Actionscript 3 :: ILOG Elixir - Adding Dynamic Series To The Elixir Radar Chart?
May 16, 2011I'm having a real hard time adding RadarColumnSeries to my Radar Chart using ActionScript.
[code]...
I'm having a real hard time adding RadarColumnSeries to my Radar Chart using ActionScript.
[code]...
URL...Everything in the clock is working expect for the hour hand. The hour hand stays on 12 all the time.I have used the entire code as it is.. changed nothing in it. The clock is working fine on the example page.
View 1 RepliesI'm looking for Flex vector maps components. amMap and IBM ILOG Elixir?
View 1 RepliesI've looked through all IBM doc and Adobe livedocs, My labels for my columns which are loading dynamically are not centered properly under the columns. Here is the component code. The labels are off center to the left, and some overlap the one left of where it should be. I tried adding styles to several different areas but couldn't get it:
<ilog:ColumnChart3D id="columnChart" dataProvider="{chartData}" showDataTips="true" elevationAngle="5" projectionType="oblique" width="90%" height="100%"
rotationAngle="2" lightLatitude="0" lightLongitude="0"[code]...........
i'm building my first RIA in flex, and did a little of research to find a radar chart component free, but all i found is not free (licence >500$).Where can i find it for free ?
View 2 RepliesI have a Line Series Chart in Flex with values from 0 to 90. I would like to set the background of the chart in such a way that, 0 - 30 is in green, 31 - 60 is in red and 61 - 90 is in blue.
View 2 RepliesI want to know when the data has been added to a chart so I can use localToData() to draw on the chart. If I do this immediately after setting the dataProvider the chart has not yet updated, so the the call to localToData will not return the correct values. Is there an event I can subscribe to so I know the chart has drawn the data in the dataProvider?
View 2 RepliesI have a line chart with a column chart as a secondary series. When I roll over the line, the datatips appear. However, if I move the mouse to a spot where a column appears while still on the line, the data tip item appears for the line AND the column. How do I get it so that I only show datatips for the line but not the column?
[Code]...
I want to show the second line series underneath the first one, however with this code they are appearing sequentially. Not sure how to make sure they are overlayed! I followed some code I saw for combining charts.. not sure what to do.
<mx:LineChart showDataTips="true" x="10" y="77" id="GlucoseChart" width="1009" height="219">
<mx:horizontalAxis>
<mx:DateTimeAxis dataUnits="hours" parseFunction="parseDateString" displayLocalTime="true" />
</mx:horizontalAxis>
<mx:series>
[Code] .....
I have the follow class :
package my.controls.charts.series
{
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Code]....
The new series name appear on the chart, but the data doest, and the chart always remains blank.
I want a chart that has several separate series running in rows across. They are largely separate charts and should not overlap, but all share the same horizontal datetimeaxis. They don't share the same y-axis, however and that's where I'm getting stuck.I have tried having a linechart series and then a plotchart series, but it will only allow a single <mx:series> per chart without having them inside the same series which as far as I can tell will place the charts on top of each other in the z-axis. I can stack them and have them completely separate charts, but it was proving to be somewhat irritating having them align correctly.
Is there any reasonable way of combining multiple charts into one like this? Basically having rows in a table where each row is a different chart but the columns are consistent. or am I going to be best served just by stacking separate ones? an illustration of what i'm going for is here: http:[url]........
There is a serious issue I am facing with flash builder charts.
When I load the chart the first time I get this -
But if I refresh the page immediately in the same browser, I get this -
The second one is the expected one. This issue just repeats if I close the browser window and open it in a new browser window. For explaining properly, I am attaching the source code here -
[Code]...
I have an air app that collects live data from a user's action and graphs it.It records data every second and charts it on three different line series from the same array collection.This works out great at first, but it gets worse and worse as time goes by. When it gets close to an hour it's almost unusable.I'd like to be able to add a point to the graph and have flex JUST draw the new point and not invalidate the whole series and redraw it. Is this possible? I'm willing to override something to make this work.My last ditch effort is to take the average of 5 or 10 points and only adding those. This will still work poorly when the user is going for 3 hours or so, but I can't think of a better way.
View 2 RepliesIs it possible to develop chart in flash (eg. bar chart, pie chart)?
View 1 RepliesI'm not quite sure how to do this - I'm building an admin interface to sort the order of a series of flash slides into a dynamic presentation. The admin interface pulls the slides from xml and displays each as a thumbnail. The thumbnails, when dragged, reorder themselves in the array appropriately. The problem is, I want the actual array of slides to reorganize itself accordingly. My code is this:
function onThumbPress( e:MouseEvent ):void {
e.target.startDrag();
} function onThumbRelease( e:MouseEvent ):void {
e.currentTarget.stopDrag();
sortSlides();
[Code] .....
So what I want to do is take the change in the array (say 0 moves in front of 1 in project_thumbs_array) - and make sure that my other array (project_clips_array) moves item 0 in front of 1 as well. I thought something like this might work but it doesn't:
project_clips_array.sortOn ('project_thumbs_array.x',Array.NUMERIC);
I'm trying to create a radar effect (a looping circle which gets larger). Now, the way i do this with other programming languages is to draw a rectangle as the background with a low alpha amount. Then draw the circle growing on top of the background, then draw the background again in the loop.I've got it working like this in flash but it gets really slow after a very short time since I am adding children each time the loops goes through.
Code:
var radarSize:Number = 1;
stage.addEventListener(Event.ENTER_FRAME, loop);
//-----------------------------------------------
[code]....
Is it possible to create a bar chart with dynamic data in AS2 or AS3??? If so, can anyone point in the direction of a good tutorial?
View 3 RepliesDoes anyone know of any opensource tool for creating dynamic organization chart in flex by reading values from database
View 4 RepliesDoes anyone know of a good charting/graphing tool that supports dynamic pie charts, i.e.where a user could change the values by dragging, etc? It would need an event API so I could get access to the changed values.
View 2 RepliesI am having a problem creating a slice of a pie chart.
- The slices are accurate up to 90 deg,.
- I can't get both sides of the triangle to draw from the centre to the circumference.
//Input value = 10% of 100
var value1:Number = 10;
//Convert to decimal
var persent:Number = value1/100;
var deg:Number = persent*360;
[Code] .....
I have a very interesting challenge here for my Flex project development. I now have an experiment wizard which consists of three states.In the first state,the user selects the elements they are interested from the periodic table. When it comes to the second stage,now we have the elements that the user selected in the first state,and these elements are shown on a list A',the user can select an element from there. Also,I have an xml file that has the intensities and wavelengths for all the elements in the periodic table
[Code]...
I've found some code on the net that creates a dynamic pie chart using xml.It works fine, but what I want is for it to make each slice a movie clip so that I can target the slice to show a the percentage on mouse over.At the moment all the slices is in one mc called piechart.
Code below
ActionScript Code:
var titles:Array = new Array();
var values:Array = new Array();var xmlLoader:URLLoader = new URLLoader();
var xmlData:XML = new XML();
[code]....
Is possible to create dynamic bar chart for flash mp3 player?I mean the similar effect like in Winamp or others music players (WMP) to display bar chart depending on the sound intensity.
View 6 RepliesI'm trying to prevent a default chart item roll over highlight in a Spark column chart.If you look at any of the chart examples on this page , when you roll over any of the chart series items, they turn a darkened shade of their original colour. This is what I want to prevent.
So far I have had no luck with using the itemRollOverColor property, as this only allows you to set it to one specific colour for the whole chart (my app has several different coloured series on the chart at once). Also, trying to leverage the itemRollOver event (with preventDefault() etc) hasn't worked either.
How can I Create an animated Bar Chart or Line Chart type of component in flash programmatically, which should depends upon an incoming XML data, the chart should have the basic criteria like, Chart Label, Item Tooltips, background grids (without using any image). There also needs an ability to change the data which should reflect the chart as well.
View 1 RepliesI'm trying to make chart which is combination of bar and line chart using Flex Charting API . Here x axis would be common and y axis would be different. note that y axis got different range of value one is % and other is amount. Any one got idea how to make this chart. Here line chart would be staked on top of bar chart . The line chart and never over laid or drawn on top of bar chart.
View 1 Repliesas from title above, minimap where enemies spawn and can be shown on the minimap and enemies warp like player_mc do. ps: i'm new to this forum. attached files below
View 0 RepliesI using Flash CS5 for the first time, and I'm hitting a snag. I have an input box on Scene 1 for age (variable called old). On scene 3, I have a dynamic test box (variable called display), where I want to display the age (old) + 10.
My Code looks like this:
PHP Code:
var Real_age = Number(old) + 10;
display = Real_age;
It's returning NaN.
A trace of the output of Real_age gives:
PHP Code:
<TEXTFORMAT LEADING="2"><P ALIGN="LEFT">
<FONT FACE="Times New Roman" SIZE="12" COLOR="#009900" LETTERSPACING="0" KERNING="0">2</FONT></P></TEXTFORMAT>
<p align="left"></p>
<p align="left"></p>
NaN
<p align="left"></p>
<p align="left"></p>
The code works OK in Flash 8, but I figure I must have some some setting that is spitting out the unwanted HTML.
In my as3 project I have to add buttons dynamically. In the for loop .. for every iteration I want to add a button in the movie clip with a mouse click event.I have tried to do this But the button is not displayed in the movie clip.Here is the code inside for loop for dynamic button.
Code:
// Create the button
var uploadButton:SimpleButton = new SimpleButton();
uploadButton.name = "btnUpload"+objectSequence;
[code]....
what I want to do is dynamically when the movie is running add a MC to the library only, I don't want it on stage, I just want to create it, add the content to it and that's it, I just want it sitting in the library. I saw this code on another post, but I don't know if this is it or if this relates to a component of some sort:
ActionScript Code:
itemexists = fl.getDocumentDOM().library.itemExists("Service1");
if (itemexists == false) {
[code]....
I've tried searching everywhere I can think of, and in CS3 the help has no documentation to the getDocumentDOM function or adding to the library on the fly. how do I add to this said MC in the library, the same as I would any other MC or is it different?