SWF Intermittently Plays Wrong Audio
May 16, 2011
I created an interactive exercise to teach music. After the correct answer is given, the user has the option to click on a button and hear a specific sound (a chord played on the piano). The sound button appears only after they give the correct answer, and they can click on it as many times as they want. There are a series of these exercises, each one on a different frame and each one with a different sound.The sound files are called in the button code.
Here's the problem. In some of the exercises, if I keep clicking on the sound button, it plays the correct sound about 20 times in a row but then it will suddenly play a different sound (a chord from one of the other exercises). Then it goes back to playing the correct sound.
View 3 Replies
Similar Posts:
Oct 12, 2010
I have been running FMIS 3.5 since April of this year. In August, we started recording conferences, but I'm not sure that this is the issue. We are under very low load at the moment. We never have more than one conference going simultaneously. Our server is spec'ed with a 64-bit operating system (MS08), 24GB RAM, and 24 processors.I notice that in some of our conferences, the video and audio freezes for 5 to 10 seconds. Then they recover and resume where they left off. When this occurs, it recurs every one or two minutes, which is very disruptive.People have to constantly repeat themselves.
FMIS is configured with defaults out of the box, with the exception that we are recording live video and audio. How do I solve a problem like this? Is it Internet latency? Is it our internal network? Is it FMIS 3.5? Not sure where to start.Now I've inherited much of the Flex 3 code that is used in the stream and player Flash components. I notice in the player component that the original programmer is using a timer to monitor the mx.Event.VideoEvent.STATE_CHANGED event. As long as the event fires, he resets the timer. But if 10 seconds expires and the STATE_CHANGED event has not fired, he restarts the player. Is this a valid methodology? Here is the code fragment.
<mx:Script><![CDATA[var lastUpdate : Number = 0;private var pulse : Timer = null;
private function onInit() : void {
viewVideo.addEventListener(VideoEvent.STATE_CHANGE, function() : void { if (!lastUpdate) { pulse.start(); }[code]....
View 2 Replies
Jan 4, 2010
I have a captivate generated SWF file which has a .FLV inside it.In flash on click of a button I unload the movie(SWF), the video goes away but the .FLV still plays the audio.
View 2 Replies
Jul 16, 2009
I have as3 script that loads an external swf which contains flv video:
[Code]....
The movie clip is removed but the audio continues to play. Why is this? What can I do to make sure the audio is removed also?
View 10 Replies
Jul 30, 2009
this one is really doing my head in and any advice (even vague thoughts) would be really great.I have an FLVPlayback component on the stage and I am loading 8 FLVs in to 8 separate video players within it. I then play the first one and when it ends I randomly select which to play next.Everything seems to work fine except that each time I run it one or two of the clips play back with only audio only and no video. It is not the same clip each time but whichever one it is will consistently fail to playback untill I re publish when it chooses a differrent clip to fail on.I am publishing for FP8 from CS4 on a Mac and it fails when I test movie as well as in FF and Safari.
If anyone has any ideas on this at all please shout them out or I am heading for the forrest never to return
View 3 Replies
Nov 20, 2011
I have a few invisible buttons that link to URLs, and when clicked open the new URL in the same window and plays a sound.
Sadly, the URL loads before the sound is finished, making this pretty lame.
How do I ensure the full audio plays before the new URL loads?
View 13 Replies
Jan 4, 2010
I have a captivate generated SWF file which has a .FLV inside it.In flash on click of a button I unload the movie(SWF), the video goes away but the .FLV still plays the audio
View 6 Replies
May 9, 2010
Im making an animation to describe how a potential iphone app would work. Its going to be a 3 min clip not interactive at all, just plays right through showing how it would work. This is not for web. Just for presentation purposes.
By problem is this: Within the timeline, i need to embed a 20 sec clip (with audio) the plays automatically and when it ends the rest of the animation continues. I cannot for the life of me figure out how to do this without the audio and video being all messed or the video not exiting the screen once its finished. I hear all this talk of action script but have no clue where to start.
View 1 Replies
Mar 29, 2012
Installed the new flash player and all of a sudden my flv audio no longer played in an existing media player built using the FLVPlayback component.
Finally figured out that if I change the FLVPlayback component parameter "maintainAspectRaion" from false to true, the audio will play.
View 11 Replies
Apr 2, 2012
Audio flvs that previously would play fine no longer play. I get "NetStream.Play.Failed".This occurs when progressively playing over HTTP, i.e. starting NetConnection.connect(null) and then NetStream.play("http://url_of_my_flv");Regular RTMP playback still works.So, I've seen two posts with similar issues in the last day or so:
View 1 Replies
Jan 14, 2009
how to get flv's to load up dynamically using xml - it all works well apart from this one problem that i have.
when the thumbnail for the flv is clicked the preloader appears and the flv starts to load - but for some reason the audio begins to play almost immediately - then when the flv actually loads then the audio plays again whilst the initial (unwanted) audio carries on playing!
this is the script for the netstream:
[Code].....
View 1 Replies
Nov 21, 2010
In my main swf file i load external swf files for each section.. In my video section i load a swf that includes a flv player that plays flv's with sound!
when i go back to menu...or go to another section....sound is still playing! why? I was thinking maybe i need to add a stop all sounds actionscript when going back to menu?
View 5 Replies
Jul 8, 2011
I am trying to display local flash swfs in the WebView. I have WebView set up and it will happily display local HTML files, but when I try to display Flash, the screen is blank. The flash file is running as I can hear the audio. I have noticed that most swf players from the android market suffer the same issue.
View 2 Replies
Apr 9, 2005
I am currently using to in a sound player in an on the homepage of an html/asp website. At the moment it plays some welcome audio when the visitor arrives on the site (index.asp), however it does get an little annoying when it plays everytime you go onto the homepage.
Is their any way of setting a session variable in actionscript that only plays the audio once when using the site?
View 1 Replies
Sep 26, 2007
I have a swf that advances through a series of frames by pressing any key. I am trying to set up a timer so that on idle (no keypresses for X sec), it plays an audio clip.
My AS below works fine, but if you press keys very fast it seems to get out of sync and plays the audio almost randomly (at least faster than it should). Does anyone know what might be causing this? BTW, I have tried using a keylistener which seems to make it even worse by affecting the volume level randomly.
//ON THE INITIAL FRAME...
myInterval = setInterval(callback1, 20000);
function callback1()
[Code].....
View 1 Replies
Jun 10, 2010
I have a Flex app that uses Flash Remoting and the RemoteObject to pull data from a ColdFusion CFC. About 75% of the time it works, but the other times I get a message using Charles (a debugging tool) that says faultString = "Unable to Invoke CFC". FaultCode = "Server.Processing".
Here's my RemoteObject:
<mx:RemoteObject id="carsSvc" destination="ColdFusion" source="ca.sqmIDash.cfc.sqmIdash">
<mx:method name="getCARs" result="resultHandler(event)"/>
</mx:RemoteObject>
The server set up on our web farm is to use load balancing. I'm not sure if this is causing the problem or not. Probably not, but it's a thought.
View 1 Replies
Dec 28, 2010
I have created a moviecliploader that loads an external SWF and has player controls. I have a slider that moves with the movie, which works perfectly with cc_1.swf, but will not move with p_2.swf. The code below shows how the movie is loaded and how I update the x coordinate of the slider. Also, the attached zip file contains the fla and both swf movies.
Code:
//Working: cc_1.swf
//Not Working: p_2.swf
//Load Movie
var myMCL = new MovieClipLoader();
myMCL.loadClip("cc_1.swf", _root.container);
[Code] .....
View 7 Replies
Aug 18, 2009
I have two classes. One creates a class and the second one plays audio related to the class. When the user clicks the right answer the quiz gets removed from the stage, but my audio keeps playing. I am wondering how I remove/kill the audio class/object at that point.
My class gets created like this:
private var quizAudio:CaseStudyQuizAudio;
and further down:
quizAudio = new CaseStudyQuizAudio(theAudio);
When I tried to kill it, I was think this would do, but to no luck so far:
quizAudio = null;
delete quizAudio;
How is this done?
View 3 Replies
Jan 6, 2011
I have a Flash movie that behaves as follows:Movie loads > tries to load an XML file using URLLoader.load() > uses the data in the XML to load some images into the movie.The requirement was for updates to the XML file to be picked up within 10 minutes, so I have added a querystring parameter to the XML URL which is a timestamp to the nearest ten minutes, e.g.1-40**This all works for me as expected in IE and Chrome, and it works locally for me in Firefox. However, on our production server (IIS) in Firefox, the following behaviour occurs (by observing Firebug):First load:SWF loads > XML Requested and loads > images requested and loadSubsequent page loads:SWF Loads > no request for the XML (no request shown in Firebug)Firebug shows the following information about the XML file from the first successful request:
Response Headers
Cache-Control max-age=31536000
Content-Length 640
[code]....
View 1 Replies
Dec 11, 2011
I want my flash file plays one and stops in the end and only plays again if play again button is pressed.How do i do it?
View 1 Replies
Aug 6, 2010
If I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 Replies
Aug 30, 2011
I want my movie to loop. Would prefer an If/Else loop so that the movie plays a certain number of times then plays the opening of a screen then stops. This is a simple 4 screen ad I am doing for a school project. Can't get it to work. I tried containing my code in the proper loop syntax, didn't work. Then wrapping the loop in a function and calling that with a timer event, didn't work. My final solution was to call my whole movie in a timer event set to play once. Then calling the entire movie again in a second timer event set to play 20 times and set to start at an interval when the first movie ended. This did work but each time the movie plays thru function calls drop off making the movie degrade.
[Code]....
View 5 Replies
Aug 25, 2009
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
View 8 Replies
Mar 11, 2010
Anyone know of a skinnable audio player (or something similar to Windows Vista audio control in task bar) that i can embed in my website?
A player that can be customized to use a 'speaker' icon instead of a 'play' icon. When the speaker is clicked, the volume can be adjusted or turned off. The option of being able to autoplay and set the default volume level.
View 1 Replies
Aug 4, 2009
I am converting from .FLV's to .F4V. Video outputs fine but the audio sound stops after a few seconds from the beginning.I have tried many different settings for the audio with no luck. Also, tried on a colleague's machine who is running CS3, which works fine, so something is buggy in CS4...
View 1 Replies
Mar 11, 2010
Because the player optimizes framerate, antialiasing etc dependent on the performance capabilities of the platform upon which it is running, it was nearly impossible to ensure animation syncronization w/ audio. If the audio were on the timeline you could set sync params to stream, but if the audio is loaded programically forget it .. well until AS3 ..The following code throttles the player framerate to lock step the animation to the audio .. not perfect but the principal works ..
View 1 Replies
Sep 6, 2011
Let me first establish what I want to do:My user is able to record voicenotes on my website, add tags to said notes for indexing as well as a title. When the note is saved I save the path of the note along with the other info in my DB.Now, I have 2 choices to do the recording, both involve a .swf embedded in my site:
1) I could use Red5 server to stream the audio to my server and save the file and return the path to said file to my app to do the DB saving, seems rather complicated since I would have to convert the audio and move it to the appropriate folder that belongs to the user in a server side Red5 app, which I'm not very aware of how to build.
2) I could simply record the audio and grab its byte array, do a Base64 encoding on it and send it to PHP along with the rest of the data that is necessary (be it by a simple POST or an AJAX call), decode it on the server and make the file with the appropriate extension, audio conversion would also occur here using ffmpeg, this option seems simpler but I do not know how viable it is.
View 1 Replies
Apr 1, 2012
Is there a way to stream and audio line level feed rather than the audio from a computer's microphone?
View 1 Replies
Aug 25, 2009
I have an audio player that has a custom timeline and playhead. I am using a start and stop drag to move in the time line but the only way i can make it work is to have it play when ever I release the play head. I would like it to stay stopped if the player is paused and play if the player was playing.
[Code]...
View 5 Replies
Oct 25, 2009
The images for animation load okay. The sound loads okay. But the animation images need to be inserted in coordination with the sounds, which is difficult using only the ears There is a visual graph of audio levels in the library window, which I have seen appear in the timeline also but only momentarily. I do not know how to keep the audio graph on the timeline so as to know where to put the images. I can keep the graph open on the little library window when it is open but not on the timeline. how to keep the graph open on the audio track while I work on the image tracks.
View 1 Replies
