Separate FLV Video And Audio Tracks In FLV Playback Component?
Jul 30, 2009
We're creating video that is destined for multiple countries - we've created a framework that has a video page (using the FLV playback component, w an external FLV w/ progressive download) for the given languages we're using, and subtitles for each, etc.. Until now, we've been using the same English video & audio for each, but the client is looking into having the videos dubbed into different languages.
We're hoping to avoid re-encoding the video for each language in order to accommodate for the different audio tracks. Also, having different video files for each language would mean using more storage (since we're talking about a lot of video files, so it adds up). Is there a way to use FLV playback to progressive download an FLV file (video only) while playing a separate mp3 file? Most inquiries into playing separate audio and video has led me to embedding video, which isn't feasible in our case.
View 4 Replies
Similar Posts:
Mar 14, 2012
Is it possible to access a video's audio tracks when playing an flv, mp4, m4v, etc? I am trying to build a player where I can switch between different language tracks but can't find how to access this property.I am using the FLVPlayback component:
ActionScript Code:
mPlayer = new FLVPlayback();
mPlayer.width = 957;
[code]....
View 0 Replies
Mar 7, 2010
I am importing a video (mp4 format) into Flash and selecting "Load external video with playback component". I am using one of the playback components that goes under the movieWhen I play the movie, everything looks like one, but when I export, the movie is one swf and the component is another swf file.
View 5 Replies
Jun 27, 2010
I want to add a simple audio control (play/pause/seek/volume) control to my flex application.
View 1 Replies
Dec 11, 2009
[URL]. Site works fine after a lot of experimentation but there's 1 problem. If you start the video and go to another tab the audio continues go back again and it starts again, this can happen multiple times. I am using a flv playback component.
View 0 Replies
Apr 26, 2010
I am wanting to play a number of movie clips and flash produced video clips. On the main timeline I have a frame for each clip I want to play. In that frame is a flash movie that contains the video that I have embedded onto the timeline for the movie. The filesize for this project is massive and I am struggling to work on the file. I want to be able to play the video files with the playback component in each of the frames where the video was.
[Code]...
View 5 Replies
Nov 9, 2010
I have trouble in choosing between external video with playback component and embedded video . I have tried adding video to dynamic page and everything is perfect .This video I have imported using the option File ->import video -> external video with playback component. If I try to execute flv on another system , the video is not playing eventhough it is in library.
So, I have imported video using the option of embedded video and this worked fine on another systems as it embeds video. The video plays for only 2 min 54 sec. I have compressed the bit rate to how much ever I can in premier pro. It resulted in reducing the size of the file but still I see the video occupying more than 3500 frames in the timeline. I feel this is not optimal.
View 1 Replies
Feb 18, 2010
I have loaded an external video with playback component in Flash CS4.
Now the question is do I need to add streaming script or not?
View 2 Replies
Apr 14, 2011
Is it possible to dedicate separate bandwidth for both audio and video during for example video chat?
Basically my end goal is to give a minimum bandwidth to audio (so it has a minimum quality, at least), then the video will use the rest
View 1 Replies
May 20, 2009
I have a frame where I have added an flv playback component to play a flv file. Everything plays fine, but when I test the file and navagate away from the frame that the playback component is on, the video continues playing.
Is there any way to get the video to stop when the user navigates away from the frame? I'm sure this could be done if I add the video using AS 3.0 (that is what the navigation of the site is coded with).
View 2 Replies
Nov 16, 2009
I am using the following code to load my video into the playback component, but the video is the wrong size, it's too small and isn't centered in the video player.
Code:
import fl.video.*;
var myVideo:FLVPlayback;
myVideo = new FLVPlayback();
myVideo.source = "videos/Logo Animation WEB.mp4";
myVideo.addEventListener(VideoEvent.COMPLETE, completePlay);
[Code] .....
View 1 Replies
Sep 22, 2010
A quick question. Is it possible to play a mp4 video file with 2 audio tracks in it and switch between the two audio tracks? In stead of subtitles we want to provide the user with audio in their own language. As a test I received a mp4 video file with 2 audio tracks, an English and a German. When I load and play the mp4 video file I default hear the English audio track. Is it possible to switch to the German audio track?
View 5 Replies
Mar 9, 2010
I've been given a video url that I want to pull into an the flvplayback component. The url for the video I've been given is:The problem is when I set the contentPath with the above url the component won't load the video with the extra parameters ?var_log=102|441100001-1|- added as it says the path must end with .flvI am asumming that the video provider needs this extra var/parameter to be called in order to track the number of video requests, in which case I will need to keep this in.
View 2 Replies
May 23, 2011
There seems to be tutorials on starting the next video at completion of the previous one using the FLV2.5 Playback component, but stopping a video playback event when a new one is triggered. Ex. Video one button is clicked and video starts playing, viewer clicks video two button mid way through playback of video one and starts video two. How do I stop the playback of video one when video two button is clicked to avoid both playing simultaneously?
I have used:
if (snd ! = null) {
channel.stop();
}
for audio files sucessfully.
View 1 Replies
Aug 27, 2010
I'm attempting to use Flash for displaying "scrolls" on our educational access channel. I have an announcement on each frame, which has a 7 sec delay, and a footer that displays the current time. What I would like to do, using the vars the Hours and the Minutes trigger a command that at a set time, like 8:20, it would jump to another swf file that might contain a video playback component. I can't seem to come up with the right combination to trigger it a set time. Here is what the frame 1 AS contains.
ActionScript Code:
stop();
var wT:uint = 1000; //wT = waitingTime
var ttL:uint = 1; //ttL = times to loop
function customTimer (timeToWait:int = 1):void {
[Code] .....
View 3 Replies
Oct 12, 2009
everyone out there that is smarter than me. I have made this little prototype video player, and it isn't working. It'll eventually become a nice little player show videos from our summer camp for the last few years, but first I want to make it work in a basic stripped down version. There is a playback component with one of the skins right above the three buttons.
Here's the ActionScript: btn1.addEventListener(MouseEvent.CLICK, vid1);btn2.addEventListener(MouseEvent.CLICK, vid2);btn3.addEventListener(MouseEvent.CLICK, vid3);
function vid1(e:Event):void{vidPlayer.source = "Video1.flv"};function vid2(e:Event):void{vidPlayer.source = "Video2.flv"}; function vid3(e:Event):void{vidPlayer.source = "Video3.flv"};
It runs fine when I test in in flash and even the .swf file runs fine alone, but when I put it in a .html file via Dreamweaver and in the published .html it doesn't run. What up?
View 1 Replies
Jul 27, 2009
I have a video component play on frame 1. When my movie goes to frame 2, the audio continues to play even though the video component is no longer on the stage.
View 14 Replies
Aug 13, 2009
I have a Flash file that has two music tracks. The player I built works well so far except for this, I am trying to make a Pause/Play button the works on either track. Right now it only works on one. With my limited knowledge of AS3 I tried different solutions but none worked.
Here is the SWF file; [URL]
You will see that the Pause/Play button only works on �Kiss My Dogg� which is track 1.
Here is the FLA file; [URL]
Below is some of the Script I wrote. The pause/play is the part I can�t figure out.
//function to load different tracks
function loadMusic(evt:MouseEvent):void{
//stop whatever is playing
SoundMixer.stopAll();
[Code].....
View 2 Replies
Jan 12, 2010
when a video is playing..and i click a button to play to a different label in the main time line..the video component disappears but the audio keeps playing.. all so the volume component, the slider indicator stays stuck to the stage.. what AS3 is needed..to stop the audio and fix the indicator..
View 5 Replies
Jun 9, 2010
What is the script to control the volume of multiple audio tracks embedded within a movie clip?
View 1 Replies
May 20, 2010
I am putting together a basic video portfolio and have everything working except when I click the back button to get back to the thumbnail page (contained on frame 1) the audio from the video continues to play, I'm not an expert on as3.
I have tried a lot of code in the function below ( like "stopAll();" ) but nothing seems to work.
View 1 Replies
May 16, 2010
I am putting together a basic video portfolio and have everything working except when I click the back button to get back to the thumbnail page (contained on frame 1) the audio from the video continues to play.[code]
View 4 Replies
Mar 10, 2009
hope i'm explaining this the right way. i'm using the flash flvplayback component to play a video. i've stripped the audio from the flv and am playing it, along with another audio clip, on the timeline at the same time. volume has been set for both clips, but i need to allow people to adjust the volume from the volumeBar that exists inside the video player. it's built in as2.
View 1 Replies
Jul 3, 2010
I'm interested in learning how to decode and playback audio in ActionScript 3. I understand how to write bytes to a Sound object using the SAMPLE_DATA event, so that's not really a problem. What I want to understand is how I could implement alternate audio formats for native playback inside of Flash Player. I guess what I'm asking is: how do I take something in X format and "convert/decode" it to WAV format and write the bytes to a Sound object, playing back the audio? I'm interested in writing a decoder for FLAC audio and possibly OGG audio, as these seem to be some of the most widely used open source audio formats
View 2 Replies
Apr 13, 2009
I like to make a fullscreen desktop application, with an FLV, using the FLV Playback component. However, I�d like there to be a Fullscreen button on the playback component, which will allow the user to toggle the video fullscreen.I cant, for the life of me, figure out how to do this with various settings�it should be easy! This is what I have--is there a better way to do things (without a custom movie player)? My inital settings are as follows:
Code:
stage.displayState = StageDisplayState.FULL_SCREEN;
theMovie.fullScreenTakeOver = false;
Then I have a function which should work--but my button won't appear in fullscreen--Can I apply this function to the built-in fullscreen button?:
Code:
function handleClick(event:MouseEvent):void
{
if ( !theMovie.fullScreenTakeOver )[code]....
View 9 Replies
Aug 6, 2010
If I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 Replies
Jan 16, 2009
I've been developing in flash for a while now and now I have a job developing flash and actionscript 3.0. I have come across a project with a simple concept but I have found it difficult to implement.
What I want to do is allow the user to click a button and record their voice and then I want them to click another button and play it back. I don't need to save or store it and I don't have access to a flash media server or any alternative.
View 2 Replies
Aug 25, 2009
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
View 8 Replies
Oct 27, 2009
I have two audio streams on the same client.i need to record both streams in a single flv file.can this be done?the below stub is for visual purposes.
stream0 = new NetStream();
stream0.publish("pub0");
stream0.attachAudio(mic0);
[code]....
View 1 Replies
Oct 15, 2007
I'm looking for a way to add seeking capability to audio playback. I can do it pretty easily for video, but I'm currently using a sound object which has no seek capabilities whatsoever.
Is there a different object or method I can use to direct audio playback to a particular point in the audio duration?[code]...
View 2 Replies