In frame one of "Scene 1" i have a movie clip that acts as a scrolling image banner, scene 1 is only 1 frame long and there is no scene 2 yet, or any other frames, But, when i preview, or publish, the scrolling image movie clip disappears, for like, no reason. theres no actionscript in any of the frames at all so that wouldnt be causing it somehow.
View 1 Replies
Ive made a movie that add strings from several input text fields to an array. This array is sent from the flash video to php. This is working fine when I preview the movie as Flash. The php script prints the variables as intended.
But when I preview it as html the arrays are all empty...
[AS]
on (release) {
number_of_attr1 = main._currentframe + 1;
suggestions1 = new Array();
[Code].....
I am using Adobe Flash CS3 and press CTRL + Enter to preview the movie , but now I Cann't do it , the movie isn't display anything ( but I can preview only one scene by press CTRL + ALT + Enter). I try to publish the movie, the error message is not display but when I test debug . Flash shows the message that "Error open file 'my flash file path'+.swf" How can I reslove this problem
View 2 RepliesCheck it out. I am creating an XML gallery. I am able to load in the gallery info from the XML just fine. The preloader works just fine. And I can set my _x and my _y just fine. BUT.... when I attempt to set my movie clip (that acts as the pic holder) to a width or height, the MC never shows up!
[Code]..
I have a movie clip on stage which length is 600 frames. I put a actionscript 3 code "stop();)" at the end of movie. it stops when it reaches to 600 frames but it disappears from the stage as well. Which I don't want. It should stop animating but stay with last fram which has a welcome message.
View 1 RepliesI am creating an XML gallery. I am able to load in the gallery info from the XML just fine. The preloader works just fine. And I can set my _x and my _y just fine.
BUT.... when I attempt to set my movie clip (that acts as the pic holder) to a width or height, the MC never shows up!
ActionScript Code:
function firstImage() {
if (loaded == filesize) {
picture._alpha = 0;
[Code].....
i have a mc on the main stage that loads the photos in.
i do not want the cursor to be seen when users mouse is over the photos.
So I'm making a game and I want the background to be blurred. I did that, and I see it blurred, but when testing the movie in SWF form, there's no blur effect on it... this never happened before.
The only thing I can possibly think of is that the background, along with everything else, is programmed to move when you press the arrow keys... could filters possibly just be removed if you program it to move?? I'm using Flash 8 with AS2.
I'm having a problem with component live previews. If I just create a movie clip and set the live preview, all instances of the clip i put on stage update separatly from each other (their live preview that is). As soon as I change the clip to a component (export .swc or compiled clip) all the instances update together. eg if i set the component parameter 'title' - all titles of the all the instances on the stage will change. This didn't happen when it was just a movieclip - all instances changed separatly as i set them.
View 1 RepliesI have a movie clip symbol that is about 8 frames long. I am staggering it 14 times throughout scene one, with varying times.My problem is that it plays once then disappears (I added actionscript on the last frame in the symbol movie clip). I would like it to play then keep the last frame displayed in scene one until a specific keyframe (60). Not have the movie clip instance loop, rather show the image that is on its last frame.
View 9 RepliesFundamentally my code seems to work on preview but when I actually publish nothing appears.Here's the code in full:
Code:
stop();
#include "as/tween.as"
[code].....
I am using a FLVPlayback to play a video on my project. Path to the video file is taken from xml file and loaded to FLVPlayback by action script, everything work properly in swf file.But when i publish this file and play as html, the movie never start. What can be wrong?
View 2 RepliesMy project won't allow me to preview or publish it anymore. It's about 10 megs and the swf was around 2 the last time I could check. It goes to the export/publish panel and the bar fills but then nothing. The application does not crash either and I can continue to work in it.
Other smaller files preview fine.
I could debug this? It's driving me crazy and I really can't afford to lose this project.
I am working on Flash CS5 Professional. I have created a simple fla file but not able to Publish->preview the swf file in Google Chrome. When I click on Publish Preview it opens a new browser window but nothing happens.
View 6 RepliesIve made a movie that add strings from several input text fields to an array. This array is sent from the flash video to php.[code]...
View 1 RepliesI have a flash document with only 1 scene, but several frames. On the first frame i have several buttons, their behavior is "button". I wrote a simple onRollover command on each one. Like this
on(rollOver){
gotoAndStop(2)
}
It works fine when I test the movie, however, when I publish it, nothing happens when I rollover the button. I suppose there is a simple answer to this, but i just can't find it
I was wondering if it is possible to get my iphone app to preview in landscape mode without having to manually rotate it. I have it set to landscape mode with the landscape stage size, but it launches the preview in portrait mode.
View 4 Repliesi made a simple nav bar with a dropdown menu it works fine in flash mode and preview but when i try to embed into html it only show the nav bar but not the dropdown menu.
View 4 RepliesWhen I'm in design mode in Flash Pro, I can selectively hide layers. However, whenever I run the movie for testing the hidden layer inevitably shows up. Frustrating, as I want to be able to test several different layers and not have them all appear.
View 2 RepliesI am writing to a text file via FileStream, and it writes just fine when I do a publish preview (control + Enter), but when I publish it as a projector and run the exe, it does not work.
My publish settings are set to
Player: Adobe AIR 1.5
Script: ActionScript 3.0
When page is loaded I can scroll it with mouse, But when I load first external movie clip the mouse scrolling function disappears. Is there anything I can do? I have search in flash mx 2004, and tryed to use // Mouse.onMouseWheel but nothing
View 14 Replieswhen I leave a window with flash content, in this case, a scrolling movie clip with buttons inside set to hyperlink popups (only 1 hyperlink is set so far): [URL] the flash content will disappear. So if I go back to the window, I have to reload the page to get the flash to appear again. Same thing happens if I minimize the window, when I bring it back up, no flash, and I have to reload the page. The menubar with the boxes at the top is flash as well (different swf) and that doesn't have this problem.
View 2 Repliesi'm trying to load some external images of the web.when i publish preview my swf the image loads.but when i open the swf or html the image doesnt apear.i have tested every thing and found out Code:e.target.contentdoesn't exist in the published version.PS: i have set the local playback security to 'network' my code:
Code:
function loadImage(imageString:String)
{
[code].....
I've been working on a AS3 script to control my FLVplayback component. I'm very close to making this work. Let me describe what I want to happen.On my homepage I have a DIV container where my video will be located. I want a still image of the video to load with a play button over it.Upon mouse over I want the button to change colors, upon mouse click I want the video to play.I have a .FLA project I'm working. I've got a FLVplayback component, sourced to my .flv. I've created a button and it works. When you click it the video plays.I have 3 layers.
actions (this is the top layer)
buttons (has a button and progress bar)
assets (only the FLVplayer)
The following AS3 is set to frame1 in the actions layer.
I'm using FlashCS4, AS3 and DreamweaverCS4
Here is the weird issue.
#1. While working in Flash.If I do a publish preview the play button with load for a split second and then disappear to be replaced by the still image.If you click on the center of the still image where the play button SHOULD be, the video will play.
#2.If I view this online.The play buttons NEVER disappear, however the still image NEVER loads.
import fl.video.*;
import flash.display.*;
import flash.events.Event;[code]............
How can I change the default publish preview player from HTML to Flash in Adobe Flash CS5.5??
View 1 RepliesI'm having some trouble with getURL (I think). It works fine when I preview with Flash's html preview but it's not working on my server. It's pretty simple. [URL].selected1 is a user-defined variable pointing to a page: ie, when the user selects variable page1 the page to be opened is [URL]. Like I said, it works with Flash's preview, but not on my server(no 404 or any response). Does there seem to be a problem with my code or might I be overlooking a server error? Here's my code:
[Code]...
I have MC, Print is working,
1. I want give a view/Print preview in a separate window
2. I want save it a jpeg image
I have masked the video clip. The masked clip is working fine. But the Actionscript 3, which contains 2 more SWF external movie clips not loading those files. Once I remove the mask they start working.
View 9 RepliesMy searches have led me into some overcomplicated solutions. I'm using Flash to create a simple .swf that contains a movie with subtitles. I'm sure there are better ways but this is the easiest and I have been too long gone from developing in Flash and uBer rusty.
I used the movie importer, added captions exported my movie. All works great. The movie is set to NOT auto-play though and fades in from black so when the user first sees it they just see the skin and a black box. What I would like to do is have a preview image appear instead of the black first frame until the user plays the movie.
I have a brand new Mac Pro (8-core "nehalem") and I'm having a very frustrating problem. While testing a movie within Flash, the Test Movie window will randomly go completely blank, showing the Stage color. The movie is still running, there's no error, it's just blank. When I resize the Test Movie window, everything reappears. Until a few seconds later, it snaps back to blank.I resize, it reappears, it disappears,I resize,it reappears, it disappears... over and over. Today is my first day really using this machine for Flash. The FLA worked perfectly fine on my old Quad G5 and on my Intel iMac at home, so I don't think it's an issue with my file. The graphics card is an NVIDIA GeForce GT 120 with 512MB VRAM. (the standard card that comes in the 8-cores.)
View 1 Replies
