Working in Flash CS4. When I publish my flash movie it opens fine on my computer but when I copy the folder with all the contents to another computer the skin show up fine but I get a white box where the movie should be. The same goes if we try to place it on a website.
When I'm in flash should I be going to
File Publish or
File Export SWF
To be placed in a website.
I have searched about the white flash that people experience embedding their content in an HTML and have read the solutions.
I am experiencing a white flash when I preview my SFW in Flash. It is a single frame project. I am have tried changing settings to no avail.
I have created many flash video over the years so I definitely know how to embed an flv into flash. Also, it is very hard to screw up the import video wizard in flash so I have eliminated that as a potential problem. I haven't created a movie in quite a few months and yesterday I tried to create one. I used the wizard in flash to import the working flv and when i hit ctrl+enter to preview, a blank white screen showed up. When I right clicked, it said movie not loaded. So I tried to use AS3 and netconnection to embed the movie. When I previewed it, the same thing happened. I then went to view one of my existing swf's that did not have a video and that did not work either. I searched and found the adobe flash player security preferences and changed settings and NOW I can view swf's that do not have video. I can ALSO view old swf's that have video embedded BUT as soon as I open the original fla file and press ctrl+enter to preview, the swf's DO NOT preview anymore
View 1 RepliesMy question is when I publish my flash movie it opens fine on my computer but when I copy the folder with all the contents to another computer the skin show up fine but I get a white box where the movie should be. The same goes if we try to place it on a website.
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
[code].....
Working in Flash CS4. My question is when I publish my flash movie it opens fine on my computer but when I copy the folder with all the contents to another computer the skin show up fine but I get a white box where the movie should be. The same goes if we try to place it on a website. [URL]
View 1 RepliesI tried all suggestions from the dreamweave forums and none worked.I am placing a CS4 swf movie into dreamweaver CS4 and when I preview in firefox I can't get rid of the 1 pixel white border.Have tried all settings, including setting the wmode parameters to transparentBorder set to 0, frame set to 'top', image set to top.If I change the background of the frame to blue for example, I get a 1 pixel blue line. I believe the problem is in dreamweaver.How do I fix this?
<param name="expressinstall" value="Scripts/expressInstall.swf" /> <param name="BGCOLOR" value="#FFFFFF" /> <param name="SCALE" value="noborder" /> <param name="wmode" value="transparent" /> <!-- Next object tag is
[code]....
I have a project with a bunch of movie clips. Each movie clip has it's own animation. The problem is I can't see the movie clips on the stage, I have to test the movie. Live preview is checked, but greyed out. Is there anyway to live preview working on main stage?
View 2 RepliesNot sure why this is happening but everytime I test a movie (CTRL+ENTER) in Flash movie it produces a blank white screen. I even created a new Flash file with a simple Shape but it still gives me that blank white screen when I run test movie. It does, however, run correctly when I click the *.swf that got generated. I'm not sure if my work recently upgraded me to a newer version of Flash Player.
[Code]...
I'm having some trouble with getURL (I think). It works fine when I preview with Flash's html preview but it's not working on my server. It's pretty simple. [URL].selected1 is a user-defined variable pointing to a page: ie, when the user selects variable page1 the page to be opened is [URL]. Like I said, it works with Flash's preview, but not on my server(no 404 or any response). Does there seem to be a problem with my code or might I be overlooking a server error? Here's my code:
[Code]...
I've created a Flash animation and inserted the SWF file (created in Flash 8) into my Dreamweaver CS2 file. It all works fine in preview (both in Flash and Dreamweaver). But on any of the browsers the public file doesn't show the flash animation.
I have a transparent layer in Dreamweaver over the SWF file so that I could put hotspots which are working.
Here is the link to the website:[URL]
I've updated AC_RunActiveContent and downloaded a trial FlashCS5 but still no luck.
I am working on Flash CS5 Professional. I have created a simple fla file but not able to Publish->preview the swf file in Google Chrome. When I click on Publish Preview it opens a new browser window but nothing happens.
View 6 RepliesLet's say I create an empty movieclip called "Test_mc", then I create an as3 class "Test_mc" like below and then I set the movieclip class to "Test_mc".
public class Test_mc extends MovieClip {
public function Test_mc() {
graphics.beginFill(0xFF0000);[code]..
Now I can drag out instances of the Test_mc into the scene and get red circles when I test the movie. The problem however, is that I can't see the circles on the canvas inside the Flash IDE. Is there a way to get these actionscript generated grapics to show up?
I test my flashfiles (banner ads) several times during making by pressing Ctr+Enter. The movie then opens up in the Flash Player. It would be really useful to have play/skip/forward/backward/pause/stop (just regular moviecontrollers) buttons in the player to skip straight to the right part (not as part of the file). Is there any way to add this to flash? A plugin/extension maybe?
View 1 RepliesI have been working on an animation. I have imported my sounds to the library and streamed them live to the animation. They dont sound as good (muffled and distorted) when I publish the preview (flash or html). They sound fine within flash. When I switched the properties from "stream" to "event" it seemed to work great in the preview. I added a few more sounds and now only the first two mp3 clips sound clear and the rest now sound not so clear. They sound okay but I cant figure out why the rest sound bad? They now all have the exact same settings as the first two..
View 3 Repliesi have an html web site withe flash movie there is white block for a few second before the flash movie is up ow do i get read of it? can i make this white clock to be black or to have a clock the time until the flash movie is up
View 5 Replieshave a template which shows 12 bitmap and 12 symbols all the images are in place but when i preview the swf it only has half the images in the sequence?for exapmle it shows images 1,2, 4,5 7,9,11 they come in and go out in the sequences then loops again but misses out 3 6 10 12 ?? how can i get theses to show in the project.
View 4 RepliesI'm having timing problems with a music video I am working on. The framerate it 24fps which for a 22 second animation should give me 528 frames. However, In the preview of the slides the 22 second mark on the sound is reached by about 310 frames. What's more, the 22 second point in the sound is reached at a later time in an exported swf movie, but still not 528 or 310. Why is the timing different in all viewing modes, which one should I use to time my video or how can I set them to all display the video at the correct timing?
View 2 RepliesI am using Adobe Flash CS3 and press CTRL + Enter to preview the movie , but now I Cann't do it , the movie isn't display anything ( but I can preview only one scene by press CTRL + ALT + Enter). I try to publish the movie, the error message is not display but when I test debug . Flash shows the message that "Error open file 'my flash file path'+.swf" How can I reslove this problem
View 2 RepliesI have a flash project that I have been working on for a while, today its stopped functioning properly. To be clear. It still runs JUST FINE when I preview it (CTRL+ENTER), but when I publish the file and run the SWF file, or the HTML file the movie no longer functions properly. Specifically any ActionScript from the main timeline seems to no longer be functioning. ActionScript contained within movie clips continues to function properly, but nothing else.There is about 400 lines of code right now (variables, functions etc.)
View 8 RepliesThere is a white space above the flash file. My file is 360 pix high, but I need the default bar at the bottom. So I set it to be 400. But the extra 40 pix got shared by the bar and an unwanted white space on the top.
If I set it to 360, no space, but no bar either. In either case, there is an extra 2 pix double lines on top. I want to remove the space and double lines.
<table
class="Popup_Flash" border="0" align="center">
<tr valign="Top"><td>
[Code]....
When on a game site using flash player and trying to use full screen it goes to a blank white page. How do I correct this problem?
View 1 RepliesHow can I change the default publish preview player from HTML to Flash in Adobe Flash CS5.5??
View 1 RepliesThe only thing that has me puzzled is the preview field. Basically i have a background which is a movie clip, it basically transforms from the loader to the background (over 70 frames).
is there a way to have the preview field for the root movie display a child movie at a frame other than frame 1? At the moment it looks like this: [URL]
But i'm wanting it to look like this: [URL]
It would help or positioning other items if i had the background displayed how it will actually be?
I've changed nothing that I know of in making flash slideshows using swish and exporting to .swf format for inclusion in Dreamweaver except that now all of a sudden the flash item has a white background -- but only on my computer it seems when testing online; locally, it doesn't do that when testing and when using a different computer it doesn't do that. Any idea why a flash item would have a white background in some cases and not in others like that?
Like I said, I've changed nothing and have never had to put any parameters in place or do anything else of the kind; the swish program itself specifies the background as red, not transparent (not that the page the flash item is on has a white page anyway). I don't know if this is a swish, flash, dreamweaver problem or some bug on my particular computer that I can't figure out.
I have a WP 3.0.2 site. When I try to embed a swf file I have uploaded, all I get to show up, in either a post or a page, is a white area the size of the height & width paramaters. In order to play the flash video, I need to right click and select "play" from the menu so watch the movie.
I am trying to figure out what I am doing wrong or why there are not play, pause stop, controls showing up and why the video preview image does not show up either
I am pulling my hair out over this one.surprised
NOTE; The WP SWFObject Plug-ins do not help with this. I have tried many of them to no avail.
[Code]......
I have created a simple movie and placed it in an 'Under Construction' page. The whole page is meant to be black. When I open the browser a white box shows, where the movie will appear, while it is loading. I want the whole page to appear black.[url]...
View 2 RepliesI have a flash movie, height = 151px width = 228, this is placed within a table cell (
cellpadding = 0 cellspacing = 0 vertical-align = top), but when it displays within the explorer windows thereis a white space about 20px above the flash movie. I want the flash movie to appear directly under the grey lines.[code]...
After hitting next on this animation you can see there appears to be blank areas on the animation. If you mouse over them you will see buttons appear which is their "over state." When I publish the animation and preview it in Adobe Flash CS5.5 all the buttons are visible and work correctly. It is only in the brower (chrome, firefox, safari) with up to date Flash Player that is is not working. This is happening in a number of animations I created originally in CS4 last year, and am updating them as CS5.5 using AS3.
View 5 RepliesI have the Netbook version of Ubuntu Maverick Meerkat and installed Google Chrome stable. I installed the latest version of Adobe Flash.Here is the behavior:1. YouTube videos appear as a white screen when embedded on the page in Chrome. I hear sound.2 The video is normal when I switch to full-screen mode.3. HTML5 videos display normally in Chrome4. Firefox displays YouTube videos without any problem.5. Ubuntu Lucid 10.4, with the same software components, displays YouTube video in Chrome without problems.Any thoughts on correcting this odd problem?
View 1 RepliesI have a flash movie that has a thin white line on the left side which comes and goes as you stretch a window. Does not show up in any other browser. [URL] Same thing occurs in another site [URL] The flash movie is the same width as container div.
View 1 Replies