Professional :: After Encoding In Flash Video Encoder (with Adobe AIR) The Interlacing Does Not Appear?
Feb 1, 2010
I am having an interlacing issue when I load my .flv files up to my site.The strange thing is that when I watch them after encoding in Flash Video Encoder (with adobe AIR) the interlacing does not appear. I can't understand why the interlacing issue would appear once the videos are loaded up to the site and yet they look perfectly crisp and clear when I watch the completed .flv's in AIR. I didn't de-interlace the videos the first time I created the .flv's but that shouldn't matter since they play fine in AIR right? Of course I can go back through and de-interlace them, but I want to make sure that this is the problem before I take the time to re-encode them all.
View 1 Replies
Similar Posts:
Jan 6, 2011
I keep getting "An internal application error occurred" when I put in my video. (MPG) Running Windows XP The Encoder at work does not work but the Encoder at my house does.
2011-01-06 11:44:37 : ENCODING FAILED- Source file: M:UIVI_Video20110104145741.mpg- Output file: M:UIVI_Video20110104145741.flv- Video codec: On2 VP6- Alpha channel encoded: no- Deinterlace: no- Frame rate: 0 fps- Key frame interval: 0 frames- Video data rate: 400 kbps- Width: 0 pixels- Height: 0 pixels- Audio codec: MPEG Layer III (MP3)- Audio data rate: 96 kbps (stereo)- FLV duration: 00:00:00- Encoding time: 00:00:00
View 1 Replies
Jan 26, 2011
I'm trying to convert a WMV file into Flash. I know that this can be done using DW8's Flash Video Encoder ....but it seems this function is no longer availabe in CS5.
View 1 Replies
Nov 14, 2011
I want to stream a 100 minute video from my desktop machine to the internet using Adobe flash media encoder only.
1. Can i stream just using the flash media encoder or do i also need a server?
2. is it possible to run the flash media encoder on a server on windows XP or do i have to have windows server 2003 installed.
View 9 Replies
Jul 8, 2009
I have a problem understanding the bitrate settings when trying to encode an FLV for Flash 8 or higher, using two passes. When you choose to use two passes, you are presented with a bunch of different options, including "Minimum Bitrate [%target]", "Maximum Bitrate [%target]", and "Bitrate Variability [%target]". These are not really explained properly in the online manuals I've seen out there. Let's say you want to have a Costant bitrate (CBR) of 900 kbps, and you want to have two encoding passes, what do you set the other sliders to?
The defaults are:
Minimum Bitrate [%target] 80
Maximum Bitrate [%target] 120
Bitrate Variability [%target] 80
View 8 Replies
Feb 1, 2010
I having difficulties importing a .mov file into Adobe Media Encoder that came with my Flash CS4 Professional program
I am receiving an error telling me that the file could not be imported.I have QuickTime installed on my PC. The media encoder recognizes the file but is having problems importing the file. Error code is : g:PRIVATEJVCCQAVCLIP68_01.MOV could not be imported
View 1 Replies
Mar 4, 2009
I have a mp4 file that has a resolution of 640 x 360 pixels.When viewed in VLC it looks natural and in proportion. I simply want to convert the .mp4 file to an .flv file for web distribution maintaining the existing dimensions. I am attempting to do this with Adobe Media Encoder.The problem is that Adobe Media Encoder insists on converting the file to a 4:3 aspect ratio with a resolution of 480x360 pixels.Viewing the output in VLC results in a squashed out of proportion image. The output preview in Adobe Media Encoder also looks squashed.When I select the option to specify the output dimensions and manually set the resolution back to 640x360, in then adds to solid black bars on the right and left-hand sides of the video which is undesirable - aswell as making the video squashed. I have messed around with every setting and have had no joy in producing the output I require.I have a command line version of ffmpeg which is able to convert the video successfully (keeping the correct aspect ratio) using the most basic command: ffmpeg -i input.mp4 output.flv . I don't want to resort to using ffmpeg at this point. I just spent $1200 AU to upgrade to CS4 Design Premium and want to use the nice GUI I just paid for :)
View 1 Replies
Mar 11, 2011
Flash 8's video encoder, use to let you crop (cut x amount of pixels out) and then resize a video (and in that order it did it). CS5's Media Encoder is confusing, from what I can tell it cannot do both, you either can crop or resize but not both. ANd if you can do both, you definately cant crop before the resize. So which is it? Resizing made sense last, because you could put in new values for the resize nad figure out how much you need to crop out.
View 4 Replies
Feb 8, 2011
I'm on a macbook pro, osx 10.6, using CS4 Web Premium. I used to have an external monitor hooked up which had much higher resolution, so when using Adobe Media Encoder I'd click the Settings button on a video to get the Export Settings window, then stretched the Export Settings window to be the size of my external monitor. Now, I'm just using my laptop, and the export settings window does not have the resize buttons at top left to adjust it back to the size of my laptop, and the bottom third of the export settings window is getting cut off so I can't see the cancel/ok buttons etc.
I've tried re-installing media encoder (via reinstalling flash using the CDs) to try to 'reset' the window sizes, didn't fix the problem. If anyone knows of any other preferences or something I could delete to fix this,
View 14 Replies
Jul 29, 2010
I have been encoding 1920x1080i mov files (h.264/aac) to 1280x720p (vp6/mp3) flvs.However, when I add older HD content into the AMC que, content with non-standard presets, the program hangs.I tried to import about 15 files last night and the program just sat there all night in a 'NOT RESPONDING' state.The video's have different audio and video settings and it's little difficult to pinpoint exactly what they were.Some are 1440x1080, some are 1280x900, some have PCM audio some of mp3.Now I temporarily resolved this issue by simply using cs4 master on my mac pro which worked great.However I have noticed a huge speed increase in CS5 64bit AMC.It takes 2-3 hours to encode 1 flash video on my mac pro (dual quad core xeon 2.9Ghz/32GB ram) with CS4.It takes ~20 minutes on my windows 7 station (single core 2 quad 3Ghz/8GB ram) with CS5.
If I drop a single file into the AMC CS5 que, regardless of the resolution, frame rate, or sound codec; it will import.If I then add another file with a different resolution AMC will hang and become non-responsive.It never crashed but I can't wait 12+ hours to see if it accepted a job or not.As I said before this problem was not observed on CS4 for mac it worked flawlessly, albeit a little slow.[code]
View 1 Replies
Sep 5, 2011
I read that it is best to de-interlace video "at the hardware level" before sending it to FMLE 3.2 for encoding. I have looked and looked for a software or solution but can't find anything that I can work. Is it best to de-interlace before sending the video to FMLE? I am streaming live video that needs de-interlacing before sending to our site. I know there is a "de-interlace" option in FMLE 3.2 but read that it was better to de-interlace the signal before sending to FMLE. I found something called DScaler but don't know how to get the video from DScaler into FMLE 3.2.
View 1 Replies
Feb 11, 2011
Given:I encode video at 600kbpsI set the video to display by default at 448x336 (4:3)Users can set the video to display at full screen (let's say full screen = 1280x960)I can only provide one video resolution to cover all scenarios .Is there any logic to encoding the video for the larger size of 1280x960? Am I wrong in thinking:
Video encoded at 1280x960 and displayed at this size will look better than video encoded at 448x336 and enlarged to 1280x960; andThere will be minimal difference between video encoded at 1280x960 (and shrunk to 448x336) and video encoded at 448x336.
View 10 Replies
Nov 7, 2008
I have a 720x576px clip (anamorphic), which I want to encode into a flv with the right aspect ratio (720x405px). In the new flash media encoder, you have three settings.
- Scale to fit
- Black borders
- Change output size
But none of those settings allows me to stretch the video to the right aspect ratio, I always get the file with 720x405, but black borders left and right.
View 6 Replies
Feb 3, 2010
In Adobe Flash CS3 Profesional and when I start the Flash Video Encoder I get the following message: "A required system library did not initialize properly. Please ensure you have DirectShow 9 and QuickTime 7 or higher installed on your system."
View 2 Replies
Dec 28, 2011
For some reason I am unable to create a FLV file from a MP4 file with high bitrate. I even created a custom setting and specified bitrate as 2500 but the output file is always around 775.
View 9 Replies
Oct 27, 2009
I installed Flash CS4 a couple of days ago. Trying it out for the first time today. I went to import a video & got a message: "The required version of Adobe Media Encoder is not installed or the installation is damaged. Please reinstall."
I'm showing a Media Encoder CS4 folder under my Adobe folder, so I assume I've got the latest version installed, but it's a corrupt installation & I need to reinstall. My question is: do I need to redo the whole Flash CS4 installation? The reason I ask is that our IT provided me with multiple files for the install - there's ADBEFLPRCS4Win_LS1.exe. That's for the main install. But there's also a ADOBEFLPRCS4Win_Cont_LS1.exe. That's the added content file. I don't want to uninstall/reinstall Flash if I don't have to. Does anybody know if Media Encoder installs from the main Flash installation file, or from the added content installation file?
View 1 Replies
Feb 22, 2010
Are there any standard practices for Video encoding, streaming, etc?
View 1 Replies
Oct 6, 2008
I've been using the flash video encoder to convert videos to FLV to put on websites. Today I converted a MPG file to FLV. The original MPG video worked fine, the FLV file played sound but no picture..
View 1 Replies
Jul 22, 2009
I have managed to put some captions on a video file and would now need to get this video back into flv format to put it online;..I tried with the cs3 video encoder but it wouldn't let me.... So my questions are:
1. Is it actually possible to convert my swf file into flv with cs3 video encoder ...which would be logical as it is a flash file...
2. What is the best option I Have to convert my swf file with captions without losing the captions...
View 2 Replies
Dec 14, 2011
I want to make an animation over live action footage, I've looked on the guides and the ones which explain what I need to do are for previous versions of Flash and don't work on CS5.I'm wondering how I can import a video in to Adobe Flash CS5, so that it plays in the timeline frame by frame? I dont mean putting it on one frame so it will play, but so i can edit objects over the top of the flash in each single frame.
View 1 Replies
Aug 1, 2011
I need to perform encoding of a wav file into base64...
View 2 Replies
Aug 7, 2011
Smug video by Adobe, hand the enemy more ammo against Flash?
View 2 Replies
Feb 3, 2009
Does anyone else have problems encoding WMV files into FLV using Flash Video Encoder? Mine almost always crashes in this situation and was wondering if this is common.
View 1 Replies
May 22, 2009
I'm having a bit of trouble with flash cs3 video encoder. I'd like to encode some mpeg files to flv but I keep getting errors when trying to encode. The mpeg files are raw imported from my dvd video cam. I'm guessing they are mpeg-2 720 by 480 res. Quicktime files encode fine but I haven't tried any other video types. I thought it was a codec problem as all I use is vlc for video. So I tried k-lite codec pack nut no success, same errors. Just wondering if anyone had any advice. I suppose I could encode my mpeg files to mov first? But what encoder would I use to keep high quality?
[Code].....
View 7 Replies
Sep 18, 2008
I'm trying to compress a video into an flv for my flash file. When I compress the video using flash video encoder the video shows up white but I can see the audio. The original version is compressed using H.264. I don't know enough about codecs to know why its not showing video.
View 1 Replies
Nov 20, 2008
I'm having trouble getting the Adobe Media Encoder CS4 to work properly. I have tried multiple files of different lengths but end up with the same output. Nice video encoding, but the audio starts and then cuts out after a couple of seconds. The longer the video, the shorter the audio works. The logs don't report any
issues.
View 3 Replies
Jun 23, 2009
Can flv files be different and kinda awkward, if their produced in older or newer version of flash video encoder? Or anyoher software programs that can convert to the flv format? If so, have any of you folks come across an easy way to fix?
View 1 Replies
Oct 26, 2010
fix bug in your MAX video player. Visit[URL]..online/tuesday/I have error dialog at Adobe MAX online page (flash player).I have FlashPlayer debugger. It show error when all loadings is done (only one time). I just click "Dismiss all" and error dialog is never appearing.
[Code]...
View 1 Replies
Jan 20, 2010
I am experimenting with video using the alpha channel capability of the FlashCS3. I followed the tutorial on the gotoandlearn website on how to create chroma keyed video. I exported an avi video file having removed the background. Ive used Flash video encoder for VP6 and flash player 8 with encode alpha channel ticked. However my swf is not showing the video, just a white blank where it should be. It puts out the audio only.
This is the log file.
FILE SUCCESSFULLY ENCODED
- Source file: C:downloadsflash greenscreenvideoscreentestalpha.avi
- Output file: C:downloadsflash greenscreenvideoscreentestalpha2.flv
- Video codec: On2 VP6
- Alpha channel encoded: yes
- Deinterlace: no
- Frame rate: 25 fps
- Key frame interval: 50 frames
- Video data rate: 40 kbps
- Width: 720 pixels
- Height: 576 pixels
- Audio codec: MPEG Layer III (MP3)
- Audio data rate: 16 kbps (mono)
- FLV duration: 00:00:10
- Encoding time: 00:01:00
View 1 Replies
Oct 16, 2009
How can I do to encoder a video using FMS3?
View 4 Replies
