash authoring environment it works. But when I run it from a browser it doesn't. The code attaches an event listener to the sync event, and then calls so.connect(nc).
As mentioned - it works inside Flash authoring only. In both cases the connection to the server is successful. I also tried setting client.readAccess to "/" in the application.onConnect function of the server-side code - but it doesn't help. (Everything was written by me including the server-side application code. I have full control and access to the server).
Also, I can see the remote object exists on the server in the admin console.And as mentioned, when running inside Flash CS5 - the onsync gets triggered after connecting to the shared object.But, the same code under a browser - doesn't trigger the onsync.The SharedObject.getRemote method on the client side returns an object on both occasions.
I have my stuff set up and everything works fine except for a very strange glitch.When I use the internal IP address (192.168.###.###) from a machine on the internal network, it works fine.When I use the external IP address (209.###.###.### which eventually maps to that internal IP address) from a machine out in the world, like at home or a hotel or a clients site, it works fine.But, when I use the external IP address from a machine on the internal network, everything works except the flv file doesn't stream. The HTML page displays, the swf player displays, but the flv file doesn't stream; the swf player displays the message "Connection Error. Please press Play to try again."
What could possibly make this happen? To me, it seems impossible. Could there be a setting in FMS that would cause this sort of thing? I very much doubt it is a firewall issue, because if it were, then the file wouldn't stream from outside the firewall.
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I need to move recorded media files at my fms account to some other ftp account. How can i achieve this through server side scripting.
View 2 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.