Professional :: Animated Preloader - Fill A Swirl Shape (attached) Based On The Amount Loaded?
Aug 17, 2009
trying to create an animated preloader.how to do a basic bar preloader but what I want is to fill a swirl shape (attached) based on the amount loaded.I can easily enough create the movie clip where the full outline is there and then it fills up but I have no idea how to turn that into a preloaded and have it fill based on the percent loaded. Am I correct in assuming I can't use a mask because of the irregular shape?
Attachments:
preloader.jpg
(22.6 K)
View 22 Replies
Similar Posts:
Jan 31, 2010
I draw a shape with the pen tool in Flash CS4. I made sure the shape was closed. But, I cannot fill the shape no matter what. Paint bucket tool does not work. Whatever I do, I get the red diagonal line on the fill color. I can fill a shape with the rectangle or oval tools but not the pen tool.
View 7 Replies
Sep 24, 2011
When I draw a path with the pen tool, and fill it, it seems as if the shape now has two parts. If I drag the filled area around, it's breaking apart from the path (or border). So how can I make this one entity?
View 3 Replies
Sep 4, 2009
I am needing to create a preloader that advances a 10 frame animation every 10% loaded. So there will be a percentage indicator (dynamic text) and a short animation as the load bar (10 frames). The animation is of tape winding into a tape measure, and when it's fully inside the loading is complete and timeline moves onto next frame. I have been able to do this with AS2, using a combination of (stop) and (play) commands whenever the next 10% was loaded.
[Code]...
View 1 Replies
Mar 8, 2012
I'm looking to do a preloader for my site, what I want to do is that the user sees the percentage loaded, but instead of the typical bar filling up, I want dots to fill the screen. Each dot would appear with each percentage loaded. So for example, if its on 5%, there would be 5 dots, when it moves to 6%, another dot would appear on the screen. So in the end there would be 100 dots/circles on the screen. maybe say in a 10 by 10 grid. I know how to make the percentage loaded appear, but have no idea about the dots.
View 5 Replies
Feb 11, 2012
I have been having a serious issue with custom video where flash is saying that the amount of the video so far played is MORE than the amount that it has downloaded, which is clearly impossible. This results in various problems, such as the playhead (scrubber) moving past the end of the loader bar. I posted a simple demo that displays the amount loaded and the amount played in text fields. You can see it at: [URL][Code]...
View 5 Replies
Feb 11, 2012
So I have been having a serious issue with custom video where flash is saying that the amount of the video so far played is MORE than the amount that it has downloaded, which is clearly impossible. This results in various problems, such as the playhead (scrubber) moving past the end of the loader bar.I posted a simple demo that displays the amount loaded and the amount played in text fields. You can see it at: URL...[code]I encoded the video at a high rate so that it would download slowly. It may not playback smoothly, which I am not concerned about. What I am concerned about is the numbers below the video what are derived from ns.bytesLoaded and ns.time. If you watch it for a bit, the amount played should exceed the amount loaded.
I double checked the video duration and the bytestotal that flash is reporting and they are correct. I don't know of any way to check the accuracy of bytesloaded.If your internet connection is super fast, you may not see the issue - it only occurs when it is playing back faster than it is downloading - if this is the case, you may need to throttle your speed down, or start downloading a large file while you are watching this demo in order to see the issue.But this is a serious issue and means that building custom video interfaces with loadbars and playheads is impossible!
View 1 Replies
Jul 13, 2009
1. I selected the Rectangle tool, and made sure Object Drawing Mode was not selected.
2. I picked colors for stroke and fill, and drew a rectangle.
3. I clicked the Selection tool, then dragged around the rectangle to select all of it.
4. In the Property Inspector I clicked the fill color icon. I clicked the square with the slash, to designate no fill. The fill disappears.
Everything has worked so far. But now I decide I want a fill color after all. I select the shape again. But clicking the fill color icon in the Property Inspector and the Tool panel has no effect on bringing a fill color back to the shape. I can't figure out how to do that.
Actually, I could restore the original fill color using Undo, or the History Panel. But it seems there must be a way using the Property Inspector.
View 2 Replies
Mar 29, 2009
I have 100 names. I want to have it animated like the genname.fla I attached.And it should show these names when I mouseover it, in completely random order.Like the namebanner.fla I attached.I don't want the flash swf to get too large in filesize or the animation playing choppy.
How do I implement all these names (with animation) with coding in AS2 instead of timeline and labels?Without using external files xml, swf, txt.My solution I chosen is to have Labels (label1, label2..) in my timeline and I have now 30 labels, 30 movieclips+30MC:s in every with the name animation. It is so hard work to copy label, motion, convert new movieclip and do this for 100 names. Maybe I need 200 names.. This is impossible to sort out.
Every name must have the same:
- animation: movement, speed, blurfilter
- font
I need to be able to change:
- the name (firstname, lastname)
- animation (blurfilter, where it should start animate and stop, how fast..)
And I need to be able to change the font so It changes in every name so I don't need to go into every movieclip and change.
I have following code:
Code:
//random
function fncShuffle()
{ return Math.floor(Math.random()*5)-1; }
//function for every label on the timeline
[code]....
View 2 Replies
Jan 6, 2010
Is there a way to have a pre-loader based on a single movie clip, instead of on the entire SWF size? This movie clip may have a single graphic, but the entire movie has a slideshow with more images to display...but rather than making my visitor wait for the entire site to download before they see anything, I'd like to have it so when that graphic is loaded, it displays while the rest of the movie finishes loading. And there would be a preloader that shows the progression of the single movie clip.
View 3 Replies
Nov 12, 2011
I'm looking for an AS3 version that dynamically populates this shape and allows for difference in font size to give it some more variety and flavour. I've got some examples of tag clouds but they don't accept a shape as its outer bounds and I've found some that allow for a shape but don't account for dynamic resizing of the text. Even a nudge in the right direction would be all I need and I can go from there.
[URL]
View 1 Replies
Jun 4, 2009
How do I make a picture available to be used as a fill for a shape?
View 2 Replies
Dec 12, 2010
I am currently learning to use flash and i am following the ebook guide. On lesson 2 at the end, it requests you to select a complex shape, go to the bucket option and change the fill colour to dark brown. I tried that but the fill option has a red line across it and it cannot be selected. I need to complete this step if i want to finish lesson 2. I tried different things but it seems like the shape cannot be edited. I looked and it is not locked.[url]...
View 2 Replies
May 2, 2009
How do I draw a square shape with a gradient fill in AS3?
View 3 Replies
Oct 27, 2010
I'm trying to fill shapes with text.
These shapes are pretty complex (i.e. they're not square, see image below).
So far, I place textfields manually on the stage and populate them one by one with strings (names) stored in an array. (The textfields are also in an array).
The example below is very simple and I will probably have to setup a good few hundred textfields in the final project.
Would anyone know of a way of populating these textfields dynamically according to an underlying shape?
Or maybe a different approach altogether?
I was thinking collision detection might be an idea but not sure where to start.
PS: I cannot simply use a mask over the chunk of text as each character shall be visible within the shape.
[URL]
View 14 Replies
Oct 27, 2009
I would like to edit the shape that the bone structure is manipulating and i can't for the life of me figure out how. Double clicking does nothing, right clicking offers no useful menu to get into my shape and edit. Looking back I wonder if I should have turned my shape into a movie clip before adding the bones? But Flash didn't stop me and I assumed I could go back and edit later on.
View 1 Replies
Feb 2, 2009
Can it be done in flash with some of the glow filters? Or is this probably being created in something like After Effects or Motion and then being pulled in as JPEG StillsI've looked through some tutorial sites, but most of the animation tutorials are pretty basic... and I'm not sure what to really call the effect...making searching for tutorials or forum posts a bit tricky
View 5 Replies
Sep 8, 2010
Somehow, I've been unable to figure out exactly how to do this, even though I suspect it should be dead simple! All I want to do is read the colors of the fills & strokes on some objects I've imported from Adobe Illustrator. They have very specific colors applied to them, such that I can parse them (hopefully!) and know what to do with the objects based on their unique color.
View 7 Replies
Apr 11, 2012
For example, I have a transparent png file, the shape is a car.In the png file, I only draw the white border shape.Outside and inside the border are all transparent.
I want to use actionscript3 code to show the car object with different color, it means only fill color inside the border, and for the outside of the border, keep transparent.How to do that?
So far, the simplest workaround is to prepare many images with PhotoShop, but it's not good enough for me. When I have many shapes and use many colors, I've to prepare many many images.Add more details:(Because I'm using white border, you may not see the basic png file if your background of browser is white)
View 2 Replies
Aug 24, 2010
Say I draw a square on the stage, with a fill of blue and a stroke of black. My width and height are both the same. Now, in my Actionscript, I want to change that blue fill to something else.... on some off the wall condition of course.
Better yet, imagine I draw this extremly elaborate polygon out. How could I change it's fill, dynamically, in Actionscript (AS2 preferably, but I'm just lookin' for logic here)
View 1 Replies
May 11, 2009
how to take a display shape, and have the lines & fill randomly change colors? I'm sure this can be done
View 1 Replies
Sep 1, 2006
I have been tyring to export an animated banner, in animated.gif format. it's a simple animated text with no gradients. it should go on top of a graphic which has some gradients and is multi-coloured and with effects (the colours are similar to the one/i used in the page) as you can see here the text looks a bit funny.url...
View 3 Replies
Jan 5, 2010
I've noticed that some programmers animate objects based on the difference in time. I am not sure why or even if this is logical. Does anyone know the significance? Below is a snippet of code that explains what I mean:
[Code]....
View 6 Replies
Nov 9, 2010
After site is loaded a 100% it is stuck on the preloader image in frame one instead of going to frame to of my project.
I suppose further information about my project is needed so just say what to post and IŽll post it.
View 12 Replies
Jul 19, 2011
I have a site that is fairly complex, but was using a massive amount of CPU power, even when sitting idle on a page with no animations. I went through everything with a fine toothed comb, and couldn't find the culprit.So I just started removing layers one by one, until I found the one causing the problem.
Turns out it was a layer with an animated mask. I have a large black recatangle, that I converted to a mask, and then used a shape tween on it. Once that was triggered. The CPU usage went up 65-75%. Even when the movie was stopped on a frame that that mask didn't exist on. Once it was triggered, the rest of the time you are on the site the CPU usage is through the roof. I can do to fix that. Is there some other way I should build an animated mask?
View 9 Replies
Jan 2, 2011
I have a preloader that I downloaded... What I want to do is have this load only a certain percentage of the move before it continues to play the file.I assume that I have to edit the line of code that gets the total amount of bytes for the file itself... expressed below:
Code: Select alltotal = this.getBytesTotal(); // Movie Length
Since the variable is 'total' how do I make it load only 25% then start? I
Code: Select alltotal = this.getBytesTotal(25); // Movie Length ?
Code: Select alltotal = this.getBytesTotal() * .25; // Movie Length ?
View 1 Replies
Jan 20, 2012
Am I completely hallucinating or what ? That's several years I'm working with Flash, and today, i want to do the simplest animation ever, and it just doesn't work....I want to mask an animated clip with an animated mask (a shape animation), but every time the mask arrives at a keyframe, the clip restarts to the frame 1 !!I added a piece of code to see at which keyframe it is blocked, and at every mask keyframe, the code says 'TypeError: Error #1009: null property..
View 2 Replies
Jun 22, 2010
Whenever I add shape hints to a shape tween the shape disappears in the between frames. I am using CS5 on Vista. I using files from [URL]to practice.
View 2 Replies
May 27, 2010
I have a CS5 FLA file with AS 3.0 with the following code for the preloader:
var pct_load:int = Math.round(framesLoaded/totalFrames*100);
if (pct_load == 100) {
play();
[Code]....
The preloader is in the first four frames -- it's just the background photo, a graphic logo, and the loading numeral text.
Everything runs great the first time it's loaded; then if you refresh the page, the graphics in the first four preloader frames flash on the screen before the movie plays.
View 5 Replies
Jun 16, 2003
Hoping someone can point me in the right direction with this. Instead of creating a button and nesting movie clips for each state, I'm trying to script an animated button of a square (no fill) where on rollover the stroke color changes from one color to another (tweening the tint). I want to do this to the button symbol so it's the same for all instances. Is this possible or do I have to go the button > nested MC route? Sorry if this is lame...it's been awhile since I've used Flash and I've forgotten quite a bit.
View 7 Replies
