I have a few flvs made from After Effects that are now movieclip symbols that I have to use as buttons. My problem is that I want those movieclips to continuously play even without doing a mouse rollover. Then, when it's rollover, rollout, or click time, another animation will play within the movieclips that I'm going to use as a button.
View 3 Repliesi need to play two FLVs continuously one after the other - you might think it's an easy task, but every time i try to do that there is this annoying gap between the videos that flickers, and it's have to be seamless.the ON_COMPLETE event worked poorly, so im sampling the playheadTime of the first FLV and test it for it's end, minus a certain offset value.. but the lag is still there.i ever rewrote the FLVPlayback component to my own NetStream object extending, hoping it will take less run-time memory consuming but noting...and the thing is,the lag sometimes happens, and sometimes don't..when trying to sample the gap it brings me different values every time, but there is no way to correct it,because changing the playheadTime causing a random, few milliseconds lag itself, and we are back to square one..
View 3 RepliesI would like to have it added with controls and play while the user is browsing the site. I don't want it to start playing automatically I want the user to be aware there is a song for them to listen to. I don't have any images for buttons.
View 2 Replies[code]...
It can only allow me to play the songs once? How cn i modify it such that it can play it continuously?
I have a countdown timer and a click counter and I don't want for either of those to reset if the page were closed / refreshed. What I want is that once the timer and click counter start, nothing will interupt them. But the problem is that if i simply go to another page and back it resets everything. Here is my code...
[Code]....
I am playing a background on my webpage by using miniswfloopplayer, now I want the music to play continuously throughout the website, currently the music starts all over again when a page loads which is quite obvious. I am looking for a approach where I can avoid the above situation.
View 1 RepliesI have 2 sounds that i would like to play. Sound 1 and sound 2. I want to make sound 1 to play only once and after it stops i want to make sound2 to play continuously. You know what I mean? I have 2 different sounds, lets just say sound 1 says blah blah blah and blah and after it stops I want to play sound 2. My sound 1 is longer then sound 2 so I need to make sure that sound 1 finishes playing and after it stops then to make sound 2 to play.
View 1 RepliesHow can I play flv files continuously..?? I have developed code for playing flv files in my browser. Those flv files are streaming from flash media server. I can play files individually, but I want to add one button to play multiple flv file continuously when one button clicked. How can I play those multiple flv files continuously...??
View 1 Repliescode that will load and play a folder of flv's continuously?I have a folder of short clips i converted to flv. When one clip finishes, i want the next clip to play and to endlessly loop through the flvs, never stopping. If there's a way to include a transition, that'd be cool too, but not important. I've got the first clip loading, but can't get the next to play.
Code:
var video:Video = new Video();
addChild(video);
[code].....
I am a newbie at flash so this might be a trivial problem for the experts. I have a flash banner I wish to remove the replay link and display the flash continuously.
Preview link: [URL]
Src Link: [URL]
I'm a beginner level student. My project is to create a Splash Intro and a 4 page Website (Home page and 4 internal pages). I have to use Flash (no HTML, Java, CSS, etc). We are using Flash CS3 with Action Script 3. The Splash Intro should play continuously. This part I have working like a charm. However, the project requires a Skip Intro button. I have made the Skip intro button and gave the "instance" a name. The next part is where I'm stuck. I want to be able to click on the Skip Intro button and go to the first page of my "Website." I have all of my pages on one timeline. No movie clips. This is very basic.
My Home page has some animation on it. My name comes in from the left and three buttons come in from the right. When the user clicks on the Skip Intro button, I want it to go to the Home page, play the brief animation and STOP. I don't want the Skip Intro button to just go to frame 40 (for example) and just stop. And, if it goes to frame (50) for example and stops the user will miss the animation (right?). Here is what I have but it doesn't work:
[Code]...
I have 10 buttons on my homepage and I want to play the same movieclip when you click on a button and after that move to a specific frame for each different button.
Someone know an easy to make this without having to create 10 differents movieclips just to change the action at the end of the movieclip?
I am going out of my mind trying to get this to work. I can do it in AS2 without a hitch - but not AS3. I just need to load an external swf file into an empty movieclip. Then I have 2 buttons play and pause that need to be on the top layer of the new movie and they need to play and pause the loaded swf file. I have tried a number of things and nothing is working.
View 1 RepliesI am going out of my mind trying to get this to work. I can do it in AS2 without a hitch - but not AS3.I just need to load an external swf file into an empty movieclip. Then I have 2 buttons play and pause that need to be on the top layer of the new movie and they need to play and pause the loaded swf file.
View 3 RepliesI am going out of my mind trying to get this to work. I can do it in AS2 without a hitch - but not AS3.I just need to load an external swf file into an empty movieclip. Then I have 2 buttons play and pause that need to be on the top layer of the new movie and they need to play and pause the loaded swf file.
View 0 RepliesI have a movie clip on the main timeline. This movieclip has buttons that I want to play different frames in scene 1.
At the moment, this is the code I'm using in scene 1.
[Code]...
I'm getting the error below but have no idea what I should be doing.
[Code]...
I'm used to making tweens on the timeline, and by default, the mc loops continuously. Well now I'm making a tween strictly in AS, using the "mc_tween2.as" and "lmc_tween.as" libraries. How do I make my tweens play through, and then start over again immediately after they finish? I'm simply trying to have a cursor/marker continuously fade/blink from alpha 100 to alpha 20 using on(rollOver).
View 4 RepliesI have some code done but it could be all wrong as I am not the best coder at all, just starting out.
Here it is:
package classes
{
import flash.display.*;
import flash.events.*;
import flash.display.MovieClip;
[code]....
I'm creating a menu bar that is a movieclip and inside the movieclip consists of the buttons.Now the menu bar is twice as WIDE as what is visible on the stage.The only part you can see is the text 'menu' on a bar.Then when the mouse hits the bar, it flies across the screen to the otherside of the bar where the menu buttons are.Now the menu bar does its animation over 20 frames - the last frame being the frame where the menu buttons are now visible.
On the last frame i have the 'stop;' code
On the first frame I have this code:
Code:
stop();
this.onEnterFrame = function(){
if(rewind == true){
[code]....
Can a button play a movieclip if it lives within another movieclip? Let me explain: Buttons in a map key ran route animations on the map. Code for button (accessed by selecting button and F9) ..reads : on (release) { gotoAndPlay("BusRoute_375");}
[Code]...
All layers and consequently all route movieClips that relate to the map as well as the stop codes for the individual route animations now reside within that MovieClip which sits on a new layer above the map key layer. However, the key buttons no longer run the route animations. What should be done so that when clicked they still play the route MovieClips. Its like the button code cant see the layers it once refered to, now that they are in a movieclip.
Originally, the client wanted to control "hero_mc" using the keyboard but now they would like to control him with buttons only. Here is the original code on the "hero_mc" which works as expected:
[Code]...
I am trying to create an interactive graphic. Basically, it's three squares layered on top of each other, with a large square in back, a medium square centered in the middle of the large square, and a small square in front centered in the middle of the medium square.
When you roll over the medium square, say, it expands to almost the size of the large square and some text fades in, and the small square on top of it fades away. When you roll off of the medium square, it goes back to it's smaller size, and the small square fades back in.
Currently, I have the actionscript in the movieclip to make the medium square get larger and smaller (and the text fade in), but I need to somehow reference the instance of the small square movieclip to hide it when I roll over the medium movieclip.
My actionscript for the medium square activity, currently:
Code:
stop();
this.onEnterFrame = function(){
if(rewind == true){
[Code]....
how to have this rolling over action get rid of the small square and then bring it back on roll out.
My question is fairly simple, but I can't find a sollution. I have a button, and I want to play a movieclip inside a movieclip from the main stage. It is the 5th frame inside the movieclip 'page' from the movieclip 'book'. I have this, but it doesn't seem to work.
View 2 RepliesI was asking button to go to a movie clip on the main timeline that had a stop frame at the beggining. Flash won't do this because it doesn't recognise anything past a stop frame and used _parent instead of _root
code on the button:
on (release) {
_global.destination_detail = "first"
_parent._parent.gotoAndStop("content_mc");
}
And in the stop frame that's at the beginning of the movieclip that contans my content:
content_mc.gotoAndStop(_global.destination_detail) ;
stop();
So I've created a variable: destination_detail
I can't see how this isn't working:[code]The button with this funtion is nested within a movieclip on the main timeline.'content_mc' is the instance name of a movie clip on the main timeline that contains frame label "1". I want to play frame label one by clicking on this button.
View 8 RepliesI have a file that uses buttons to play a series of videos. I want to have the button for the currently playing video to stay in the 'down' state while it plays but I don't know how to do it.
View 4 RepliesIs there a way to import audio into Flash and use it in a way similar to a movie clip (give it an instance name and use a button to play it etc.)
View 3 RepliesI want to have two "play" and two "stop" buttons to control 2 different mp3 files within the same frame(page). One Play and one stop per mp3 file.
I use the code underneath that works just fine with one sound. But, how do I apply action script 3 to control the "play" and " stop" of the second Mp3 file. I tried creating new buttons with action script 3 in a new Movie clip but, I get a bunch of errors
var req:URLRequest = new URLRequest(Pounding.mp3;
var sound:Sound = new Sound(); var controller:SoundChannel;
function soundLoaded(event:Event):void { controller = sound.play();
[Code].....
I made a simple page with several buttons that play music, but then decided I wanted a video (flv) to first play automatically, and when that ends the page with the buttons appears. How can I do that? Right now I have four layers using one frame. Layer one has the AS code, two has the text, three has the buttons and the fourth layer has a background image.
View 7 RepliesI have buttons that i've created to play a movie clip.My movie has labels for different parts of the movie.
on_btn.addEventListener(MouseEvent.CLICK, turnOnTv);
function turnOnTv(event:MouseEvent):void{ gotoAndPlay (20);}
Do I have to put the name of the movie clip that should play?