have a template which shows 12 bitmap and 12 symbols all the images are in place but when i preview the swf it only has half the images in the sequence?for exapmle it shows images 1,2, 4,5 7,9,11 they come in and go out in the sequences then loops again but misses out 3 6 10 12 ?? how can i get theses to show in the project.
View 4 RepliesI have a website [url]... which has dynamic flash images, the images have the same info in photoshop. However, some of them load as half grey. 1'st page, gallery image 4 and contact page.
View 2 RepliesI have some sound on a button and want it to be about half as loud as it actually is, do I need to edit it in a SoundEdit program? Or can I just make it play half as loud from within Flash?
View 1 Repliesi'm trying to load some external images of the web.when i publish preview my swf the image loads.but when i open the swf or html the image doesnt apear.i have tested every thing and found out Code:e.target.contentdoesn't exist in the published version.PS: i have set the local playback security to 'network' my code:
Code:
function loadImage(imageString:String)
{
[code].....
So I can create a circle and an oval using trig in flash. But what if I want to create an oval with rounder points? I'm using this code for circles and ovals:[code]Could anyone help me in editing the code so i can control the tips of the oval and make them rounder?
View 9 RepliesI have a movieclip with an image fading in and out (using an actionscript tween class set to yoyo). This movieclip is loaded into a dummy movieclip when a button is pressed. The first time you click the button the fading movieclip plays as it should, fading in and out continuously. However, the second or subsequent times the button is clicked the fading movieclip goes crazy, half fading in/out and half jumping from one alpha value to another.
View 7 RepliesBuilding a flash website in CS3. I've made every button the exact same way, draw a rectangle, convert to symbol, type as either button or movie clip (doesn't seem to matter and I'm not using rollover stuff), alpha 0% and stick it on its own layer above everything else.Action scrip is as follows:
main1.addEventListener(MouseEvent.CLICK, gotoMain);
main2.addEventListener(MouseEvent.CLICK, gotoMain);
function gotoMain(event:MouseEvent):void
{
gotoAndPlay(1);
}
that's with 2 buttons for main. I have the exact same code multiple times for many different buttons. It works everywhere except the last two buttons on my page will work the first time you click them from the main page, but then don't work after that until you click on the main page again. Then it works.These two:
babout3.addEventListener(MouseEvent.CLICK, gotoAboutb1);
bcontact3.addEventListener(MouseEvent.CLICK, gotoBcontact1);
the function is described on an earlier action keyframe:
bcontact1.addEventListener(MouseEvent.CLICK, gotoBcontact1);
function gotoBcontact1(event:MouseEvent):void[code]...
Of course I've tried just having one button do this and copy/pasting the button on different areas of the movie, but nothing I've done fixes. I've even gone through and deleted every button and AS and redone it. I've put every button on its own layer (shouldn't matter but I'm trying everything I can think of).if there is an easier way of using AS to navigate a flash movie let me know. The other options I've seen seem a bit too complex at the moment.
The first half of the tween doesn't work but the second half does. It only does this when I add the code link._visible = 0;. This is to make the alpha completly disappear.
View 1 RepliesI've made a presentation in the form of a swf movie using macromedia flash 8. I want to upload this to a website where when the website is loaded the movie would play automatically at a half screen size... Any host server that I could subscribe to? How to upload the file? Also, my swf file has an action script camera that doesn't work when I publish it as a html but it works in swf.
View 1 RepliesI'm having some trouble with getURL (I think). It works fine when I preview with Flash's html preview but it's not working on my server. It's pretty simple. [URL].selected1 is a user-defined variable pointing to a page: ie, when the user selects variable page1 the page to be opened is [URL]. Like I said, it works with Flash's preview, but not on my server(no 404 or any response). Does there seem to be a problem with my code or might I be overlooking a server error? Here's my code:
[Code]...
Working in Flash CS4. When I publish my flash movie it opens fine on my computer but when I copy the folder with all the contents to another computer the skin show up fine but I get a white box where the movie should be. The same goes if we try to place it on a website.
When I'm in flash should I be going to
File Publish or
File Export SWF
To be placed in a website.
I've created a Flash animation and inserted the SWF file (created in Flash 8) into my Dreamweaver CS2 file. It all works fine in preview (both in Flash and Dreamweaver). But on any of the browsers the public file doesn't show the flash animation.
I have a transparent layer in Dreamweaver over the SWF file so that I could put hotspots which are working.
Here is the link to the website:[URL]
I've updated AC_RunActiveContent and downloaded a trial FlashCS5 but still no luck.
I am working on Flash CS5 Professional. I have created a simple fla file but not able to Publish->preview the swf file in Google Chrome. When I click on Publish Preview it opens a new browser window but nothing happens.
View 6 RepliesLet's say I create an empty movieclip called "Test_mc", then I create an as3 class "Test_mc" like below and then I set the movieclip class to "Test_mc".
public class Test_mc extends MovieClip {
public function Test_mc() {
graphics.beginFill(0xFF0000);[code]..
Now I can drag out instances of the Test_mc into the scene and get red circles when I test the movie. The problem however, is that I can't see the circles on the canvas inside the Flash IDE. Is there a way to get these actionscript generated grapics to show up?
I test my flashfiles (banner ads) several times during making by pressing Ctr+Enter. The movie then opens up in the Flash Player. It would be really useful to have play/skip/forward/backward/pause/stop (just regular moviecontrollers) buttons in the player to skip straight to the right part (not as part of the file). Is there any way to add this to flash? A plugin/extension maybe?
View 1 RepliesI have created many flash video over the years so I definitely know how to embed an flv into flash. Also, it is very hard to screw up the import video wizard in flash so I have eliminated that as a potential problem. I haven't created a movie in quite a few months and yesterday I tried to create one. I used the wizard in flash to import the working flv and when i hit ctrl+enter to preview, a blank white screen showed up. When I right clicked, it said movie not loaded. So I tried to use AS3 and netconnection to embed the movie. When I previewed it, the same thing happened. I then went to view one of my existing swf's that did not have a video and that did not work either. I searched and found the adobe flash player security preferences and changed settings and NOW I can view swf's that do not have video. I can ALSO view old swf's that have video embedded BUT as soon as I open the original fla file and press ctrl+enter to preview, the swf's DO NOT preview anymore
View 1 RepliesI have been working on an animation. I have imported my sounds to the library and streamed them live to the animation. They dont sound as good (muffled and distorted) when I publish the preview (flash or html). They sound fine within flash. When I switched the properties from "stream" to "event" it seemed to work great in the preview. I added a few more sounds and now only the first two mp3 clips sound clear and the rest now sound not so clear. They sound okay but I cant figure out why the rest sound bad? They now all have the exact same settings as the first two..
View 3 Repliesi would like to know if it is possible to have a letter that is made up of multiple colors. for example above you will see a hebrew letter. the DOT underneath it is actually part of the letter, but it is a different color.is it possible to have this same functionality in flash? what i would need to do is upload an XML file with all the words, and i would need all the dots below the letters to be a different color
View 2 RepliesI'm having timing problems with a music video I am working on. The framerate it 24fps which for a 22 second animation should give me 528 frames. However, In the preview of the slides the 22 second mark on the sound is reached by about 310 frames. What's more, the 22 second point in the sound is reached at a later time in an exported swf movie, but still not 528 or 310. Why is the timing different in all viewing modes, which one should I use to time my video or how can I set them to all display the video at the correct timing?
View 2 RepliesI would like to know how you can preview different images from a FileReferenceList Normally with file reference you can do the following:
img.source = fileReference.data;I want to do this with more than one image and with using filereferencelist, I do the following:
var fileReference:FileReference;
var fileReferenceList:FileReferenceList = FileReferenceList(event.target);
var fileList:Array = fileReferenceList.fileList
[Code].....
How can I change the default publish preview player from HTML to Flash in Adobe Flash CS5.5??
View 1 RepliesAfter hitting next on this animation you can see there appears to be blank areas on the animation. If you mouse over them you will see buttons appear which is their "over state." When I publish the animation and preview it in Adobe Flash CS5.5 all the buttons are visible and work correctly. It is only in the brower (chrome, firefox, safari) with up to date Flash Player that is is not working. This is happening in a number of animations I created originally in CS4 last year, and am updating them as CS5.5 using AS3.
View 5 RepliesYou've probably all seen a YouTube video somewhere on the web. I'm interested in how they built their Flash player's feature that only loads the video's preview image when the video is in the view of the browser.For example, when there are multiple videos on a page, the videos below "the fold" will only load their preview when scrolled into view.
View 14 RepliesI saw this tutorial and it works great in actionscript 3.0 on its own - http:[url].... .But does anyone know to make something like this in actionscript 2.0? The reason being is my main site was created in 2.0 and cannot publish it in 3.0.
View 1 RepliesI need to play preview video first, before starts play any other video. I am using jw player
View 1 RepliesI've been working on a AS3 script to control my FLVplayback component. I'm very close to making this work. Let me describe what I want to happen.On my homepage I have a DIV container where my video will be located. I want a still image of the video to load with a play button over it.Upon mouse over I want the button to change colors, upon mouse click I want the video to play.I have a .FLA project I'm working. I've got a FLVplayback component, sourced to my .flv. I've created a button and it works. When you click it the video plays.I have 3 layers.
actions (this is the top layer)
buttons (has a button and progress bar)
assets (only the FLVplayer)
The following AS3 is set to frame1 in the actions layer.
I'm using FlashCS4, AS3 and DreamweaverCS4
Here is the weird issue.
#1. While working in Flash.If I do a publish preview the play button with load for a split second and then disappear to be replaced by the still image.If you click on the center of the still image where the play button SHOULD be, the video will play.
#2.If I view this online.The play buttons NEVER disappear, however the still image NEVER loads.
import fl.video.*;
import flash.display.*;
import flash.events.Event;[code]............
Ive made a movie that add strings from several input text fields to an array. This array is sent from the flash video to php. This is working fine when I preview the movie as Flash. The php script prints the variables as intended.
But when I preview it as html the arrays are all empty...
[AS]
on (release) {
number_of_attr1 = main._currentframe + 1;
suggestions1 = new Array();
[Code].....
I play games on Pogo and have never had a problem with their Flash Games until released Daily Hot Shots. It doesn't load fully and I've done EVERYTHING I know to do to get it to play. No errors show up. I can play ALL the other flash games but this one. When I right click, the name of the site's owners do not show up....I have the settings showing though Not all of the game loads and that's the problem. I've tried uninstalling and reinstalling....tried a different browser and have the same exact problem. THIS GAME WILL NOT PLAY.
View 2 RepliesI have a swf with two layer which both show when playing the animation in the flash timeline editor environment but when played in the preview or published one of the layers isn't shown.
View 2 RepliesI have an FLA file and movie and wish to upload the movie file to a server. However, when I click File | Preview in HTML the HTML file fails to generate (I see only the background colour of my FLA in my browser).
View 3 Replies