Created a SWF 65kb in CS3. It plays the SWF fine offline. followed the CS4 classroom in a book scenario & copied it to CS4 thinking it might fix any errors. The CS3 version would play on IE screen but not on my server (server supports flash). CS4 plays it on the screen but not on IE. The Scripts/install & object files were uploaded to my server.
View 4 RepliesI've been chased a lot of things, but so far not found anything very practical, such an example that makes me understand the workings of Flash Media Server, something like transmit, share my webcam or camera!
View 3 Repliesi need to stream a live TV Online. I have a computer with windows server 2003 and i wiil instal the adobe flash media server. I need to understand whow i can do this. I am a bigginer, what is the steps for i build a flash media server.
View 2 RepliesI'm working on e-learning project using ASP.NET,C#,SQL Server and Windows XP.I'm developing an interactive videoconferrencing using WebCam and at the same time i want to share the user desktop screen. Through FMS videoconferrencing(WebCam) is working fine. But i'm unable to share screen to online user
View 3 RepliesTask is to take online interviews and record them for lather reviewing. I m new to media server and video streaming.
View 3 RepliesI got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.
I have an *.flv file on a FMS. When I play it on the client side the video plays just fine, but when I call Stream.play(filename, 0, -1, false) on the server side the video turns out really choppy.I both cases I use NetConnection to connect to an rtmp and NetStream to play the stream, but in one case I connect to a stream and request the server to play my file on that stream. Apparently that doesn't work with files? It works just fine for live streams.
View 20 RepliesI am streaming pre recorded audio files (mp4) to an AIR client. I have tried two different solutions,
streaming the file directly with the NetStream.play("mp4:xxxxx.m4a") and creating a server side playlist, adding the same sound clip and then streaming the playlist. The problem is, when streaming the playlist i get a few NetStream.Play.InsufficientBW, this does not happen when streaming the file direct. Both solutions uses bufferTime=1.0
I would like to use a server side playlist to implement a simple key solution so that the client dont know the full path to the file, but instead sends a key to a custom server side function that looks up the file path and creates a stream for the client.
We use FMIS (3.5) to distribute our videos, but how can I use HTML5 to view them without duplicating the video to the HTTP VOD directory.Can I point to the application FMS file location like I can with RTMP in some way?
View 2 Replieswhen i click on link play any ad then paly any flv. tell me how to attach ad and flv both.only on click first play ad then flv.
View 1 RepliesI have the FMS working with .flv files but I can't seem to get .mp4 or any other format file to play using it?
View 2 RepliesI'm using Flash CS3 Pro. I want to play over 5h FLV video by FLVPlayback. but 4h video -> no problem. 5h video -> seekbar and total time view have BUG. duration : 21117.796totalTime : 4340.615 why return different value??? FLVPlayback have limit of flv??
View 1 RepliesMy application is samaatvlive in which right side video list when user click on specific video then first play ad then flv video. It is custom player.
View 1 RepliesUsing SSAS on FMS3.5, is there a way to get the stream name of a play event? In my case, I am trying to run additional steps when a stream is played and I need the stream name to do so.
View 3 RepliesSo, I've got my videos set up on the server structure right. I've got them referenced properly in the Flash playback component.But some of the videos on the server stream and some don't.The ones that don't still show up as connections in the Administrator, though
View 5 RepliesI need application that will stream flv like on TV that all connected users will see same stream. If they close and than connect they will see what is going on not form beginning
View 3 Repliesmy problem is that FLV streaming stopped for seconds.i found this log in edge log file. (below)
#Version: 1.0
#Start-Date: 2011-03-01 00:08:40
#Software: Adobe Flash Media Server 3.5.1 r516
[code].....
the question is,a client which can use "rtmfp" to connect to a FMS server,and the connecting success,Whether Can not guarantee that the client can play the Multicast video? because the client may be behind a Special firewall So he may connect to the FMS server ,but can not use P2P to connect to the members those are in the group?
If the answer is "yes",Whether i should make a check function that make these client back to "RTMP"?
How to play a FLV file located in a second FMS not directly accessible by the flash client?
- I am publishing an audio stream from the flash client to a FMS;- This FMS then publishes the stream to a second FMS, which records the stream to a FLV;
How can I play in the client the FLV audio file that I recorded in the second FMS?
- The first FMS is accessible by the flash client, but the second FMS is only accessible by the first FMS.
I would like to show the live TV video on Flash player from my TV tunner. Is it possible to do it without FMS like using Webcam?
It will not be running on the internet/network and only for a computer that have TV tunner. (Ideally: open a swf and you can watch a TV tunner by flash player). But i cannot find any information if i can do it without FMS.
I've setup a simple DVR player using the DVRCast application and Adobe FLVPlayback 2.5 from Adobe tools. I'm able to use it to play a recorded live stream which is recorded by Flash Media Live Encoder.
I'm wandering if I can now use the DVR player to play a video within the vod application?
To start with I just want to copy the f4v file created by Live Encoder to the vod directory and then use the DVR player to play it.
When i publish the streams on a linux server, the .flv files have permissions like this:-rw-rw----. And i don't have permissions to access this file on a client browser... Currently, i can only change the permission using "chmod" manually
View 2 RepliesI have FMS 4 and using AS3, no matter what I do I can't get any of my recorded FLVs to play in FLVPlayback.
Is there somethign I'm supposed to install on FMS to get it to play properly?
WHat should my path be? I've been told that the flv are living in the fms/applications/storyvideos/streams/videos folder.
I've tried every combination of paths I can think of.
i have a linux machine with two NICs, one for Apache/PHP (port 80) and the other for FMS 4 (ports 1935, 80). I need to use RTMPT over port 80 due to our organization wireless network restrictions. I think i have set up everything right, but we cannot see any video using the wifi clients. Apparently, the problem disappears when opening the firewall and allowing port 1935 traffic.
[Code].....
I'm trying to limit a client's video playback to 10 seconds.After that,the client should be disconnected.I have to allow time for connection and buffering, so I can't just disconnect them after 10 seconds.I was hoping to override the play command, so I can force the length parameter to 10,
View 7 RepliesI've spent like the past 5 days trying to get this to work as a client has given me 100GB of videos that are in subfolders. For some reason I'm unable to play media from any subdirectory in vod.
All of the media & subfolders are here:
C:Program Files (x86)AdobeFlash Media Server 3.5applicationsvodmedia
This works:
C:Program Files (x86)AdobeFlash Media Server 3.5applicationsvodmediasample.mp4
Server: rtmp://localhost/vod/_definst_
Stream: mp4:sample.mp4
This doesn't work:
C:Program Files (x86)AdobeFlash Media Server 3.5applicationsvodmediasubfoldermovie.mp4
Server: rtmp://localhost/vod/_definst_/subfolder/
Stream: mp4:movie.mp4
I've also tried as the server rtmp://localhost/vod/subfolder/ but it does not work.
I've also tried in the stream "mp4:subfolder/movie.mp4" that doesn't work either.
I am testing fms this days, I have put all my files(such as 1.mp3,2.mp3...n.mp3) in my directory.I can play single file fine with url like this: rtmp://localhost/mp3/mp3:x/2
but i want to know is there any way to play all files in my direcotry? for example, user click the play button, the player(smp) automatic plays all files in the directory, link windows media server.Should I use playlist? Or there is another better way?
I'd like to divide to different folder name by name, so i build a lot of document under _definst_ i can play flv vedio at applications eststream\_definst_sample, but f4v(mp4)can't
View 2 RepliesI'm recording audio using FMIS, the file is being saved out as a FLV file and I am able to play it back. Eventually that file may be deleted after some time and I would like to notify the user if the file is no longer available. I was expecting to see NetStream.Play.StreamNotFound after deleting the file on the server but I'm not getting that message. Instead I get:
--> NetStream.Play.Reset--> NetStream.Play.StartAnd nothing plays which is expected since the file is deleted, but I dont get the right message. I'm calling the file like so:ns.play ("flv:file_to_stream");
I have been looking for a way to tell what file was requested from within a VOD app when a video is played. I want to use the file name for something else but I dont want to have to send it with a second argument in connect().
Is it possible to tell what file is requested??? If so how can I do this??