Media Server :: Check Who Is Watching Stream?
Nov 15, 2011how can I find that on server side which user is watching a stream
View 2 Replies
Similar Posts:
Media Server :: Record A Live Stream At The Other Side When Watching?
Nov 28, 2010It's natural for users to find something interesting and record it when subscribing to a live video,
but so far I can only record it when publishing,
Media Server :: Why Does Audio Stop After Minute When Watching A Live Stream
Apr 6, 2009HI installed flash media server 3.0.4 on a Windows 2003 server.I am using the default LIVE application and broadcasting to it using FME version 3.0 Inside FME I choose MP3 as the audio codec, stereo and 128kbps When I watch the stream everything works fine but after a minute (sometimes 2 minutes) the sound disappears and I can only see the video run.If I refresh the page that contains the SWF that plays the stream then the sound works again but then again after a minute the sound stops and only the video continues to play. It is important to say that this only happens when I play a live stream from a server that is located outside of my local LAN. If I play a stream from my development FMS server in my local LAN this problem doesn't happen using the same SWF and same settings in FME.Moreover, if I use the nellymoser audio codec then everything works fine and this problem doesn't happen also. The thing is that I want to broadcast a live event and it is very important that the audio sounds good (stereo and 192kbps) and if I use the nellymoser codec the results aren't that good.
View 5 RepliesMedia Server :: Check The Bandwidth Of A Client ( Server Sided ) And Redirecting Him To The Right Video Stream?
Apr 7, 2010i am currently playing around with a flash media server trial in combination with the flowplayer.All in all i am testing the performance and general functionality for the company i work for.Anyways, i am trying to search a way to check the bandwidth of a client ( server sided ) and redirecting him to the right video stream.Sure this could be done by the backend flash application, but its out intention to perform this check server sided.
View 4 RepliesMedia Server :: Start Streaming Only When People Are Watching?
Aug 26, 2009I've got a page laid out that houses a nightly live webstream of music at a venue. Every night (except Sunday) the stream turns on from 8pm-2am Eastern Standard Time. Some nights, I notice there is nobody watching the stream, yet the stream plays everyday no matter what. In the interest of saving bandwidth per month, I'm trying to figure out how to only stream if somebody is watching.So basically the camera would be recording locally, and when someone connects to the website something tells the server to start broadcasting. If the person leaves, the server stops broadcasting. Has anyone ever tried doing this? I'm using Influxis for my media streaming and they've assured me I can execute server side scripts.
View 12 RepliesMedia Server :: Embed Timecode When Publishing Live Video And Render It When Watching?
Oct 4, 2010I've managed to publish video now: ns.attachAudio (mic);ns.attachCamera (cam);ns.publish ("name","record"); But without time information.
View 22 RepliesMedia Server :: Secure Flash Media Streaming Server 3.5 (live Stream Connection)
Aug 23, 2010I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesMedia Server :: Stream Video With Flash Media Live Encoder To The Server?
Jul 19, 2011when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesMedia Server :: Security Check Determined That I Need To Patch Our Adobe Flash Media Server?
Jul 6, 2010Apply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesMedia Server :: Close Another Live Stream B If Opening When Stream A Is Closed?
Aug 28, 2010close another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesMedia Server :: Recording RTMFP P2P Stream By Sending Simultaneous Stream To FMS
Oct 8, 2010Only just getting started on this whole domain of learning, so go easy!If I set up a P2P video/audio chat (similar to the sample VideoPhone thing on the Cirrus site), can I get the stream from both parties to send to a server at the same time so that I can record it? If so, would I have to use a FMS to stream it to and perform the recording (and if so which version could I get away with)? Are there any (preferably free, or just tutorialised) solutions for the recording side of things?
Currently it seems like the only option for doing the P2P thing is to use Stratus/Cirrus unless I use FMS4 Enterprise.
how effective this kind of situation can be, in terms of quality of the stream and recording? Does any of this make sense?
Media Server :: Write Access Denied For Stream Error When Recording Audio Stream
Jul 26, 2010I've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
Media Server :: RTMFP Multicast Stream Has Exceeded Max Duration Allowed Closing Stream?
May 9, 2011i test the fms 4 update 1 rtmfp streams multicast after 10 minutes i get this message RTMFP Multicast stream has exceeded max duration allowed; closing stream. but i do not use IP multicast
[Code]...
Media Server :: Dynamic Live Stream Don't Take The Best Stream For Bandwith
Mar 9, 2010I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
Media Server :: Access Log- Stream Play & Stream Stop?
May 24, 2010I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 RepliesMedia Server :: Last Few Seconds Of Stream Cut Off When Recording A Live Stream?
Aug 27, 2010I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
Media Server :: Stream A HDS Live Multi-bit Stream?
Dec 12, 2011I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
Media Server :: Check Which Version Of Flash Media Server Is Installed On?
Mar 8, 2010Is there any way to check which version of flash media server is installed on my computer?
View 5 RepliesMedia Server :: Can't Stream From Live Encoder To Media Server
Nov 14, 2011I'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
Media Server :: Can Re-stream A Stream From Wowza To Fms 4.5
Dec 11, 2011Can I re-stream a stream from wowza to fms 4.5?I have a wowza stream with the url similiar to URL... Is it possible to restream this to fms 4.5?
View 3 RepliesMedia Server :: Swf Hosted On One Server Connect To Live Stream From Another Server?
Apr 28, 2010One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesMedia Server :: Setup Stream Encoder>>Flash Media Server>>Flash Player Client?
Jan 2, 2011I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesMedia Server :: Restrict Incoming Stream From Flash Media Live Encoder
Aug 19, 2011Has there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
Media Server :: 'URL Missing From Media Tag' On FMS4.5 HTTP Live Stream Playback?
Mar 30, 2012'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
Flash :: Get Number Of Users Watching A Stream?
Jan 10, 2012I'm using a regular flash video player to play rtmp streams hosted on a cdn. Does anyone know if it is possible to get a count of the number of users watching a stream, through actionscript or flash?
View 1 RepliesMedia Server :: FLV Does Not Stream Properly With Flash Media Streaming 3.5?
Sep 30, 2010What would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
Media Server :: Use A Live Stream From Windows Media Services?
Nov 14, 2011Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 RepliesMedia Server :: Stream Data Instead Of Media Files?
Nov 29, 2009Is there a way to stream data instead of media files? In particular I'm interested to stream swf files that will be dinamically loaded by another swf client. I see this interesting message talking about how to do this on Wowza but I prefer to find a solution also in FMS to use the SWF Verification feature.
View 1 RepliesMedia Server :: Videos Only Stream From The Media Folder?
Apr 5, 2010I have FLV files streaming fine from the media folder in the applications folder.I want to split up the videos into folders to make them more manageable.If I create another folder in the applications folder at the same level as the media folder and put a video in there the video does not play.
View 4 RepliesMedia Server :: Stream.play On Server Side Makes Video Choppy?
Apr 30, 2010I have an *.flv file on a FMS. When I play it on the client side the video plays just fine, but when I call Stream.play(filename, 0, -1, false) on the server side the video turns out really choppy.I both cases I use NetConnection to connect to an rtmp and NetStream to play the stream, but in one case I connect to a stream and request the server to play my file on that stream. Apparently that doesn't work with files? It works just fine for live streams.
View 20 Replies