i have a linux machine with two NICs, one for Apache/PHP (port 80) and the other for FMS 4 (ports 1935, 80). I need to use RTMPT over port 80 due to our organization wireless network restrictions. I think i have set up everything right, but we cannot see any video using the wifi clients. Apparently, the problem disappears when opening the firewall and allowing port 1935 traffic.
[Code].....
I am publishing my live stream with rtmpt protocol on port 80,to overcome network proxy.
But after 10 to 15 minutes (telecast) video get stuck and connection get lost.But i don't
have this problem when i use rtmp protocol with port 1935.
1) I am trying to make connection with Flash Media Server to publish live video streaming, and I am sitting behind proxy and firewall, I am not able to make my connection with rtmp that's why I use rtmpt to make my connection with media server to publish .But in this case after publishing some time(ie 5 to 10 minutes) connection break down and streaming get stopped .The same problem occurs when I use "Flash Media Live Encoder 3" to publish live stream .
2) I am making my connection like this "rtmpt://xx.yy.zz.kk:80/Training" where xx.yy.zz.kk represent live System IP where Flash Media Server is running.
3) After analyzing the problem I observed that while publishing the stream ,http requests from Publishing system keeps on increasing and at one time it crosses the limit of proxy server (our proxy can handle 600 http requests per minute from any client PC) so streaming get stopped.
4) Then I attended "adobe connect pro" Trail classroom session by sitting behind the same proxy and firewall,But in this case my live video streaming is not breaking down ,as per my understanding adobe connect pro also use Flash Media Server for streaming.
We have a pool of FMS 3.5 servers behind a haproxy load balancer. They are working fine with RTMP and download with HTTP through FMS proxy. We need now to have RTMPT working for some clients behind a strict firewall.
1) We started configuring the haproxy load balancer to work in HTTP (level 7) mode and we changed the FMS Adaptor.xml configuration file on all servers with the tag below:
[Code]...
I am trying to connect to the Flash media servers from behind a customer's firewall.From behind this firewall the time taken for a response (its usually success) is around 20-25 seconds.The following is the code I am using to make the connection and listen to the events
var nc = new NetConnection();
nc.addEventListener(NetStatusEvent.NET_STATUS,netStatusHandler);
var time1:String = (new Date()).toTimeString();[code]........
The delay between time1 and time2 is always 20-25 seconds. From other firewalls and non firewalled networks its usually 3-4 seconds.What could be the reason for this huge delay for a response in this case. I have noticed that the first response is always a "NetConnection. Connect.Success".We are looking to deploy around 20-30 media servers if we can get this thing to work and appreciate any prompt response in this regard.
I've been trying to figure out FMS for about a week now. Because of company firewalls, all traffic must go through either port 80 or 443 (I configured this in FMS.ini). I also created a self-signed SSL certificate and configured the adaptor.xml file to use it. Nevertheless, here are the problems I am experiencing: For RTMPT & RTMPTE, I can't start more than 9 connections. Beforing configuring FMS to also use port 443, I could only get about 4 connections. Now I would like to say that I testing this between only two computers, the FMS server with apache web server and a client.why it will not at least start 10 connections which I know is the limit for the dev version? Also, when using RTMPS I can only start 1 connection. Why is that?
View 4 RepliesI have an *.flv file on a FMS. When I play it on the client side the video plays just fine, but when I call Stream.play(filename, 0, -1, false) on the server side the video turns out really choppy.I both cases I use NetConnection to connect to an rtmp and NetStream to play the stream, but in one case I connect to a stream and request the server to play my file on that stream. Apparently that doesn't work with files? It works just fine for live streams.
View 20 RepliesMy application is samaatvlive in which right side video list when user click on specific video then first play ad then flv video. It is custom player.
View 1 Repliesis it possible to play recorded video file which is stored in another room(instance)? for example, I have file "video.flv" on the server at "/streams/room1" if user is connected to room2, can he ask flash media server to play "video.flv" from the room1; something like this, client side:
var ns:NetStream = new NetStream(nc);
ns.play("../room1/video", 0);
I use Flash Media Server 4 and Flash Media Live Encoder 3.2 for a strem rtmp.
I set FMS url to rtmp:localhost/livepkgr and I set stream name to :livestream.m3u8
I started FMS and I'd want to play my stream in a HTML5 video tag.
I have not changed FMS4 parameter, and I'd want to insert the src attribute in video tag.
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI'm trying to get Flex Builder 3 to play a live video stream with Flash Media Server and Flash Live Media Encoder.
I'm able to stream pre-recrorded (vod) flvs in flex from flash media server.
I'm able to stream live video using Flash/FMS/Flas Live Media Encoder, but not with Flex.
This code streams pre-recorded Video on Demand flvs, but not live streams:
If I change source to "rtmp://localhost/live/livesream.flv, I get nothing.
<?xml version="1.0"?><!-- controlsvideodisplayVideoDisplayFMS.mxml --><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:HBox> <mx:Label text="RTMP FMS 2.0"/> <mx:VideoDisplay autoBandWidthDetection="false" source="rtmp://localhost/vod/Legend.flv"/> </mx:HBox></mx:Application>
I want to take a long video and only play a specific segment of it, based on user selection. Can this be done with FMIS?
View 2 Repliesstart a video playing from a precise point in time?Using rtmp protocol to stream a video:rtmp:\my-servervodmy-video.mp4is it possible to use a similar form, as the following:rtmp:\my-servervodmy-video.mp4 =00:20:21to start video file from that point?
View 13 Repliesis it possible to play video stream from non-adobe(or homebrew server), in the newest flash player(10).It looks like the VideoPlayer only plays the stream from FMS? Is it the business model of Adobe?
View 2 Repliesthe question is,a client which can use "rtmfp" to connect to a FMS server,and the connecting success,Whether Can not guarantee that the client can play the Multicast video? because the client may be behind a Special firewall So he may connect to the FMS server ,but can not use P2P to connect to the members those are in the group?
If the answer is "yes",Whether i should make a check function that make these client back to "RTMP"?
Same file streamed from FMS4 (same on 3.5) with rtmp protocol has very poor quality compared to real file quality. Is there some low level configuration to do on Flash Server? Is the streaming server making some kind of transcoding before sending the stream? Or it can be Flash Player? Tried unchecking "hardware acceleration" but nothing changes. I am on a local gigabit network, so no network bottlenecks. Video seems very pixelated on the edges (not soft/antialiased). These are the file details:
[CODE]....
if I repeat this IIS topic, I couldn't find the answer to my problem any where on the internet. I installed FMS Dev 3.5 on Win 2003 Server with IIS 6.0 enabled. I don't have any issue with port 80 Listening, I used the IP address 192.168.0.21 for my web application (IIS) and 192.168.0.22 for FMS (I only have one network card and port 1935 is open under firewall). I can play the sample videos (RTMP, HTTP, and Dynamic Stream) using the Flash Media Start Screen (or from the location C: Program FilesAdobe Flash Media Server 3.5webrootindex.html) without any problem.
I then modified the IIS Default Website to look at the "webroot" folder (C: Program FilesAdobe Flash Media Server 3.5webroot). From IE, I can access the default web site by enter http://192.168.0.21/index.html. The website loads up correctly, and the RTMP video is playing perfectly. However, if I click Play Video (HTTP) or Dynamic Stream (tab), I receive "Connection Error. Please press Play to try again." I look at the log file (access.01.log) and see the error log "Session disconnect
[Code]...
I'm trying to record video from the users webcam and play it back at a later date.
I call
[Code]...
However, when I look at the FMS Admin Console at the streams in app/_definst_, their types are either "NetStream" or "Live". If they were being saved wouldn't they say "Stored"? After I close the application doing the recording, the "NetStream" type stream disappears, and after a while all the "Live" typed streams are gone too. Nothing is saved.
I have no idea what is happening. I don't know if it's a problem with my AS3 code not closing the recording properly or if I'm doing something else wrong, or maybe somethgin isn't right in the FMS?
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replieswhen i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI'm using OSMF v.95 to handle my video playback. When my streaming videos finish, the following error is triggered:"NetStream.Play.StreamNotFound"I want to be able to re-play the videoor scrub back, but the stream is unusable after that error.I've tested against a few different streams - here is one:
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 Replieswhat will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 RepliesAs titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesHow i can connect to FluorineFx RTMPT server? And how can i configure FluorineFx RTMPT server? Can i start FluorineFx RTMPT server without IIS installed?
View 1 RepliesI want to have a website where users can record short video clips (using a webcam) and then have those videos saved on the FMS for viewing later. I've seen a lot about streaming video, but I actually want to save the video.
View 1 RepliesI got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.