Long time lurker who can't find an answer thatfits this specific problem. I apologize if it has been answered. In the pic below,notice the edges. They look great on the stage, but I can't get the rendered .swfto look the same.
View 1 RepliesI've found using the 3D rotation tool to give rough/jaggy/pixelated edges to my vector clips, even after using:cache as bitmap"stage.quality = StageQuality.BEST;" in Document classIs there a way around this?
View 5 RepliesI'm an actionscript dude - I'm working on a papervision game.
I have an asset of which is 127 pngs in a sequence for an animation.
I can happily project this onto my papervision plane. Problem is, there is no transparency. I Can't use a BitmapFileMaterial as I have many pngs -
I have been trying to figure out a good strategy to perform a bitmap crop using Actionscript3. For example: I have a picture of a car and I want to crop out the car from the image alone and feather the edges so that they do not look jagged.
I am a flash noob and have only been using it for a couple of weeks. I've tried a couple of options and here is the last one that I have come up with it: I place red dots on stage that are draggable so that you can outline the object you want to crop and the dots are the bounds for a gradientFill that is used as the bitmap's mask. (I am using a radial gradient ... so the results are far from what I want, since the car is not an oval).
[Code]...
1) How can I fade just the edges of this custom-shaped fill outlined by the red dots?
2) I want to save the image out to a file once it's cropped. What strategy would be better for doing this using a BitmapFill or a GradientFill as a Mask (If it's possible with both)?
3) I may be using this strategy to crop faces later on.. anyone know of any good face detection APIs for as3? (also edge detection APIs)
Recently a client of mine decides he wanted rounded edges for his page vs. the typical square edges. This was after the initial design and at the point where it is almost complete.I told the client that in order to do this we would have to go to a full Flash web page meaning a full browser Flash page (everything is already flash).Now I told him that we could do this but because it was a new design and as you know that there is much involved in doing something like this i.e. all the paths will have to be changed because it will have to reside inside a mc etc.if there is an actual way to make the stage rounded only for future knowledge.I know I can make a round edge square or rectangle but it still has square edges at outer edge of the stage.
View 5 RepliesI have seen people complain about this, but no work arounds. The blurry eddges I see on the rounded portion of round rectangles is awful. IS there a workaround?
View 5 RepliesFlash has some serious problems with jagged edges on curved shapes. When adjusting a curve on a shape, flash shows that it is curved and then on releasing the mouse it turns into a sharp edge
View 1 RepliesI created an animation using the 3D rotation tool, but the quality, the rendering is very bad, rough jaggy pixelated edges. Is there any way to improve the quality.
View 3 RepliesI'm having some trouble with my Flash Professional CS5.5. When I'm doing freehand drawing it shows the edges around every stroke I make. I have tried going to the menu, View -> Hide Edges and also pressing Ctrl+H. It does make the edges go away from the most recent stroke, but at the next stroke it reappears. Flash also started to crash from time to time, kinda randomly starting with not showing me the layers and then crashing completely giving me an error message talking about some file. This started about the same time as the edge thing. How to reset the settings? (I'm doing simple frame by frame animations in a ActionScript 3.0 document, if it's of any importance).
View 1 RepliesI've made a flash image with the gif extention with Adobe Flash CS4 Pro. I have set the WMODE to tranparent and i've set the Transparency at the giv tab to transparent to. But now comes the difficult part. Each time when I export the image the background is still white.
What did I do wrong? and how can I fix it?
Here is the code :-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
[code]....
Overlay blending mode in flash on trasnaprent, imported images, doesn't work properly! It leaves dimmed black background instead of transparency. Same thing is in CS4 and in CS5. What is even more weird is that in Flash preview stage window everything is fine, and it works, but after publishing the SWF, you can see black background.I looked for workaround that...no success. No one answeres to this question.
-I tried with 24png, 8png, gif with different settings. No success.
-Tried also with After Effects, and then export to SWF, it works surprisingly.
I have used a loader to play a swf, and I've managed to scale it like I want it - now I would like for it to fade in and out. How do i do that? Below is the as3 script I am using:
var loader:Loader=new Loader();loader.contentLoaderInfo.addEventListener(Event.COMPLETE,f);loader.load(new URLRequest("BldgBanner_r3an.swf"));addChild(loader); function f(e:Event):void{loader.scaleX=.80;loader.scaleY=.80;}
I used FalshDevelop to compile PanoSalado opensource ".as" files to produce corresponding ".swf" files.it works great and my movie shows.However, when I run it via a webapp under Tomcat, it just sits there. The url is:Note that I'm running the same file (.swf) from the same place in the filesystem.And I even tried to embed the swf in an html page (actually a jsp page) to see if it would work.. but no dice... same issue.FWIW the html that is used to invoke the swf is :
<div id="flashbanner">this will be replaced by the SWF.</div>
<script type="text/javascript"> alert('0'); var so = new SWFObject('maps/ModuleLoader.swf','mpl','555','416','9', '#336699'); alert('1');
[code].......
I'm trying to create a video background for a game using the FLVPlayback component. I need to smoothly trasisition between multiple videos so I make a FLVPlayer for each one so that I can just tween the alpha when I need to show it. When I start the game I load everything and store the Playback components in a Vector, I think add them to the stage like this
for(var i:int = m_Videos.length-1; i > 0; --i)
{
addChildAt(m_Videos[i], 0);
}
Once the game is loaded though the first video dosnt render at all, so I have a see thoough background. But once I transition to a video that is on top of it, the top video renders.
flash mask working - transparency (wmode) is not
[Code].....
I would like to ask the experts for help. In a flash movie I want three lines of text where I want line1 to appear with a preset motion, then line2 directly below line1 to appear with a preset motion, then line3 directly below line2 to appear with preset motion. I want to have the smallest possible fla file.
View 5 Replieshow I can render just part of a symbol without hiding it behind another symbol. I wish to make a marque of symbols... I'm a c++ game programmer so I am familure with ways of specfing with part of a texture to render but I havn't found anything with Flash that looks like I can do the same kind of thing. I'm using CS5 with AS3.0
View 4 RepliesI recently upgraded my IE from 8 to 9 and immediatly saw problems with text. No problems in loading, or giving errors, etc. Just quality of some text.
With IE9, in many of my flash (cs4) applications, text that had been quite sharp is now blurry and hard to read. Some text is fine, other poor, and I cannot seem to see what is common to the places where text is poor. If I shift to IE8 compatability, all is fine there. Back to IE9, the problem.
If in IE9 I check in Internet Options/advanced to "use software rendering not GPU rendering", my IE9 flash stuff looks fine. That solves in my end, but obviously no help for publishing on the web. (This was a recomendation somewhere.) have apps that looked fine, only to have parts of them almost unreadable when viewed in IE9. All fine in Opera, firefox, safari, IE 8/7. Has always been somewhat a problem in chrome, but have seen where that is a documented problem.
So I am working on an interactive piece that requires the use of pre rendered 3D animation clips with transparency. what I was curious about is... Would it be better to export the video as a series of PNGs (the longest is about 600 frames long) and import those into my movie clip or should I export the video as an FLV that is close to 400 Mb in size? Or am I completely missing a a better way to get this pre-rendered animation into my piece as a clickable movie cllip with transparency?
View 2 RepliesWhat makes a camera compatible with flash? I have a camera I purchased from IDS Imaging and it shows up in my camera list in as3 with print out the array made from Camera.names. But when I go to use it, it just doesn't show up. I do have a lens on it, and it can see it working when I used the IDS software provided for testing. I've also been able to make it work in c#, but I want to use it for a flash app I'm developing.
View 1 RepliesI am currently working on a flash website that has several flv videos on it. Since the website layout has a slight tilt, I have had to transform the videos to slightly tilt as well. The problem that I am having is that when I do this the image becomes very pixelated and the edges of the video become jagged. I have somewhat fixed the edges issue by making a mask around it but i really dont know how to make the resolution better, or what causes it to loose resolution when slightly transformed. The size of the videos is the same as encoded. All I do is tilt them upwards on the right side a bit.
View 1 Repliesi want to collapse a complex scene with all different layers and different transparency into a single layer (or as few as possible) to optimize the flash file for online (were experince proformance issues). I have tried the combine and manually copying pasting into one layer but it cuts the fill below and replace with transparent fill. I want to have a end file that is 100% solid.
View 1 RepliesIs there a major issue with rendering Flash in Safari?
I have search for a way to display, for example, Adobe Home Page in Safari and be able to see all the menus "on top" and have not found a solution.
I have tried setting wmode to either opaque or transparent but no change.
I am using the latest download of Safari (vs 4.0.4[531.21.10]) on Windows 7.
I am facing a problem with one of my animation containing a 3D motion tween. When I play it, it is not fluid, it get stuck, the rendering is not good at all.
View 4 RepliesI was wondering if anyone here had any advice on rendering large numbers of identicalanimated instances. The first step we undertook was to separate out the parts of the instance which are static and render flag them cache as bitmap. However I was wondering if there was a way of rendering the same object multiple times without the player having to recalculate the animations separately for each etc?
View 1 RepliesI'm having trouble with my computer and the latest version of Flash. What happens is that everytime i get in contact with a flash-based media on the internet (Youtube, banners, games, etc.) my computer freezes and after 15 seconds it starts 'melting', as in the pixels slowly turning blue and black. This happened right after i installed the latest version of Flash. I have to take the battery out of the computer to get it working, which is offcourse not healthy.
Does anybody have an idea what this is due to and how it can be fixed? I am pretty desperate.
I'm working on CS4 / Windows 7. I recently moved from XP where everything worked fine. My problem is that compiling any movie now takes about 40 seconds longer than before. I have been able to narrow down the issue to this. There is folder in my classpath which is on a local network. It is this folder that is causing the issue. Plus, even if this folder is not required at all to compile the movie it slows it down anyway. As soon as that folder is removed from my classpath everything works as it should -- of course, for movies which don't require that folder to compile :-) --. Having said that removing the folder or changing its location is not the solution I'm looking for.
View 1 RepliesThe images that cycle through on the top of this page: [URL]..There is a transparency "curtain" that is used to transition between the images. Does anyone have any suggestions on how this can be replicated?
View 1 RepliesWhen applying text formatting to a comboBox, the text formatting appears perfectly on the dropdown menu items but the textField text disappears.Removing the text formatting from the textField makes the textField text reappear but of course there is no text formatting.
Is there a trick to this.