My Text is visible before rotating it to verticle position using Free Transform Tool. But when once it is rotated to verticle position the text disappears from the Stage. And it is not an animated Text as well?
View 4 Replies
When I try to rotate using Gradient transform tool, I can't rotate my gradient 45 degrees or 90 degrees. nap to objects is enabled and holding shift also doesn't work.
View 5 Replieshow can I modify the code in Senoculars Free transform tool so it resizes on width/height basis instead of scaleX / scaleY like in the current version?
View 2 RepliesI have a free transform tool simulator that rotates an image when the middle top button is clicked and held. The image rotates to 180 and then stops. Does anyone know why it is getting stuck?I have enabled viewsource for the code. the method is in WidgetEditor.as
View 3 RepliesI've been using Senocular's free transform tool: [URL] in tandem with an image upload (using the fileReference class) so that users can upload an image and the transform it.
The free transform class has a function that allows you to restrict the scaling of the movieClip that you apply the free transform to, but it works on a 'scale' rather than specific height and width properties. My problem is, that I don't know what he dimensions of each uploaded image will be, so if it's restricted to a scale, some images will be allowed to be bigger than others....
For some reason when I rotate text it disappears from the swf when i test movie!!?
View 2 Replies[Code].....
Text on the box disappears on mouseOver. And also mouseOver doesnt work well after all. how can i correct those
I'm having trouble with loading in an external image that I can transform with the Senocular Transform Tool class. I have managed to load in the picture but the transform class doesn't seem want to grab it. Eventually I want to us the FileRef to upload the image but I just need to figure out how it works first. Here my code to load in the external image
[Code]...
The transform class can grab the other movieclips but it doesn't want to grab the new image loaded in from the code above.
I'm using Flash CS5 proefessional and trying to do a demonstration. The demonstrationincludes a rope-like lanyard that is quite long and needs to bend at many many points. After successfully applying the bone tool to the object, I tried moving it with Free Transform.However, when I do so, the lanyard suddenly disappears, besides a couple tiny pieces. I didn't delete the previous layer, and I had unioned everything before breaking it apart again to apply the Bone tool.
View 3 RepliesCan someone explain why the text of a dynamic text object disappears at runtime when rotated?It happened when I rotated a MovieClip object via actionscript that contained a dynamic text object. So, to test whether this happens all the time, I created a movie clip again with a dynamic text object in it, populated the dynamic text object with a single letter, and rotated it by hand and ran the movie - the letter disappeared.
LOL in a happy, rare accident, I discovered the answer myself. Page 432 of the Flash 8 Actionscript Bible says, "Aside from just allowing text to look the way you want it to look, embedded fonts actually enable your Textfield objects to do some things they wouldn't otherwise do. For example ... a TextField object that uses device fonts (nonembedded fonts) cannot be rotated nor can you change the alpha. But once you embed the font, you can do both of these things."
How: (for dynamic or input text objects) clicking the Embed button in the Property inspector.Note, this will increase the size of your swf. Just embedding the lowercase and uppercase letters from a-z of one font increased the swf filesize from 3-9KB.
Working with senocular Transform Tool - How to remove/disable tool for objects Im new to AS3, and i have to use it for my current project. I have used the AS2 Transform tool extensively, but needless to say, the AS3 version works entirely differently.
The way i understand it, the tool applies to and every Sprite , movieclip on stage
[Code]...
I have masked the video clip. The masked clip is working fine. But the Actionscript 3, which contains 2 more SWF external movie clips not loading those files. Once I remove the mask they start working.
View 9 RepliesWhere from i got transform manager as3 for free
View 5 Repliescan any body tell me where from i got Transform Manageras3 for free
View 9 RepliesI use this transform managerblog.ryantan.net/2010/08/free-transform-manager/I'm trying to add bounds support.But it doesn't work fine:ki44321.ho.ua/testmanager/Here is source (FlashDevelop project):ki44321.ho.ua/testmanager/source.rar
View 0 RepliesBasically, the scenario is this, when a user clicks on an movie clip instance at runtime, I want to be able to display free transform points that the user can click on and drag to transform the objects scale, i.e. Just like the Flash's free transform tool. Does anybody know how I can go about doing this? Is there a class in actionscript?
View 1 RepliesI'm trying to get familiar with design patterns, modularity, unit testing and etc... (with ActionScript). I'm developing a simple "Free transform tool" right now, just as a exercise, but I don't like the solutions that I come up with so far, so I'll try to walk you trough my line of thoughts. When I come up with the idea I was thinking "What to write so I can test this great Unit testing framework FlexUnit", the first thing that I saw was guess what.. a free transform tool. :) When I was thinking about the architecture of the tool I run every scenario trough "How can I write unit tests for that thing?", so I come up with some kind of twisted MVC meta pattern:
A view that's holding all components (rotation area, drag area, resize buttons)A model (or something like that) that holds the necessary logic (setSize, setPositiom, rotateAroundCenter, etc..).And a controller that add listeners to the view components, update the mouse cursor when its over a component, get the mouse coordinates when is interacted with a component, do the calculations and call methods from the model that will update the view and the object that is benign transformed.
I was thinking: "Ok its flexible, i can switch M, V or C at any time, I achieved my main goal, because I can make lots of unit test for the model, where the important calculations are, so its great..".I just have started implementing it, but I think most of those thoughts are wrong. Yes I can change the view and add new skin but it's not flexible at all, if I want to add "skew" (or any other) functionality I should rewrite (or If I'm lucky just extend) M, V and C.Yes I can make bunch unit test for the model but controller's calculations will be hard to test.
So now I'm thinking for something like the Decorator pattern that will allow me to create whatever combination of controls i want to use and keep their logic separated, but I want to have the option to re-skin the controls themselves and to keep the logic separated so I can do the tests.I realize I want to create some kind of "ultimate transform tool", but I'm really trying to push my limits and learn something.
I'd like to create a free selection tool (also known as lasso tool).I want to use it to select sections of an image with the mouse, and then copy the selected parts.
View 1 RepliesAre there any free tool for converting swf flash to gif file?[URL]...
View 3 RepliesI am looking for some free flash maker tool. I have found one. 789soft-com/photo-flash-maker.h-t-m-l[/url] But it has not enough function.
View 1 RepliesHas anyone a chance to make custom skin for new transform tool v2 beta? Or can anyone guide me for a starting point?
View 0 RepliesI am a teacher I used the senocular transformer tool "action sript 3.0 Transformer tool [url]... to create a program for my students I want to add a reset button to it may anyone help me to do so?
View 3 RepliesI have a web application in which a user has to upload images to a gallery. At the moment they need to upload one image at a time so it's pretty tedious.
I'd like to implement a system where they could potentially drag and drop files into the browser, or select a folder to upload.
how to load an external image with fileReference and loader into a movieclip such that it can be transformed with senocular's transform tool.Here's what I have so far: (It places the image down but I cannot transform it)
ActionScript Code:
var fileRef:FileReference = new FileReference();
MovieClip(root).loadBtn.addEventListener(MouseEvent.CLICK, openClick);[code].....
I am using senocular's transform tool AS3 in one of my projects.I am having a problem in customizing the tool, I need the movieclip to be drag only with in a rectangle.
View 2 RepliesDoes anyone has a modified version of this awesome tool that can limit the dragging of the objects to a given area? me in the right direction on how to accomplish this, which class i need to modify.
View 1 RepliesI'm using Eclipse and I'm wondering what the best Eclipse/Java/Flexbuilder code review tool is. If it matters we're using SVN as our SCM. Here are the following I've come across: Jupiter - seems like it's been around for awhile it looks like there is only a single developer on the project and the documentation mentions rather old versions of Eclipse IBM's Collaborative Code Review plugin for eclipse - seems like its a proprietary code review tool so not sure it will be supported in the future (or have the ability for a community to assist in development). Eclipse COLA real-time shared editing - Not really a code review tool but more a way to view/edit files peer-to-peer style allowing code review like collaboration. Check out this video demonstration of COLA.
View 7 RepliesI'm having a little trouble using URL links in text. If I select a part of the text and give it a URL link (I'm using mailto: links here), strange things are happening to all the text in that text box at runtime in some cases the leading changes, other times some or all of the text disappears. But it only happens at runtime, so I have no way of knowing if or how to compensate. And simply removing the offending link or linked text doesn't fix the problem once the link has been created the only way to fix it is to create a new text box with no links.
View 4 Repliesafter i done all the animations and i want to paste it another fla. the movie clip animation positions not in the stage anymore, after i click on the timeline of the movie clip, it set path the movie clip to -8000+ X and Y. even i want to set to any number, it pop out invalid position. i have to use mouse drag the number back to position that i want. it's totally drive me crazy... really unstable.. sometimes i open back my fla, the movie clip position run too and i need to use transform tool double click set back to 0.
View 3 RepliesI am using the senocular transform tool for scaling, rotating etc... skew is disabled in the tool. I Have tried many ways to flip the display object horizontally and vertically. he function I am using is given below. It works fine when the display object is not rotated. When it is rotated and then flipped it outputs a skewed inverted display Object.
function flipHorizontal(dsp:DisplayObject):void
{
var matrix:Matrix = dsp.transform.matrix;
matrix.transformPoint(new Point(dsp.width/2,dsp.height/2));
[code]....
