Im currently making a website but ive run into a problem. i imported a flv onto the stage, all was fine. i tested it and when i navigate onto the page it starts automatically. when i navigate away from the page the audio keeps playing. is there anyway i can stop it playing automatically and have it halt after i navigate away from the page.
View 1 Replies
I have a game that has sounds for specific user actions. The second that the first sound is activated, sounds in all other flash movies stops. For example, mp3 streaming swf's or video streaming swf's from youtube, will halt, the very second the user clicks in my game. What's going on and how can I patch this?
View 2 RepliesI was wondering how do I stop my audio when I enter a new scene?
View 3 RepliesI have scene that loops over and over if the user clicks on the wrong button. The audio is loaded at about half way through the scene.when the scene loops around again, and the user clicks the right button I want the audio to stop. BUT it doesn't and I'm using the same code as I've used before (it works normally)Is it becuase the second time round, at the time the user clicks the button the audio hasn't actually loaded and started playing. All you're listening to is what's left playing from the first loop?
View 3 RepliesI managed to use a loader to load an swf that has a video/audio track encapsulated within it. It starts and plays fine. Because of property rights considerations, I must use the provided swf with the video within it rather than converting it to an FLV.
And using the unload command I get the video portion to stop, but not the audio.
I know that I need some kind of audio stop to stop the audio, but haven't been able to figure out exactly how.
The parent swf is pretty simple, no buttons, it just plays 6 external swfs under control of another program that starts it and stops it with no other interaction.
I have 4 sets of 2 buttons (on and off):
Each set of buttons I want to trigger and stop a different audio file. (4 audio files in total)
I would like for the sound files to be saved within the .fla file.
I have done lots of searching but I still haven't been able to get this to work.
Sometimes I get ahead of myself and have to stop and say how the hell did I do this before?'m referring to a simple stop button I need to put in a flash animation. I know how to code calling a sound from the library, starting and stopping. But how do I stop audio that is streaming inside a layer from a button ?
d(new URLRequest("yoursoundfile.mp3"));var my_channel:SoundChannel = new SoundChannel();//2.play_btn.addEventListener(MouseEvent.CLICK, playSound);stop_btn.addEventListener(MouseEvent.CLICK, stopSound);//3.function
[code].....
I have 3 buttons (and 3 .swf videos).Each button makes the main timeline go to a specific frame and stop.Each Frame tells the UILoader to load a different assigned .swf video (source parameter).
Problem: when playing the project's .swf in the Flash Player, "VISUALLY" the videos properly switch,but the Audio continues, so the Audio for all 3 videos are playing simultaneously.How do I get the current video's Audio to stop when the new video is loaded ?I experimented with enabled = false;"(and other methods) between the changing videos .
switch(eventMLR.target.name) ...
case "myVideo1MLR_btn":
for (k= 0; k < sndArrayMLR.length; k++){[code]..........
I don't use Flash that much so the question may sound simple, but how do I pause audio in a timeline? I have added the audio, play and stop button. When I test it works fine, but I can't figure out how to add the pause button, or the play/pause button.
View 2 RepliesThis is really confusing (the title of this thread probably doesn't make any sense at this point), and I'm not actually quite sure what I'm trying to do is possible, but I figured I'd throw it out there.
Basically, I have created a speaker-looking button (speakerON_btn) that plays the audio in Flash. It works fine -- starts automatically and stops when it's at the end or when somebody clicks on it.
Then, I put this Flash file into an HTML... works good. However, on this HTML page, I also have a PDF link (that links to what the audio is discussing). I have been asked to stop the audio when the user clicks on the PDF to open it. I don't want the PDF to open in the same window, so I can't use that as a method to stop the audio.
Is there any ActionScript I can add to the Audio Flash file that will tell it to stop when a user clicks on a link outside of Flash?
Also, if the above is impossible, would it be possible to add ActionScript to stop the audio if I were to build the entire HTML page as a Flash file? If that's a possibility, what ActionScript would need to be added to the my speakerON_btn?
I have a problem with an animation because I want to stop the loop sound without stop the entire animation what can I do to make correctly this action please? I tried to make a movieclip to control individually of the center time line but i dont get good results.
View 4 RepliesI am putting together a basic video portfolio and have everything working except when I click the back button to get back to the thumbnail page (contained on frame 1) the audio from the video continues to play.[code]
View 4 RepliesIf I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 RepliesI want it to while still easing into place like the iphone does. For example my stage is 550px. The drag and throw MC is 1650. That's 550x3. If the first image is showing starting at x axis 0 and you drag to the left it will ease into place stopping and showing the second image stopping the image at x axis 0. And the same thing scrolling to the next one and scrolling back. So the code is below and I've attached the movie that I'm working on.
[Code]....
flash pro. as 3.0.animation . almost no codes except ends of scenes having :
import flash.media.SoundMixer;
if(SoundMixer.areSoundsInaccessible() == false)
{
SoundMixer.stopAll();
}
[Code]...
i got this scene, with this specific bgm , individual frame layer. and the sounds at another layer. what i want is to stop the sound without stopping the bgm . (yes, i know the above code wouldn't work as it stops all sounds)
I am making a character walk. This code will make him wobble to the right and when thats done it will trigger him to wobble to the left and then call the function again to continue the loop.I can get the loop to work fine by calling the function but how do I STOP the function? Also I want to call it later on. Is there a way to start and stop a function?
function wobble()
{
var ws = .1;
var dis = 1;
[code]....
I ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
Anyone know of a skinnable audio player (or something similar to Windows Vista audio control in task bar) that i can embed in my website?
A player that can be customized to use a 'speaker' icon instead of a 'play' icon. When the speaker is clicked, the volume can be adjusted or turned off. The option of being able to autoplay and set the default volume level.
I am converting from .FLV's to .F4V. Video outputs fine but the audio sound stops after a few seconds from the beginning.I have tried many different settings for the audio with no luck. Also, tried on a colleague's machine who is running CS3, which works fine, so something is buggy in CS4...
View 1 RepliesBecause the player optimizes framerate, antialiasing etc dependent on the performance capabilities of the platform upon which it is running, it was nearly impossible to ensure animation syncronization w/ audio. If the audio were on the timeline you could set sync params to stream, but if the audio is loaded programically forget it .. well until AS3 ..The following code throttles the player framerate to lock step the animation to the audio .. not perfect but the principal works ..
View 1 RepliesLet me first establish what I want to do:My user is able to record voicenotes on my website, add tags to said notes for indexing as well as a title. When the note is saved I save the path of the note along with the other info in my DB.Now, I have 2 choices to do the recording, both involve a .swf embedded in my site:
1) I could use Red5 server to stream the audio to my server and save the file and return the path to said file to my app to do the DB saving, seems rather complicated since I would have to convert the audio and move it to the appropriate folder that belongs to the user in a server side Red5 app, which I'm not very aware of how to build.
2) I could simply record the audio and grab its byte array, do a Base64 encoding on it and send it to PHP along with the rest of the data that is necessary (be it by a simple POST or an AJAX call), decode it on the server and make the file with the appropriate extension, audio conversion would also occur here using ffmpeg, this option seems simpler but I do not know how viable it is.
Is there a way to stream and audio line level feed rather than the audio from a computer's microphone?
View 1 RepliesI have an audio player that has a custom timeline and playhead. I am using a start and stop drag to move in the time line but the only way i can make it work is to have it play when ever I release the play head. I would like it to stay stopped if the player is paused and play if the player was playing.
[Code]...
The images for animation load okay. The sound loads okay. But the animation images need to be inserted in coordination with the sounds, which is difficult using only the ears There is a visual graph of audio levels in the library window, which I have seen appear in the timeline also but only momentarily. I do not know how to keep the audio graph on the timeline so as to know where to put the images. I can keep the graph open on the little library window when it is open but not on the timeline. how to keep the graph open on the audio track while I work on the image tracks.
View 1 RepliesMy server is streaming binary audio data (mostly mp3 files) to a client (a browser). This client stores the audio data in memory.
What I'm looking for is a flash audio player that I can input the binary audio data so that it can play the audio file.
Preferably, the flash client is merely a bridge to Javascript so that I can handle everything in Javascript and simply use Flash's audio features, but this is not a requirement.
I have a single audio file, I'd like to avoid cutting it up.
I know I can use the sound class, mySound.play(150), to start at 150ms but haven't come across a way to stop the audio say after 500ms or at 650ms.
I'm looking for a (free) flash player that I can embed in my site and use to play a .m4a (.mp4 with AAC audio) file that will be obtained using a URL (i.e. it's not local to the server hosting the web page).I've tried searching on google for one, but either I'm searching wrong or no one has made such a thing. Ideally this would be very simple (small user interface with play button and maybe a progress bar) and it would be easy to have multiple instances of on an html page (can create the player with an <object> tag).
View 7 RepliesI am new in action script 3.0. i am trying to build an audio player which will stream audio(mp3 etc.) from wowza media server. the player needs to have a play button, stop/pause button, a play progressbar and a volume scroll bar. i am using NetStream object to paly the audio
View 1 RepliesI am creating an audio communication application. In that two users are able to communicate. But the problem is that some time in audio I am facing an echo problem.
View 2 RepliesI was wondering if anyone could help me get some information on audio limitations in flash. Is it possible to have audio "scrubbing" that allows you to hear the audio as you scrub? Currently the only way I know to do this is by having it on the timeline, and set to stream. Using this method seems to be causing more issues than it solves. Preferably I would just like to load the audio in dynamically and then scrub through it. Is it possible to use that method and then still retain the ability to hear it as you scrub through it?I am having with the audio on the timeline. The main issue with this is that I have to manually add frames to the timeline, in addition to that I can not dynamically load the audio through xml. Well not that I know of.I think the best route is probably loading in the audio dynamically.
View 0 Replies
