Professional :: FLV_Playback Keeps Stalling?
Oct 2, 2011
I'm using flash cs4 Pro. I added an FLV_Playback component - (I then downloaded the newer FLV_Playback 2.5 component and got that installed properly) - and I attached a 3 1/2 minute music video that I have on my server.The video starts ok but then stalls after about 30-60 seconds; after a while it starts back up but then stalls again after a while.Do I need to do some specific buffering that isn't automatically handled by the flash IDE's FLV_Playback 2.5 component?
View 2 Replies
Similar Posts:
Aug 7, 2009
I have a move clip (video_mc) which contains the instance of flv_playBack with instance name test_video
i would like create a instance of the movieclip (video_mc) which presents in library as myVideo_mc dynamically
I attached the netstream to the flv_playBack but the video is not displaying but it is playing
Here I placing my code
ActionScript Code:
myVideo_mc=tLevel.attachMovie("video_mc","myVideo_mc",tLevel.getNextHighestDepth());
myVideo_mc._x=0;
[Code]....
View 1 Replies
Feb 23, 2012
I've worked out a great way to create a pixelized wipe effect, with movie clips of pixels nested in rows. I've created a loop that goes through each row, and then another loop inside that loop for the pixels in each row. I then use a random number between 1-0 for for the delay before it alpha-ups the pixel. I used Greensock for the tween and it works great. One problem, I can't stall the for loop for the rows, and every row comes up at once. Still, the pixels are staggered, and this is a nice effect, but I want it to move from left to right. So my code looks like this: (BTW, yes, AS3 does have setTimeout and it works fine)
function stripeWipeUp(stripe:MovieClip):void {
var total = stripe.numChildren;
for (var i:int = 0; i<total; i++) { // the rows
trace(i);
setTimeout(function() {
[Code] .....
What happens, with the setTimeout in there, is that the "i" for loop hits every row (there are 27) before one setTimeout gets finished. So, it doesn't work as it should - the next loop should not execute until the setTimeout is finished. How to accomplish this so each row gets stalled by about 500 ms?
View 4 Replies
Apr 23, 2010
the following actionscript is for a simple preloader for a movie i'm working on. It works fine in Firefox but the movie stops on the first frame of the preloader when opened with Internet Explorer. Has anyone had this problem before?
stop();
addEventListener(Event.ENTER_FRAME,checkLoad);
function checkLoad(e:Event):void {
[Code].....
View 1 Replies
Jul 22, 2011
I'll just go ahead and C/P the entire function to ensure you guys see everything going on:
public function directorsPrepsToShow():void
{
var tempDPrepsAC:ArrayCollection = new ArrayCollection;
var dprepSD:Date = new Date;
var dprepED:Date = new Date;
[Code]...
View 1 Replies
Sep 6, 2011
I am trying to run a JSFL script from within a C# project, where the JSFL script opens up a .fla file, modifies it n times, and exports n .swf files before closing. From the C# project, I am starting up the JSFL script through the Process class. I try to wait for the JSFL process to finish through the myProcess.WaitForExit() command, but it doesn't work. The remainder of my code C# executes before the JSFL process finishes exporting its .swf files. Is there any way I can throw something that the C# project can catch from the JSFL file or some other solution?
View 2 Replies
May 8, 2004
I'm using a timer which triggers a gotoAndPlay after 5 secs. It works fine but I am now trying to work out if it is possible that if I press a button I would be able to stall the timer. i.e the goToAndPlay only happens after 5 sec otherwise the it is prevented and the the timer goes back to zero. I know its a bit difficult to describe but I have attached the .fla.
In terms of the code I'm using: I have the function:
stop();
function pause(){
//play();
gotoAndStop(21);
clearInterval(timer);
};
This function is called when the playhead hits a certain frame: i.e.
stop();
timer = setInterval(pause, 3000);
View 2 Replies
Aug 26, 2010
Is It possible to load Html page inside Adobe Flash Professional or Adobe Flex.
View 1 Replies
Jul 29, 2010
I'm wanting to create a moving object that will be exported into a tv commercial. Object has already been created in Adobe Illustrator, and now will be dropped into flash for adding movement. The destination commercial will be created in Sony Vegas, with the settings of (Australian) PAL television (25 fps, 576x720 pixels, lower field first).Thus keeping it simple, I want to set Adobe flash with the same output format, meaning that the canvas will have to be 576x720 pixels at 25 fps. So far this seems to have worked okay.Now I'm wanting to get rid of the canvas colour, just like I have here in this photoshop screen shot.
Judging by the colour palette in Flash Professional, it looks like it can't be done. I've checked "transparent palette" through yahoo and google, and had no results. The adobe documentation only details how to remove a background in Photoshop.
View 1 Replies
Sep 1, 2010
I have created drawings in Adobe Flash and saved them as .fla files. However, when I try to save the files as JPEGs beyond a certain resolution (such as 4000x4000 pixels), the image gets altered. Essentially, it get's cropped, but some background is left in the remaining pixels.
Original image (.fla)
Jpeg image (with the saving problem):
View 2 Replies
Sep 20, 2010
I'm a bit confused with the purpose of these programs. For example if I want to create a game or utility app that runs on air. Can I design it in Flash Professional and later open in Builder for more heavy coding? Or is Catalyst supposed to be used as the design program?
I used to think that you design stuff in Flash Professional and then open the project up in Builder to do more deep coding.
View 1 Replies
Apr 27, 2011
i am trying to install a copy of Flash macromeadia 2004 mx profesional. the software installs fine when i go to open it it apears in the dock and nothing happens. right clicking on the icon in the dock the program says it's not reasponding.
on the box on my flash it syas made for mac osx 10.2.6 and my mac is running mac osx 10.6.7
View 3 Replies
Sep 21, 2011
I downloaded the trial version so I could work on the final project for class but for some reason when I tried to save it my computer froze up. Is this because the save feature is turned off for the trial version or was it just my computer? If I can't save using the trial version than I wasted memory on my computer and a lot of my time downloading the trial version that isn't going to be very useful to me.
View 2 Replies
Sep 25, 2009
I recently purchased and installed Flash CS4 Professional on my home computer (HP Windows XP Media Center Edition). AS2 works as a Publish Setting, but AS3 does not function in any way.After my initial installation, I ran a CS4 update of all programs, including updating Flash CS4 to 10.0.2.I have uninstalled the software and re-installed it in the "simplified" mode. Updated to v10.0.2; no change in AS3 failure. I have run the Adobe Support Analyzer, and an error has been found in the installation log file (for both the initial installation and the re-installation). But use of the Package for Support button (repeatedly, over 4 days) fails to upload and fails to produce a "key", yielding this message: "The storage server is unavailable! Please try again later."Here is what I mean by ActionScript 3 failure:With any script in the Actions-Frame panel, clicking Check Syntax produces this message: "This script contains errors. The errors encountered are listed in the Compiler Errors Panel." The Compiler Errors Panel is always blank. When I am working in AS2, an intentional script error immediately is identified correctly in the Compiler Errors Panel.With any script in the Actions-Frame panel, clicking Auto Format produces this message: "This script contains syntax errors, so it cannot be Auto Formatted. Fix the errors and try again."Any .swf produced with CTRL+Enter sits in its initial state and does not run or otherwise have interactivity..
fla files I have found the failure with include: AS3 examples from the Adobe Flash website; AS3 files I produced with Flash CS3 Professional on a previous employer's computer; a simple "stop();" in the Actions-Frame panel for the first frame of a movie clip.I have also made sure that my computer has updated versions of the Flash 10, 9, and 8 players. A .swf file (AS3, Player 9) I made with my employer's Flash CS3 software runs fine on my computer. But producing a new .swf from the same .fla file on my home computer with CS4 yields an inactive file.Adobe technical support is unable to deal with ActionScript problems and referred me to the community of Adobe expert users.
View 14 Replies
Dec 19, 2011
i am new with adobe flash and i have made 2 swf files that need to link to one main one, i am not sure what the actions should say. so far my programming for my main swf where i want all the other swfs to open from are:
var movieLoader:Loader = new Loader();function addMovie(event:Event):void {var movieRequest:URLRequest=new URLRequest ("slideshow.swf");//define a loader to load a movie to the stage//Set the loaders load property to the the var movieRequestmovieLoader.load(movieRequest);//add the image to the stageaddChild(movieLoader);//set its x and y positionsmovieLoader.x=0;movieLoader.y=0;}PictureSlideshow.addEventListener (MouseEvent.MOUSE_DOWN,addMovie);
function activateButtons() { removeChild(movieLoader); }
[Code]...
View 1 Replies
Jun 10, 2010
I'm running Flash Professional CS5 on Windows XP OS. When using Flash the program is freezing on me. So far this has happened when importing images to the stage, publishing the file and testing the movie. My only option is to force Flash to close. Sometimes, this freezing is accompanied by the standard "Adobe Flash has encountered an error and needs to close" message, but this is not always the case. This is my first time using Flash, and I'm creating a video using ~400 BMP's so the .fla file is quite large (12MB).
View 6 Replies
May 30, 2011
I was going to download the trial version of Flash Professional CS5.5 but when I got to the download page it wasn't downloading. The "Download now" button was there, but it was unclickable, when I clicked on it it didn't work, plus it was a little dimmer than I remember it was when I downloaded another trial. I'm also using the latest version of Google Chrome and I tried downloading it on IE and Firefox.So, is there any solution to this?
View 4 Replies
Jul 29, 2011
I'd like to convert a Adobe Flash Professional CS5.5 .fla file to an Adobe Flash Professional 8 .fla file. Is this possible without downloading Adobe Flash Professional CS4 and CS3?
View 3 Replies
May 18, 2010
<body><p>hello!</p><p> </p><p><strong>problem 1.</strong></p><p> </p><p>Why the blur and frame is covered by two books, while i set it should be on the top?</p><p> </p><p style="text-align: center;"><a href="http://img94.imageshack.us/i/32651165.png/" target="_blank"><img border="0"
[code]....
View 1 Replies
Oct 10, 2011
My site that mainly has Flash was recently updated with a file made from CS5. In my google dashboard there are a lot of new keywords that are only in the Flash file. My page ranking also dropped from 4 to 11. Does anyone know if any changes from CS4 to CS5 could have caused this? If so, what can I do to disable this compatibility with search engines?
View 1 Replies
Feb 27, 2007
I'm a designer considering creating a video project with Flash. I've read some of the security threads on the board, but they are way over my head. I will have a simple Flash file with text and a dozen imported FLV video files.If I use the "protect from import" option, will that keep the videos from being stolen from within the swf? Or, is that just a mediocre hurdle that can be easily overcome by someone wanting to dig into my file?
View 4 Replies
May 15, 2009
Is there any easy solution for converting DVD to Flash? I have an instructional DVD that I need to add to a website.
View 5 Replies
Jul 6, 2009
Alright I know this is gonna seem ridiculous, but I've done it a few times and something always goes buggar.. so using a button already made from a template the code is this:
onClipEvent (load) {
num = 5;
link_num = _root.getMenuSystemOrder(num-1);
[Code].....
View 6 Replies
Aug 20, 2009
I have a swf video with sound and I would like to convert it to a mov file. When I inport the swf file into After Effects, the sound does not inport. How can I convert this file to a mov file along with the sound? I have Master Collection CS3.
View 5 Replies
Dec 18, 2009
I have a swf file that I need to convert to Quicktime mov file. I have looked on the internet and found many programs but they are all trial and you must purchase to fully complete the conversion.
View 5 Replies
Jan 5, 2010
I have a _mc made visible by, instruct_mc._visible = true;Once the _mc is visible I would like to have a button 'within instruct_mc' that will make, 'instruct_mc._visible = false; again' is this possible? If so what would the AS2 command have to be because the button dose nothing until I take it out of ' instruct_mc
View 4 Replies
Jan 11, 2010
I'd like to have my viewers mouse over any of the MovieClips on the scene and using the keyup / keydown have only that MC scale up or down. The scaling should only effect the moused over MC.Here is what I'm using for the scaling on one MC now...
var Listener:Object;Listener = new Object();Listener.onKeyDown = function(){ if (Key.isDown(Key.UP)) { container._xscale = container._xscale + 10; container._yscale = container._yscale + 10; } if (Key.isDown(Key.DOWN)) { container._xscale = container._xscale - 10; container._yscale = container._yscale - 10; } };Key.addListener(Listener);
View 2 Replies
Jan 11, 2010
I am trying to convert a .swf to .mov in Mac Leopard, and I have many rules to follow for this particular purpose.
.mov must be 640x480 or 720x480under 50 MB(my restriction) needs to look really good I have tried the following:
Export from Flash to .mov - I get 300 MB and it looks pretty badThis converter [URL] couldn't even take my .swf for some reasonThis converter [URL] works (37 MB) but the quality is pretty lowBring the .swf into Premiere and then export, which works great, but the file is 737 MB - even when I lower the quality all the way down to 1
View 5 Replies
Jan 12, 2010
I have a swf that uses actionscript 3.0 to drag and drop images, activate buttons that run movie clips and manage the display list. It runs flawlessly when I execute it directly (i.e. double-click the swf), but I want to publish it on the web -- so I used File -> Publish to create the necessary html file, but when I run it in a browser (I've only tried IE) the initial screen looks perfect, but none of the buttons and drag and drop features work. Also,when I run the swf using File -> Publish Preview, it fails exactly the same way if I choose HTML, but works perfectly if I choose Flash.I created a pared-down version of the fla (see the code below) to try to isolate the problem, and the behavior is exacly the same.I'm attaching the swf and html files for the pared-down version.
- actionscript 3.0 code -----import flash.display.StageDisplayState;import flash.display.Scene;import [code].....
View 12 Replies
Jan 20, 2010
I don't see any export settings to export in *.flv or *.f4v format. Do I have to convert *.swf to those formats?
View 1 Replies
