well i created some variables in the main stage level, with something like this:
for(i=0,i<10,i++){
var var_name="var_num_"+i;
this[var_name]="some value";
[code]......
Hiya, I am learning loading movie clips dynamically using the loadMovieNum() function but have run into a problem. When I load a movie into the next layer up from the current movie I still get the hand appearing over where the buttons from the movie on the lower level are (though the lower level movie and its buttons are not visible).
Is there any way I can stop this happening or am I going about things the wrong way?
I have a web site with an intro movie playing in the page's header.
The SWF playing the FLV with sound is in a division that is placed at a lower Z level. On top of the SWF, at a higher Z level, is a png image of my header containing an oval transparent window. This image acts as a skin sitting on top of my movie. The movie and sound play inside the oval window fine. I have other reasons for this approach as opposed to integrating the whole header image into the SWF.
The issue is I have no mouse control over the SWF because it is at a lower Z level. The mouse events are blocked by the transparent image window that sits on top.
I want to add a sound volume control to my movie. The control can sit either inside the oval area, or outside somewhere else on the page.
I would prefer to control the volume using another SWF that sits at the normal Z level where the mouse can work. Can one SWF control another?
Other alternatives might be to use Javascript, or even HTML image tags to control my SWF.
I have a zooming map .swf file loading in behind a navigation button interface .swf. The map.swf turns your mouse to a hand cursor so you can pan when you zoom in on it.Eveb though the map file is behind my nav file,when I roll over my nav file, the mouse is still turning to a hand cursor. Is there any way around this? The only time it turns to an actually pointer is when it rolls over the actual buttons on the nav file, so the mouse flickers back and forth between the hand and the pointer.How can I get the lower .swf to not effect the .swf on top?
View 8 RepliesI have a site with the main content loading on _level2, then I have a contact page that loads over _level2 on _level5. The contact page has a bunch of input text fields, if you use the tab button to go to the next text field it calls on clickable objects on _level2 as well as the text fields... is there a way I can write a script to disable all clickable objects on _level2 while the contact section is loaded, and then enable them once more when I unload _level5?
View 1 RepliesI'm trying to reorganize my code. I have a Paradox.as file, which is linked to a Paradox.fla file. When I referenced symbols placed on the timeline in my Paradox.as file, my animation code works. Then I decided to move the code lower down into the hierarchy. In my Paradox.as file, I create new instances of the Character class. The following is the folder hierarchy for the related files. * denotes a folder, and tab denotes its contents:
[Code].....
When you have movies in a layer, how can you stop the buttons of the underlying levels from showing through. I don't want the user to think that there is a button on the level showing because the cursor turns into a hand....plus also when clicked it does activate the lower movies actions.
View 1 RepliesI have a custom component extending Group and containing a viewstack child. The component is coded in actionscript.
When instantiating the component in mxml like so:
<components:CustomGroup width="100%" height="100%">
<mx:HBox backgroundColor="0xDDFF11" width="100%" height="100%" />
<mx:HBox backgroundColor="0x22DD63" width="100%" height="100%"/>
</components:CustomGroup>
...I would like to override whatever function that adds the children to the parent Group and add them to the child viewstack instead but I can't seem to find where the adding occurs. Breakpoints in addChild and addElement shows that they are not called during the add.
I have used the script below to load the mp3 file, but I couldn't do what I used to when I imported the mp3file to stage and I did it there. Is there a way to place fadeout at the end of the music and make the sound lower and lower, is there a way to apply something like that via Action Script?
mySound=new Sound();
mySound.loadSound("sommeu.mp3",true);
mySound.start(0,0);
I have an array variable called ball[#], which value starts at 0 and is incremented up to 8. I also have a corresponding array variable called _ballPlaced which returns true or false if a ball is placed in a target zone. What I would like to do is retrieve the array value variable from the ball[#] at any time. For instance, the ball[#] variable can be clicked and dragged, so when it's selected it becomes the event.target. E.g. How can I put the array value of the ball[0] in the ball _ballPlaced array.
ActionScript Code:event.target._ballPlaced[/* retrieve vale of ball[0] array i.e. 0 and put it in here */]
Can I call a variable declared in a SWF, and call the same variable into another SWF, when i am loading it using XML.I am declaring a variable in the "Child movie", and am loading this "Child movie" into a "Parent movie" using XML. Can I retrieve the variable declared in the "Child movie" in the "Parent movie".
View 1 RepliesNormally, I declare a variable at the very top of all my code like, var myObj: Myobj = new Myobj();...
but for some reason the the new variable being declared is necessary to present within the function, like displaying same objects in the library using for loop.
I notice that variable declare within a function will not be accessible outside the function or from another event handler or from another function....
I have seen code that make it possible my declaring a new variable?
Is it possible to access a global variable from an swf on a different level than another (outside of movies)? Or are they only global in the sense that they can be accessed from different scenes in the same movie? I want to check whether or not a certain movie (called by loadMovie) is on a certain frame (if else statement), and then act accordingly (tell it to play a certain frame in that movie [shut itself down, figuratively], or nothing).
View 5 RepliesI am writing a simple game in which the hero will need to jump on a trampoline. The thing is there are various trampolines (set as instance name tramp1, tramp2, tramp3 etc, and only one trampoline will be active at any given time. I have set a variable _global.level which decides which trampoline is active but how do I do the hit test?
So far I have:
trampland = _parent.ground.tramp2.spring.hitTest(this._x+8, this._y+32, true);
if (trampland) {go and do something}
But how do i tell which 'tramp' to use? I have been trying
_parent.ground.tramp[_global.level].spring,
But to no avail.
I have a movie clip on my main timeline that I want to send to a certain frame based on a variable that can be set from a nested movie clip, and also set from an external swf that will be loaded into the main timeline.So how would I set that variable? In AS2, I would just go _parent._parent...as many levels up as I needed to, but the AS3 equivalent only seems to work one level up.
View 6 Repliesim trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...
I have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline
mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1);
mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
This is making me a little kooky today. I thought I could defined a library path in PREFERENCES > ACTIONSCRIPT > ACTIONSCRIPT 3.0 SETTINGS then that library would be available to all AS3 FLA files, but that doesn't seem to work for me. If I use the PUBLISH SETTINGS and define the library path everything is fine.
Is there something that I could have done to disable the application level class path functionality? I guess I'm trying avoid having to set the library path for every new FLA I'm making.
I'm doing a bigger aplication in flash (as2).Image, there is a main "home" flash with several menu buttons.Clicking these buttons, I load external swf into an empty container in this "home" flash.[code]clicking buttons in this second level, will load external movies into an empty container in this SECOND LEVEL swf.This works fine, but now, coming to the THIRD LEVEL (don't think there will be more in the future) problems come up, some scripts won't work.Now (I'm a as2-beginner) I think, loading external swf ALLWAYS into containers in the first "Home" flash should solve the problem.But I don't know, how to load an swf from the third level into a container in the first "home" level.In the "home" level, I have a "close" button, that will unload the container content.I need to go to a certain scene "content_2" in the home swf, too.
View 7 Repliesi have game im doing, and i want it to jump to level 2 upon completing the first level, but the problem is, the level 2 is a seperate swf, i've tried to use
Code:
on (release) {
loadMovie("level2.swf",2)
}
I have called main.swf into a container in index.swf.
myMCL.loadClip("main.swf","container"); is an action on my Index.fla timeline.
I have my navigation on index. (i wanted it to go on main, but the nature of the animation meant it had to go on index)
I need to call "home.swf" into "main.swf" from the navigation button in Index.swf.
When I had the navigation on "main.swf" this was my code to call "home.swf" into the page.
on (release) {
Preloader_mc.gotoAndStop("home");
}
("home") is the label name where the preloader is for home.swf
how to call the preloader for home into main.swf from "INDEX.SWF INSTEAD OF MAIN.SWF"
I have a file1.swf which loads file2.swf into it. Within file2.swf i have a button that when clicked needs to remove file2.swf and load file3.swf into its place.
View 2 RepliesIs there a way to link to one level below the current level? Instead of saying _root.level1.level2.level3, something like: ../level3 ?
View 4 Repliesi was wondering if i set a variable on a button (the button is on level 5)
Code:
_level5.current_selection = "credits"
and i would like the movie on level 1 to recognize that this button (on level 5)has been pressed,is this script correct on an empty keyframe in level 1.
Code:
_level5.current_selection = "credits";
if (_level5.current_selection == "credits") {
loadMovieNum("credits.swf", 2);
[code].....
i've tried this and it isn't recognizing the variable.
Situation:
- We have a Flash application located on a SAP EP (let's say ep.x.com)
- We have a SAP ABAP Application (Webservices) on a SAP WebAS
server (abap.x.com)
- Clarification: This is not about Flash islands / but a normal Flash application communicating with WebAS ABAP via WebServices
Problem: Due to the changed security policy in Flash 10 this scenario does no longer work.
- A crossdomain policy file on root level cannot be deployed on root level
- The WebServices http/s headers cannot be modified, since the WebServices are generated by the WebAS IDE.
Comment: Technically there is a way to patch a WebAS ABAP,but this is not a practical / acceptable way in a normal SAP WebAS infrastructure.
Conclusion:- The above scenario (Flash from EP content / WebAS ABAP as backend) is a quite normal scenario in the SAP world.
- SAP / Adobe always features the close relationship between their technologies.
Question:- What could we do?
- How does the Visual Composer works around that problem?
I have a movie that's 500x400 px in level 0 and has lots of thumbnails with pictures that I want to open. the thumbnails open a 500x400 px movie above the other but on level 1. the problem is that when the new movie loads on level 1, the thumbnails on level 0 (that are now hidden by the new movie) are still active, and if i click anywere in the movie on level 1, it trigger an action from level 0. Is it possible to load a movie to level 1 that deactivates the movie in level 0 without unloading it?
View 1 RepliesI have 30 values coming from an xml file, and I need to programatically find out which of them is the lowest, then I need also to find out exactly where it is located, so I can get the value that is located next. What I mean is:
Let's suppose that on the following xml, Cat2 is the lowest value, I need not only to print Cat2, but also Dog1. So, I will need to find out how to get Dog1 knowing that Cat2 is the lowest value.
<xml>
<1>
<a>
Dog
[Code].....
I'm working with Adobe Flash CS4. designing website it's a tour guide so it has a lots of pictures in it that's making the file too large so when i test it takes awful long time or doesn't shows me anything at all.
View 1 RepliesI normally work with print design but am designing some flash banners for a client. Just have some questions about file size.My current banner is 125kb but they want it under 25kb. Is that practical for a flash banner?Also, I have done tests with import options and it looks like if I import my artwork as an .ai file and convert to symbol then it gives a lower file size than importing as a png or jpg.How can I make my file size lower? I know it's hard to answer without seeing the file but is there an option similar to 'save for web' in photoshop where I can adjust the quality to reduce file size?
View 1 RepliesI'm try to lower the contrast of a movieClip, but it seems to have no effect. contrast, saturation, brightness do nothing.
My Code:
var bobRun:MovieClip = new bobRunning(); addChild(bobRun); bobRun.scaleX = .45; bobRun.scaleY = .45; bobRun.x = 350; bobRun.y = 30; bobRun.contrast = -100;bobRun.saturation = -100;bobRun.brightness = -100;
