Basically I created a simple mp3 player, and there are multiple copies of that embedded in a page. Now when I play one, I want all the others to pause.. is it possible to do n-way localconnection? or is there a better alternative?
View 3 RepliesWhat is the trick to develop an SWF that reads user input text and then displays it after submissions? Should I have the SWF read the text from an XML that receives the data? Basically, it is a greeting card and people can send a personalized message to a recipient.
View 6 RepliesI have an invisible movie clip I want to go to the NEXT page, as it goes to that page, I want it to essentially remove itself (page1.swf). e.g. page1.swf (contains fancy.swf - [AS2], 4 images, several invisible MCs with code) has an invisible MC + on click = remove page1.swf.
To be clear, this does work. It goes to page2.swf and page2.swf goes to page1.swf as it should. The issue is that if the user repeatedly does this (just 2 or 3 times) the fancy.swf becomes impossible to control and Flash (CS5) crashes. I think this is due to the fact it's not unloading the entire thing, it's only unloading fancy.swf on click (I hope). So underneath page2.swf is page1.swf, and when the user clicks back to page1.swf, page2.swf AND page1.swf are underneath that, and so on and so forth.
[Code]...
I have 3 pages view,
HomeView
ViewPg02
ViewPg03
In HomeView, has a List control and when user select an item it will goes to ViewPg02
[Code]...
How to pass variables from one page to another page in ActionScript? I got some solution that this can be done using CustomEvents in ActionScript, but i couldn't found understandable and easy solution. explain how to pass variables with a small example?
View 3 RepliesI'm trying to display a message on my web pages home page to notify all viewers on some info, I need it to open automatically when the page is accessed then disapper or fade automatically.I'm trying to avoid making this a pop up because most people deativate thier pop ups.
View 1 Replieshow to pass data between 2 swfs better way then LocalConnection.I tried Localconnection but it seems slow and unreliable.id did test passing array 5000 items 200k bites in total
I sent row by row (on success sent next row).it took me 90 sec to pass data from one swf to another and it failed on second attempt.Is any other way to establish bridge between 2 stand alone swfs?
I have a main movie with a dynamically created menu (uses data gathered from an XML file). Each menu item has an Action and Variables associated with this action.
Code:
<?xml version="1.0"?>
<menu name="mainmenu">
<item name="Home" action="gotoURL" variables="http://www.something.com
[Code]....
Now as you can see from my XML file above one of my menu options is a photo gallery. What I would like to to is have one swf, i.e. photoGallery.swf, and load this into an empty movie clip called content_mc and pass it different XML files (same format, but different content). (see my loadSlideShow() function)
I have a page that can be seen here: [URL]
As you should be able to see, it seems as though the Flash file on the left is causing the one on the right to reload upon final loading. The one on the right will reload itself once the one on the left finishes loading.
I have tested the flash files by themselves and both load only once when loaded by themselves. It seems as though one is causing the other to re-load which is just mind boggling to me.
Can 2 swfs on the same page communicate with each other directly? Or do you have to do something tricky like setting variables in a stored object from one swf and then constantly checking for updates to it in the other swf?
View 1 RepliesIs it common to have issues when there are more than one Recording SWF on an html page?I have 4 SWFs on a page, each with the capability to record, They all use the same FMS application but record and playback different FLV files.Could there be an issue with the NC being shared and then causing grief?
View 2 RepliesI'm trying to post multiple .swf objects into one html page. The first .swf object plays fine, but the second one does not load. My page is [URL]
Dreamweaver tells me that swfobject.registerObject does not exist, or something like that, but I see this code being used elsewhere. I have swfobject.js in my main folder, too.
I am trying to make a web page that has multiple of the same SWF on it. I am having a problem with it being stupidly slow loading (download time is fine though). I have a 4x4 table in each cell there is a swf file embedded in an iframe. (Note: 4 X 4 table => 16 SWFS).
My AS3 code is very simple:
package
{
import flash.display.Sprite;
import flash.system.System;
[Code]....
Is there a good way to embed multiple identical swfs into a web page? Why are IE and Firefox struggling so poorly? I suspect it has to do with the fact that both IE and Firefox each only have one thread to run plugins (Flash) in. I have a similar app written in AS2 (not written by me, I just have the swf file). It is much more complex but it loads orders of magnitude faster in IE and FF. Is there a reason that AS3 pins the browser when AS2 does not? How can I embed multiple AS3 swfs into FF & IE 7 without pinning the browser? Is there a way to make an application that is more light weight?
I basically have multiple identical swfs on a html page, each containing an mp3. I need it so that when you play one.. it stops any others that are playing, to prevent the audio from overlapping and creating a mess.
I've tried using 'local Connection' which almost worked.. but just didn't seem to be well suited to this sort of thing.
I basically need to set up an interface in an html page with 3 different swfs in different spots of a table that need to communicate with eachother (basic stuff like going to certain frames within the targeted swf when a button is pressed, etc).
I'm pretty sure i've seen it done, but i can't seem to figure out what kind of approach i need to take. I'm guessing its going to take some javascript, but i'm not sure.
I went to pass a variable to an ASP page, the ASP will filter a recordset based on that value. I want the results of that filter to be passed back to my Flash page. I am, of course, using LoadVars() in the following way:
Code:
getserver="[URL]";
formdata = new loadVars();
formdata.SRV_NM=GA016DBB;//this is the variable I want to pass to my asp page for filtering
replydata= new LoadVars();
//this next section may be my problem
if(replydata.onload){
trace("yes!");
formdata.sendAndLoad(getserver, replydata, "POST");
} else {
trace("no");
}}
I have tried this and it doesn't seem to work. In the example below the movie on the right (boy in the hat) is embedded using this procedure but the two on the left (paws moving on order button and dog animation) had to be installed using Dreamweaver's swf installation methodology. and, consequently the dog animation does not show up in Explorer 8 and some other browsers.
[URL]
As I am getting more familiar with FMS and understanding it better with the help of the wonderful contributors here on this forum, I am now curious about players.Players such as Strobe and REOPS to be specific.Are players all SWFs that are embedded in a page? I have seen some players here on the Adobe website that are stand-alone smaller windows that appear over the page. How is this done?So Strobe and REOPS...are we talking SWF code that is editable? You can see I am quite new to this. I'm on a roll, however and wish to continue understanding and learning.
View 6 RepliesLooking for thoughts and ideas on establishing communication between isolated SWFs residing in a single HTML page. Need to place multiple SWFs in a single HTML page and was wondering if there was some way to send commands from one of the movies to the other wihtout reloading the page. (would prefer not to reload the page and all the components and have the page "blink" - go blank before loading new and cached data) Unfortunately cannot build this as a single flash object with multiple MCs.. must be multiple SWFs.
Have an idea or two on how to set this up with HTML framesets and loading subpages ( a cheat certainly and far less than elegant) but would prefer not to deal with the heartache that would entail - especially since areas of the page would still "blink" on loading.
How can I pass data to and from an aspx page tp AS3? IN AS2 I could use LoadVars . I have sen some examples and there seems afew ways.
View 6 RepliesI'm using <mx:LinkButton label="www.google.com" click="navigateToURL(new URLRequest(event.currentTarget.label.toString()))" /> to open a browser window to display the website on the label of my LinkButton. However I cannot correctly pass the link..
you see the problem: file://localhost/..myapp/bin-debug/www.google.com
How to pass the values SWF file to HTML Page?
forexample:
i type the user name and Password in Swf file. the username and Password is
shown in Html page. how to send the username and password in Html page?
I'm trying to pass parameters from my html page as querry string.[code]...
ie. no parameter is received from page. I've tried lots of changes.but couldnt make it.
I am loading in .swfs, that were exported from InDesign, using the page turn effect, into another swf that contains navigation. Would anyone know how I can make calls into the loaded swfs to trigger them to go to the next page, or report back how many pages the swfs contain? I can't seem to find any documentation on this?
View 7 RepliesI have a html page with a flash element. The flash element loads in an external swf. This works fine when I'm testing from the swf, but when I test from my HTML page the external swf doesn't seem to load into my main swf.
I have all my swf's in a folder called "swf". The HTML document is at the root level. In my main swf the actionscript for loading the external swf is:
[Code].....
Some how the path to the external swf gets lost. I've tried new URLRequest("soundComponent.swf"); as well. And like I said, this all works from the swf, just not when viewing from an HTML page.
I have a .swf file containing a navigation bar and also an animation. I was going to use getURL on the nav buttons so that a different html page would launch onRelease. The animation in the swf file that contains the nav buttons plays as soon as the swf is loaded and there's also a movie clip in the file which continues its animation even after the file has loaded and played. As each of the nav buttons are pressed and the correct html page loads, I don't want the entire swf file to reload and therefore play the entire animation again as it did on the home page, but instead I just want it to appear as though it's already loaded but I do want the separate movie clip in the swf file to continue to play. Is there any way to make this happen?
Also, I wondered what code I'd need to make the current page nav button appear in a different state to all the other buttons to make a "you are here" effect.
I am currently building a website and what i need to do is to call external swfs in an empty MC on the index page regarding which buttons of the nav you clicked on.It works, very nicely. But then i need to be able to preload another swf on the index when i click on a thumbnail.
e.g: index load the "who.swf" first. On the who.swf there are 2 thumbnail and when click it must replace the "who.swf" with contact.swf. It works but the only problem is that i cant make the preloader of the index to preload the empty MC which load all the external swf.
Is it because i am using loadMovie and not loadCLip.
I am trying to pass some values from my php file to my flash movie, and there is a button in it, when click will open a popup window which needs to be of certain size (due to rquirements). [code]...
I know i have to use javascript if i want a popup window to be of certain dimensions and thats where my problem comes in. I can get the popup window to appear using javascript, but my values now won't be passed into the next page once i use javascript inside flash.
I am aware that I can share simple Objects using LocalConnection, but this does not (in my limited testing) appear to work with NetConnection or NetStream.
In short, I wish to have a single SWF that acts as a NetConnection proxy for other SWF files in the HTML page. The client SWFs require direct access to NetStream objects on the proxys NetConnection.
Is this at all feasible, or will each client SWF require its own NetConnection?
I am aware that I could build the entire application in flash and utilize a single NetConnection internally, but this is NOT what I want to do.
Anyone know how I can go about doing this:
I want to create a sort of slide show with several SWFs and 1 html page. The SWF itself has FORWARD and BACK buttons (its a long story, but I can't just have FORWARD and BACK coded in the html), and upon hitting them, i would like the SWF to call another SWF to replace itself. (again another long story, but each SWF has a low size maximum, which is why I just cant make the entire thing one large SWF).
Annnnd, to make it all smooth and easy, I would like the forward and back buttons to be coded not with the specific SWF that they are calling, but rather with a function which will determine which SWF is currently displayed and then call the appropriate next or previous SWF from an array or list....