I have converted the F4V to a single moof atom file and it now plays in Media Player and I can create a SWF player to play the video file but my question is, how do I convert the F4V single moof atom file into a FLV? Media Encoder will not except it
View 1 RepliesI watched two videos by Jody Bleyle:
1. [URL]
2. [URL]
In Video 1, she shows how to stream a single file. I've done everything to the letter on this video, however, when she uses the videoplayer to reference the livestream.f4m file, there is none. I've actually checked the folder location(apploications/livepkgr/streams/_definst_/livestream and there are files in there (.f4f and .f4x), but no .f4m which is the file she references in the video player.
In Video 2, she shows how to create a multi-bitrate video stream. Using the manifest packager and creating a .f4m and .m3u8 package and placing it in the webroot folder. Here is the contents of my liveevent.f4m file:
[Code]...
I made a flash effect for my friend's site and he won't let me get the flash back after a fight. I can see the effect on the homepage of his website. Is there any way I can get the flash to an fla file on my computer? Is there any way I can find the swf file on his websites system and convert it to an fla?
View 2 RepliesI can convert .mov to a Flash file, but I can't even get an .mpg file to open.
Is there anyways I can convert this using Flah CS3 or any freeware that exist out there?
Is it possible to allocate multiple media locations to a single VOD application? I'm about to exceed the 2TB volume limitation of my SAN, yet the quantity of content that needs to be available for a given clients FMS application exceeds that.
View 1 RepliesIf I'm streaming live video and chatting in an FMS app, should each component have its own instance of NetConnection or should they share one? Was thinking perhaps the quality of the live video stream would be hurt in a sharing situation but am not sure the architecture works like that.
From a development standpoint, I'd like to make one NetConnection instance in my main application file and connect with it. Then, when successfully connected, I'd like to pass that connection into any custom components that need it.
I have 3 seperate .swf on a single html page which are all communicating with FMS on separate connections. Do you think there will be any stability issues? or connection issues. All the .swf use the same main.asc. There are no apparant problems so far just need an expert opnion.....a side note is I've also noticed an error in the error logs that says its detected a backwards time stamp when recodring. Whats that all about? The application seems fine. Using FMS 3.0
View 2 Repliescan i use a single RTMP link included on FMLE with multiple servers, means, that RTMP link will do the redirection to the other RTMP links.with hight number of simultanous users, that feature will manage the use of servers
View 7 RepliesI have a case where I'm displaying 3 videos simultaneously using FMIS 3.5. When one is selected it will play the other two will switch and show a videoloop.
What is the proper way to accomlishing this. I actually have 6 videos (3 loops and 3 videos). Do I need a netconnection/netstream/video object for all of them or can they share something. What is the best practice?
I've been trying to figure out FMS for about a week now. Because of company firewalls, all traffic must go through either port 80 or 443 (I configured this in FMS.ini). I also created a self-signed SSL certificate and configured the adaptor.xml file to use it. Nevertheless, here are the problems I am experiencing: For RTMPT & RTMPTE, I can't start more than 9 connections. Beforing configuring FMS to also use port 443, I could only get about 4 connections. Now I would like to say that I testing this between only two computers, the FMS server with apache web server and a client.why it will not at least start 10 connections which I know is the limit for the dev version? Also, when using RTMPS I can only start 1 connection. Why is that?
View 4 RepliesCan anybody tell me how to and which way is the best for converting .flv files to .swf files?
View 1 RepliesI need to merge multiple live audio streams into a single stream so that i can pass this stream as input to VOIP through a softphone.For this i tried the following approach:Created a new stream (str1) on FMS onAppStart and recorded the live streams (sent throgh microphone) in that new stream.
Below is the code :
application.onAppStart = function()
{
[code].....
I am using Flash Media server 4.5 and i read the tutorial if i want to stream the live feed, i may need to use the media live encoder.
but what i found in media encoder is i have to manually setup everything and it only support camera devices. But in my case i have multiple video files keep received from another program and place it on file system (server),my goal is use the Flash Media server to perform a live boardcasting with these video file one by one. That means when client watching a live streaming, they will not notice the server is playing mov1, then mov2, then mov3, then mov4... and so on.
You can imagine i am trying to boardcast a live footage say for 60sec, but the video file will not recorded entirely after 60sec, instead for every 10sec i will save a new video file, so that when client watching the live by HLS [URL]when the time reach to 10sec, a mov1 video file available and FMS should boardcast this video on live123.when the time reach to 20sec, a mov2 video file available and FMS should Immediately follow the mov1 boardcast on live123.and so on...Also can FMS dynamically create a new streaming session (invoke by code), so that when client A uploading some video files to the server, the FMS open a new streaming session only stream cilent A video files?the configuration to boardcasting like screen size, bit rate, etc should be pre-defined on the server. [URL]
Does the FMS 4 will convert the data from Speex to Nellymoser ?I am publishing the stream to FMS 4 with codec Speex from flash player 10. And trying to access the stream in flash player 9. I am not able to listen the stream.
View 1 RepliesFor the past while, my developer has been working with me on a small project to put together a live interactive whiteboard app, powered by Flash Media Interactive Server. Well, everything is finished & ready to go, but there seems to be a big problem:
The app was developed & tested on a windows machine, while my server and all my website files (to integrate with) is on a Linux system.
It's been a month since this problem arrose, and there had not been any further progress with this project for the time. My developer doesn't seem to know much about how the 'conversion process' works, if there is one.
Do you know if this is possible (to convert a windows-programmed app to work on a linux system)? If so, do you know roughly how it should be handled?
I use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesDoes anyone knows if it's possible to write some bytes received from an AIR or Flex client in a server side file using the File class ? I have been trying for hours without any result.My goal is to store on the server side a swf file sended by a client in a ByateArray.Here is the code I have ended with, assuming that myfile.swf alreadey exists on the server prior to the code execution, and is at the right place, and that pBytes is a ByteArray received from the client which contains a swf file :
function writeFile( pBytes )
{
var myFile = new File( "myFile.swf" );
[code]........
I'm doing a test install before we update our old server to 4.03.I've got the server software installed and configured (4.03 server, using iis for web).All the test stuff on the sample index page works, except for the dynamic stream tab.I've eyeballed the .f4m file, and tried putting in a complete url to the samples...but no luck.i just keep getting the stock connection timed out message.
Where do i need to look to start confiriming where this issue may be coming from?I've made made sure I can reach all the test videos by making flash players for them, calling them via rtmp... no problems.It's got to be something dumb with either the f4m file, or the way it's being served (btw, i have added all the mime types to iis , including .f4m as video/mp4....which is one of two ways I've seen it added).
Im picking up a dedicated server it will be CentOS and be well above the minimum req for FMS 3.5 Interactive.
Question: I want to use my dedicated server for more then just the FMS. Is this possible? Basically I want to use the same server for FMS and for the file hosting of my site. Obviously I would give it a different IP but am not sure what I will need to do specifically
Can I convert a Flash file to Quicktime or Windows Media Player? If so....how? (Also, is swf the only file format on Flash?) I've been reading I need to download some converter to do this.
View 5 RepliesGot a really big problem here. I keep on getting "NetConnection.Connect.Failed" when I load a .asc file on my main.asc file, i use the method load() in my code. I really don't understand why this happens, but when i comment out the code that loads the asc file, I can successfully connect to fms. I can't figure out what's happening here. Btw, i'm using fms4 in windows 7 32bit.
View 6 RepliesI've looked through the scripts in the scripts/ directory, but haven't seen anything obvious.
I would like to be able to specify the file name to capture the stream to. At present, the capture file is always named the same as the stream, which means if I stream for a bit, stop, then restart, the originally captured file gets overwritten. I'd like to be able to incorporate something, i.e. the stream start time, into the capture file name.
I do understand the differance between ssas and as3. Not all, but all most everything I see written in SSAS can be writen into a external AS3 file. This leads me to quite a few questions I'm hoping you kind people can shed some light on for me.
1) What is the advantage of writing a SSAS file over an external AS3 file?
2) Can I write an .asc file in AS3 or do I have to use AS1? Please understand I'm using tuts from fmsguru.com and the books "Learning Flash Media Server" (pdf) and "Programming Flash Communication Server". I'm not a javascript programmer so nothing I do in AS1 seems to make any sence while everything I do in AS3 does. It may not seem like it to you people that are programmers, but to those of us that aren't, AS1 and AS3 are miles apart.
3) kind of off topic, but a security question. I'm not a "hacker" and don't like the jerks that are. My question is on external AS / SSAS files and swf files. When my fla is compiled into a swf does my external AS files remain external? I assume they do, but then what is the threat of the swf being decompiled? In most projects I would do I could care less if somebody had access to my fla as long as they don't have my actionscript files.
I don't know. Maybe on questions one and two I'm getting confused becasue I'm using out dated material. Again I assume that even though fms was built off of the javascript engine it should be able to read and execute my AS3 file. Other wise what was the point of the evolution of actionscript into a fully functional programming language?
I am looking for libraries or solutions to convert a Microsoft PowerPoint file into a playable Flash file. The constraints are that I must be able to do this from Java, a webapp, that is running on a Linux-based server. I have been scouring Google and have only come up with two options: iSpring SDK -[URL] Option #1 is looking like it will be cost prohibitive based on initial conversations with the vendor (i.e. no price listed on web site). Option #2 seems non-ideal as it will require installing additional dependencies of OpenOffice and X11. This seems like too much overhead for what should be an inline solution.
Everything else I could find was either written only for Microsoft .NET or was just a PowerPoint plugin exporter. Any other solutions out there that are being buried by Google SEO? Can someone, maybe, convince me that the overhead of Option #2 really ain't that bad?
Update: I should clarify that I'm not opposed to reliance on a native library as long as it will compile on CentOS or, preferably, has a yum package available. I should, also, clarify, that I'm not opposed to a "for pay" option within realms of reasonable.
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 Replies