After 5-10 minutes of use my application disconnnects all users....does anybody know some general causes of this or how do i fix it...........in the server logs i get code 600 normal disconnect.
View 1 Replieswhen I'm streaming in live :a. FMLE is disconnect for couple seconds (10 -30), stop encoding and then renew the connection and the encodingb. In the same time, I can see users (streams) are disconnecting/ disappear from the console.As said it can happen once in a session, but this disconnect most of the users and they have to refresh their browserto get the live session again.Currently I'm using FMSS 3.5.4 r210, Linux redhat 5.2,6 Intel(R) Xeon(R) CPU 16GB.I found a post named "FMS disconnect from FME" (Jun 7, 2010 3:36 PM by BJWP Ltd)
View 2 RepliesWe are new to FMS and have just deployed a FMS 3.5 for a live streaming project.but I seem to be getting a bit of an issue where the FMLE seems to disconnect and reconect to the FMS several times.but some times the FMLE seems not to be able to reconect back to the FMS. I read somewhere that this bug have been fixed with the FMS version 3.5.3 updater.also I can see the client still connected afoter they drop connection on the admin console.I dont mind setting up the updater but just want to be sure this would fix the problem as I have live web TV on the FMS.Also is there a way to update without loosing all the config? FMS running on Windows 2008 server R2,4mbDual Zeon CPU
View 5 RepliesI have an fms app which won't disconnect people in IE unless they close the browser completely. Simply going to another url in the browser leaves their name in the peoplelist. I've tried everything here without success. Even IE 8 shows same problem on Vista. IE on XP works fine as well as some versions of IE on Vista.Firefox, opera, chrome all work fine everytime.The problem, it seems, is IE won't "leave" pages until it's closed no matter what.
View 3 RepliesWhen a user refreshes the page in IE9, the disconnect handler isn't called. So in an application like a fms lobby, a user seems to stay in the list when he actually isn't there anymore.
View 2 RepliesI am using FMIS 3.5.3 (Linux) to fork an RTMP stream from FMS to two different CDNs. My FMS application does roughly the following:1) Client.prototype.FCPublish() creates two NetConnections, one for each CDN2) Each NetConnection's onStatus() creates a new NetStream object if info.code == 'NetConnection.Connection.Success'3) The stream that's supplied to FCPublish() is attached to each NetStream4) .publish(stream.name, "live") is run on eac
View 5 RepliesURL...I am running application instance that implements publisher/subscriber on video streams. Application code is very thin and can be removed completetly if required. In a specific time, randomly, disconnect messages stopped happening which causes the folowing:
1. Streaming service shows decrease of bw per second
2. Users count is increasing linearly.
3. No disconnect messages apears on access.0x.log
When streaming a live event through FMS 3.5, is there a list of guidelines or best practices to handle the situation when the stream disconnects and should reconnect.Basically, what I do now is wait 20 seconds after the initial disconnect, then close the stream and ask the user to ty to reconnect to the stream again.
View 3 Replieshow to clear the client entry from Adobe flash Media server 3.5. when net disconnect.i was expecting that on netdisconnect from the client side end(which is connected to FMS) its onDisconnect event fire similarly as it fire for browser close.But when internetdisconnect ondisconnect event not fires at FMS side is there any way to overcome this or any other event fire at that stage?
View 6 RepliesI have a problem on streaming my files with the FMS 4. There are several testfiles on my VOD-directory, most of them with a length about 2 minutes. Altough there are some with 12 minutes. So if i want to play all those files with the StrobeMediaPlayer, only the files with a 12 minutes length are working, on the others the player ist sayin "We are unable to connect to the content you´ve requested. We apologize for the inconveniece.".ind any option or notice where it says there is a minimum lenght to stream... so whats going wrong here?Additional Infos:FLV, MP4H.264 + AAC
View 1 RepliesWe are testing IP Multicast, with Flahs media player 4.0. We set up the encoder and generated the manifest file. Multicast start, but we see lot of bufferring and video running fast. After about 2 minutes, the encode stops publishing to the server. We are using digital rapids as the encoder.
View 3 RepliesI bought Adobe Flash Media Streaming Server 3.5 and I have problems with large video.After 70 minutes, the video stops playing.
View 8 RepliesAm publishing a live stream from server to server per:I noticed that about every 10 minutes or so the stream would seem to go down.n instance there is unloaded every 10 minutes like clockwork. Message reads "Instance _definst_ is shutdown by the script... Unloaded application instance _definst_." This is preceeded by the"NetConnection.Connect.IdleTimeOut" message.During the 10 minutes inbetween, the stream displays fine on the viewer.The live docs say this message means "the publisher of the stream is idle and not transmitting data
View 6 RepliesI originally posted this question on Flash Player forum but I've got a feeling it needs configuring at the server end, so I thought I'd ask you more technical guys.
When viewing streamed videos on a guitar tutorial website, if I pause for 5 minutes or more (to practice) I can't continue playing the video. When I click play it says 'loading' but just stays like that continually, or until the window is refreshed. The site uses real time streaming, not progressive downloading.
So I guess the connections timed out and been dropped after 5 minutes of inactivity, is this right? If so, has it been dropped by the server or by the player? Can it be configured at either end to stop this, or to lengthen the time before it happens?
I am using BlazeDS. Does anybody know how to disconnect client from server? Client must be informed about this event.
View 1 RepliesI got a mxml file that launch a script on my http server through a HTTPService.send() call. Since the script on the server side takes a LOOOONG time (it could take even more than a hour) i would like to drop the connection between my air application and server when a button is clicked. Don't know why but calling HTTPService.disconnect() is totally useless... No tcp connection drops and script keeps on running on server side. No HTTPService.cancel() nor set HTTPService var to null worked.
View 1 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.