I am putting together a basic video portfolio and have everything working except when I click the back button to get back to the thumbnail page (contained on frame 1) the audio from the video continues to play.[code]
View 4 RepliesI am putting together a basic video portfolio and have everything working except when I click the back button to get back to the thumbnail page (contained on frame 1) the audio from the video continues to play, I'm not an expert on as3.
I have tried a lot of code in the function below ( like "stopAll();" ) but nothing seems to work.
I have 3 buttons (and 3 .swf videos).Each button makes the main timeline go to a specific frame and stop.Each Frame tells the UILoader to load a different assigned .swf video (source parameter).
Problem: when playing the project's .swf in the Flash Player, "VISUALLY" the videos properly switch,but the Audio continues, so the Audio for all 3 videos are playing simultaneously.How do I get the current video's Audio to stop when the new video is loaded ?I experimented with enabled = false;"(and other methods) between the changing videos .
switch(eventMLR.target.name) ...
case "myVideo1MLR_btn":
for (k= 0; k < sndArrayMLR.length; k++){[code]..........
I have a frame where I have added an flv playback component to play a flv file. Everything plays fine, but when I test the file and navagate away from the frame that the playback component is on, the video continues playing.
Is there any way to get the video to stop when the user navigates away from the frame? I'm sure this could be done if I add the video using AS 3.0 (that is what the navigation of the site is coded with).
We are running FMS 4.0 to stream on-demand MBR videos using the OSMF player. We have noticed that occasionally during playback the video freezes, while the audio skips back a few seconds and starts playing. Once the audio catches up, the video unfreezes and resumes normal playback.
View 2 RepliesI have this sample code from the e-book: "Learning Flash Media Server 3". The purpose of the code is to create a FLV. The code is not running as it should. When I click on the 'record' button, the label is to change to 'recording', that dosen't seem to happen and also when I click on the 'Stop Record' button, I get the following error:
"TypeError: Error #1009: Cannot access a property or method of a null object reference.at MinRecord/stopRecord()"
[Code]....
My deduction is that the 'if' statement in the 'startRecord' function is not resolving to 'true' and hence the label is not changing to 'Recording'. Also I feel that the assingment to the variable 'ns' of type NetStream is not being done and hence in the function 'stopRecord' I get the above mentioned error message when I click on the stop button. How do I rectify these problems?
I have a video component play on frame 1. When my movie goes to frame 2, the audio continues to play even though the video component is no longer on the stage.
View 14 RepliesWe're creating video that is destined for multiple countries - we've created a framework that has a video page (using the FLV playback component, w an external FLV w/ progressive download) for the given languages we're using, and subtitles for each, etc.. Until now, we've been using the same English video & audio for each, but the client is looking into having the videos dubbed into different languages.
We're hoping to avoid re-encoding the video for each language in order to accommodate for the different audio tracks. Also, having different video files for each language would mean using more storage (since we're talking about a lot of video files, so it adds up). Is there a way to use FLV playback to progressive download an FLV file (video only) while playing a separate mp3 file? Most inquiries into playing separate audio and video has led me to embedding video, which isn't feasible in our case.
when a video is playing..and i click a button to play to a different label in the main time line..the video component disappears but the audio keeps playing.. all so the volume component, the slider indicator stays stuck to the stage.. what AS3 is needed..to stop the audio and fix the indicator..
View 5 RepliesI am using Video (actionscript-controlled) component in my videoRecorder swf. What it does is it connects to webcam, record the video. This works fine. The problem comes when playing the flv back.After user stops the recording, I am using the same video component to play back the flv. But, it doesn't work. Checked the url, and its fine.When I use the same flv url in any flv player, the video gets played back. Am I missing something? Or Video (actionscript-controlled) can't handle playback videos?[code]
View 0 Replieshope i'm explaining this the right way. i'm using the flash flvplayback component to play a video. i've stripped the audio from the flv and am playing it, along with another audio clip, on the timeline at the same time. volume has been set for both clips, but i need to allow people to adjust the volume from the volumeBar that exists inside the video player. it's built in as2.
View 1 RepliesIf I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 Repliesi have a problem with a back button when i click BACK the video of the FLV video component continue and also when i'm back in the home page i can hear the sound...how can i stop it here is the code of my back button
stop();
back_btn.addEventListener(MouseEvent.CLICK,backvid eo);
function backvideo(event:MouseEvent):void {
gotoAndPlay("1");
}
the video instance name is my_video I try to put my_video stop(); but nothing
I'm trying to create a simple "universal" media player which presents the same user interface (or as similar as possible) for video and audio playback. Unfortunately, FLVPlayback seems not to be able to handle audio files as far as I can tell, so I'm using a Sound and SoundChannel.
My video playback is handled using an FLVPlayback component which is "wired" to standard controls on-the-fly when needed. What I want to do is wire them to the Sound / SoundChannel when I'm playing a sound so that the same UI widgets work in both cases. I'd like to avoid building all my components from scratch because the FLVPlayback component does a lot of nice stuff "for free" but it's starting to look tricky.
The standard PlayPauseButton is a MovieClip with two layers, one containing the Play button (and with the instance name play_mc) and the containing the Pause button (pause_mc). Inside one of these is a movie with some code like this:
stop();
this.upLinkageID = "PauseButtonNormal";
this.overLinkageID = "PauseButtonOver";
this.downLinkageID = "PauseButtonDown";
[Code]....
when the video reaches 1 minute, a button appears. is there a way to hide the button again if the user uses the seek bar to go back to the 30 second (or any time before 1 minute) point?
View 2 RepliesIm currently making a website but ive run into a problem. i imported a flv onto the stage, all was fine. i tested it and when i navigate onto the page it starts automatically. when i navigate away from the page the audio keeps playing. is there anyway i can stop it playing automatically and have it halt after i navigate away from the page.
View 1 RepliesI have a game that has sounds for specific user actions. The second that the first sound is activated, sounds in all other flash movies stops. For example, mp3 streaming swf's or video streaming swf's from youtube, will halt, the very second the user clicks in my game. What's going on and how can I patch this?
View 2 RepliesI was wondering how do I stop my audio when I enter a new scene?
View 3 RepliesI have scene that loops over and over if the user clicks on the wrong button. The audio is loaded at about half way through the scene.when the scene loops around again, and the user clicks the right button I want the audio to stop. BUT it doesn't and I'm using the same code as I've used before (it works normally)Is it becuase the second time round, at the time the user clicks the button the audio hasn't actually loaded and started playing. All you're listening to is what's left playing from the first loop?
View 3 RepliesI managed to use a loader to load an swf that has a video/audio track encapsulated within it. It starts and plays fine. Because of property rights considerations, I must use the provided swf with the video within it rather than converting it to an FLV.
And using the unload command I get the video portion to stop, but not the audio.
I know that I need some kind of audio stop to stop the audio, but haven't been able to figure out exactly how.
The parent swf is pretty simple, no buttons, it just plays 6 external swfs under control of another program that starts it and stops it with no other interaction.
I have 4 sets of 2 buttons (on and off):
Each set of buttons I want to trigger and stop a different audio file. (4 audio files in total)
I would like for the sound files to be saved within the .fla file.
I have done lots of searching but I still haven't been able to get this to work.
How I will be back in Login Page after click of logout which is in application's component.
Project.mxml
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" width="100%" height="100%"
[Code]....
how to stop the animated film performed to the back on appropriate cages.Normal melt (); is feeling at such an animated film of none.It is a code:
ActionScript Code:
btn_back.addEventListener(MouseEvent.CLICK, prevClik);
function prevClik(event:MouseEvent):void {
addEventListener(Event.ENTER_FRAME,goPrev);}
[code]....
Sometimes I get ahead of myself and have to stop and say how the hell did I do this before?'m referring to a simple stop button I need to put in a flash animation. I know how to code calling a sound from the library, starting and stopping. But how do I stop audio that is streaming inside a layer from a button ?
d(new URLRequest("yoursoundfile.mp3"));var my_channel:SoundChannel = new SoundChannel();//2.play_btn.addEventListener(MouseEvent.CLICK, playSound);stop_btn.addEventListener(MouseEvent.CLICK, stopSound);//3.function
[code].....
I don't use Flash that much so the question may sound simple, but how do I pause audio in a timeline? I have added the audio, play and stop button. When I test it works fine, but I can't figure out how to add the pause button, or the play/pause button.
View 2 RepliesThis is really confusing (the title of this thread probably doesn't make any sense at this point), and I'm not actually quite sure what I'm trying to do is possible, but I figured I'd throw it out there.
Basically, I have created a speaker-looking button (speakerON_btn) that plays the audio in Flash. It works fine -- starts automatically and stops when it's at the end or when somebody clicks on it.
Then, I put this Flash file into an HTML... works good. However, on this HTML page, I also have a PDF link (that links to what the audio is discussing). I have been asked to stop the audio when the user clicks on the PDF to open it. I don't want the PDF to open in the same window, so I can't use that as a method to stop the audio.
Is there any ActionScript I can add to the Audio Flash file that will tell it to stop when a user clicks on a link outside of Flash?
Also, if the above is impossible, would it be possible to add ActionScript to stop the audio if I were to build the entire HTML page as a Flash file? If that's a possibility, what ActionScript would need to be added to the my speakerON_btn?
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
I have a problem with an animation because I want to stop the loop sound without stop the entire animation what can I do to make correctly this action please? I tried to make a movieclip to control individually of the center time line but i dont get good results.
View 4 Repliesbasically this code will work like a browser back button its very simple but "could end up very long" basically it will act "similiar to the browser back button"
Code:
on (release) {
if(page1 = _currentframe){
_root.gotoAndStop("quiz");
} else if (page0 = _currentframe){
[code]....
it works when the (page1 = _currentframe){ is rotated with the first if statement...because for somereason it seems to not recognise the "else if's"
I have a listener for the arrow key strokes. When I select my clip the arrows work fine. However, there is also a slider on the stage. If I touch the slider the left and right keys now adjust the slider, this is not desired. How to I prevent the slider from using the keyboard input?
View 2 Replies