the following actionscript is for a simple preloader for a movie i'm working on. It works fine in Firefox but the movie stops on the first frame of the preloader when opened with Internet Explorer. Has anyone had this problem before?
stop();
addEventListener(Event.ENTER_FRAME,checkLoad);
function checkLoad(e:Event):void {
[Code].....
I'm using flash cs4 Pro. I added an FLV_Playback component - (I then downloaded the newer FLV_Playback 2.5 component and got that installed properly) - and I attached a 3 1/2 minute music video that I have on my server.The video starts ok but then stalls after about 30-60 seconds; after a while it starts back up but then stalls again after a while.Do I need to do some specific buffering that isn't automatically handled by the flash IDE's FLV_Playback 2.5 component?
View 2 RepliesI've worked out a great way to create a pixelized wipe effect, with movie clips of pixels nested in rows. I've created a loop that goes through each row, and then another loop inside that loop for the pixels in each row. I then use a random number between 1-0 for for the delay before it alpha-ups the pixel. I used Greensock for the tween and it works great. One problem, I can't stall the for loop for the rows, and every row comes up at once. Still, the pixels are staggered, and this is a nice effect, but I want it to move from left to right. So my code looks like this: (BTW, yes, AS3 does have setTimeout and it works fine)
function stripeWipeUp(stripe:MovieClip):void {
var total = stripe.numChildren;
for (var i:int = 0; i<total; i++) { // the rows
trace(i);
setTimeout(function() {
[Code] .....
What happens, with the setTimeout in there, is that the "i" for loop hits every row (there are 27) before one setTimeout gets finished. So, it doesn't work as it should - the next loop should not execute until the setTimeout is finished. How to accomplish this so each row gets stalled by about 500 ms?
I'll just go ahead and C/P the entire function to ensure you guys see everything going on:
public function directorsPrepsToShow():void
{
var tempDPrepsAC:ArrayCollection = new ArrayCollection;
var dprepSD:Date = new Date;
var dprepED:Date = new Date;
[Code]...
I am trying to run a JSFL script from within a C# project, where the JSFL script opens up a .fla file, modifies it n times, and exports n .swf files before closing. From the C# project, I am starting up the JSFL script through the Process class. I try to wait for the JSFL process to finish through the myProcess.WaitForExit() command, but it doesn't work. The remainder of my code C# executes before the JSFL process finishes exporting its .swf files. Is there any way I can throw something that the C# project can catch from the JSFL file or some other solution?
View 2 RepliesI'm using a timer which triggers a gotoAndPlay after 5 secs. It works fine but I am now trying to work out if it is possible that if I press a button I would be able to stall the timer. i.e the goToAndPlay only happens after 5 sec otherwise the it is prevented and the the timer goes back to zero. I know its a bit difficult to describe but I have attached the .fla.
In terms of the code I'm using: I have the function:
stop();
function pause(){
//play();
gotoAndStop(21);
clearInterval(timer);
};
This function is called when the playhead hits a certain frame: i.e.
stop();
timer = setInterval(pause, 3000);
I've got a flash movie with preloader. Preloader Event.COMPLETE listener looks like this
removeEventListener(Event.ENTER_FRAME, onFrame);
stage.addChild(loader.content);
parent.removeChild(this);
The problem is that when I try to print the movie that was loaded by it, preloader is printed instead. Why can this be happening?
So I've got a large movie (about 94k) that I need to preload. I used my usual Preloader script, which has been working great for me FOREVER and it just doesn't go! If I take out the movieclip with the images (yes they're optimized half to death) it loads fine. Main content is a movie clip on second frame of main timeline.There's a stop action on second frame of main timeline.[code]
View 7 Repliesi am working on an intro for a friend of mine and it includes a lot of individual photos. the preloader takes forever but i can figure out how to only load half of the movie instead of the entire thing before it plays. here's the code i have for the preloader itself:
Code:
onClipEvent (enterFrame) {
loading = _parent.getBytesLoaded();
[code]...
here's a link to the current test page so you can see the entire intro and how long it takes now with that code to load. i just want it to load part of the file instead of waiting for all of it.[URL]
i am putting a preloader in a seperate scene in my flash movie.for some goofy reason, it will go to the preloader and get to lik 99% and stop, and will not proceed to the next frame. i have tired EVERYTHING that i know to make it work, but it will not.[code]it is placed on a moive clip that retains all the text and graphics for the preloader.like i said the only thing that won't work is that it will not proceed to the next frame.i have replaced the _parent, to _root. i have used frame labels instead of ("Scene 2", 16). i have no idea what else to do.
View 14 RepliesThe Flash movie runs correctly with the preloader when it is run inside Flash. When I upload to IE, the preloader doesn't run.
View 2 RepliesI'm trying to add a preloader to my flash movie so the user doesn't have to wait for additional frames to load while they are navigating. When I try to shift my current frames over by 2 frames to make room for the preloader I get this error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at APIVisionDigitalRecall_fla::MainTimeline/frame3()[APIVisionDigitalRecall_fla.MainTimeline::frame3:20]
at flash.display::Sprite/constructChildren()
at flash.display::Sprite()
at flash.display::MovieClip()
at navBar()
Everything works fine before I shift the frames by 2, so I don't understand why I'm getting a complier error abut an object not existing. What to do to add a pre-loader to my existing movie without moving everything over by two frames?
I was planning on putting this code on frame 1:
ActionScript Code:
var kbtotal:Number=stage.loaderInfo.bytesTotal/1024;
var kbloaded:Number=stage.loaderInfo.bytesLoaded/1024;
var percent:Number= Math.round(kbloaded/kbtotal*100)
loader.gotoAndStop(Math.floor((precent/100)*100));
loader.loadingStatus.text=Math.round(kbloaded) + " lb / " + Math.round(kbtotal) + "kb";
This code on frame 2:
ActionScript Code:
if (kbloaded == kbtotal){
gotoAndPlay("Main");
} else{
gotoAndPlay("Load");
}
I've been having a problem with my percentage preloaders today... The script comes directly from this tutorial... and I've used the same script in at least 3 other Flash movies, but this time the Flash movie doesn't run properly, and i get this error:
Originally Posted by Adobe Flash Player 9 A script in this movie is causing Adobe Flash Player 9 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?" I don't get any compiler error reports.. and the movie runs fine when I test it in Flash, but I get the pop-up error when I try to open the HTML web page with the movie embedded. The Actionscript in frame 1 is:
[Code]...
I want to make a preloader for flash mx 2004 that when it finish becomes to decrement another time. I would like to do it to modify the flash preloader component.
View 2 RepliesEverything is embedded in an HTML site. The HTML loads a preloader that then loads the actual flash movie. Inside this movie I created a few buttons, inside a scroll bar movie clip. I want the buttons to load a whole new movie inside the same html. The code I'm using in the button is simply:
on(release) {
loadMovie("new_movie.swf", 0);
}
The problem is that it works beautifully in the Flash movie tester but doesn't do anything when tested inside the browser, embedded in the HTML. I think the problem is that the HTML embeds as an object the first movie, the preloader for the menu movie, not the menu movie itself.
I want to add a preloader into an existing flash website file. The flash file is made of 5 layers, with one movie clip on each layer for each page of the website pages. I want to be able to put a preloader on the home page to let me viewers know that the site is not fully loaded before they start viewing the other pages (it's a portfolio site, so there are a lot of images). Can I add a preloader movie clip to appear on the home page that will loop until the entire site (all 5 frames/pages) are loaded?
I do not want to add another frame in front of the existing frames because I would have to edit 200+ portfolio frames and script.
I want to use a preloader that was created in Actionscript 2.0 (because I couldn't figure out how to do it in 3.0) - but the splash page and website are in 3.0. Is there a way to segue from the preloader to the splash page? The preloader uses Actionscript to call Scene 2, but I would like it to call an external .swf file if possible. Can anyone tell me how I could do this? -- Or a better way, that does not involve redoing the loader
View 2 RepliesI just wondered if it is possible to have a preloader for each MC within a movie? I have one simple preloader for the movie:
[Code]...
Now my movie is 60 frames long, the above will only preload the first 30 frames right? So If I have a button that goes to frame 35 on the main timeline and on frame 35 is MC1, can I have a preloder within this MC1 which is 55 frames long? I am just trying to get away from loading seperate swf's into levels!
[Code]...
I'm trying to set up a preloader for my movie, and I'm having some trouble with paths etc. My main timeline has two movieclips, one for the preloaded content, and one for the preloader. The instance name of my content mc is ycmovie, so I've used the code below to try to access the loading details. My preloader mc contains the following:
Code:
total_bytes = _root.getBytesTotal();
loaded_bytes = _root.getBytesLoaded();[code].....
I assumed the field name was the instance name? But obviously I'm using incorrect syntax in the path.
I just wondered if it is possible to have a preloader for each MC within a movie? I have one simple preloader for the movie:
[AS]
total_bytes = _root.getBytesTotal();
loaded_bytes = _root.getBytesLoaded();
percent_done = int((loaded_bytes/total_bytes)*100);
ifFrameLoaded ("Scene 1", 30) {
play ();
}
[/AS]
Now my movie is 60 frames long, the above will only preload the first 30 frames right? So If I have a button that goes to frame 35 on the main timeline and on frame 35 is MC1, can I have a preloder within this MC1 which is 55 frames long? I am just trying to get away from loading seperate swf's into levels! Maybe something like this:
[AS]
total_bytes = _root.MC1.getBytesTotal();
loaded_bytes = _root.MC1.getBytesLoaded();
percent_done = int((loaded_bytes/total_bytes)*100);
ifFrameLoaded ("_root.MC1", 55) {
tellTarget ("_root.MC1") {
play ();
}
}
[/AS]
I tried the above and it just showed 100%.
Is there Actionscript 2 that can be put in a preloader and play only the first movie clip on the root timeline instead of all of the root's timeline (which happens using getBytesLoaded or movieclip._framesLoaded() )? I want the preloader to just load the first movie clip and let the user
read this screen while the rest of the root timeline continues to download.
how to link the main movie to the preloader, so it counts the load and loads the main movie when it's done?
View 1 RepliesI am trying to use a preloader for a larger .swf file that loads inside of a movie clip. I was wondering what code might work and where to put it. (preloader is a .swf). I am using CS4, ActionScript 1.0.
View 6 RepliesI've got a couple of questions regarding the same project.
1- When you view URL... in IE, you'll notice that it sometimes doesn't go past the preloader. I asked why this happened in an IRC channel, and was told to use swfobject. However, with swfobject, I have the same problem. Is something else the problem?
2- I have the code [code]
I can't believe I didn't knwo this before!..or maybe I did...! then I forgotI load a movie_root.sub.loadMovie("subm.swf", 1);How do I make a preloader into the loaded movie_root.getBytesTotal(); and _root.getBytesLoaded won't work now cuz _root.is nt the main timeline of the main movie!hat am I supposed to use?_level1. ? _root.sub. ? _parent. ?
View 7 RepliesWhat is the best structure and code to create a preloader which shows the loading of all data together. I mean the whole movie and then I have some xml, which I would like to load at the beginning. I want the preloader to show progress of everything that has to load including xml files.
View 2 RepliesI have a preloader which loads an external swf (an animation I created in flash) This works fine, except that when the movie plays, it's already halfway through. Here's the code..
[Code]...
I think I must be missing something fairly basic...I've searched but can't find the answer. I just want my animation to play from the start, once loaded. The swf is about 4 meg.
i have my main swf movie and in this movie i want to load another swf movie that have a preloader, but the preloader doesnt seems to work. take a look to it [URL] press the button, wen you press it the preloader seems to be finished, but the the movie is not loaded, then you have to wait a while to get load the movie. the movie with the preloader works ok but wen i load it into the main movie it doesn�t work. here is mi code for the button:
[Code]...
okay, i have a preloader in the first few frames. when i test it all it does is load the movie and then run the preloader.
View 14 RepliesI have a main index SWF that preloads an external video SWF... when i test it offline it works fine..when i test it online it doesnt work fine... Weird observation: Online it worked when the external swf was only 10-20 kb But when i tried with bigger file size about 3.5 mb (which is the actual video i want to load), it doesnt work.... on the preloader it says NAN%... Now...could anybody try to explain to me what the hell is going on? I am attaching the Flash files in CS4 and CS3 format...
View 5 Replies