I've got twenty .swf files and respectively .as extensions of them. In each file there's my e-mail, but I don't have access to that e-mail anymore, so I want to edit each file to remove it. Is there any way I can change my e-mail in twenty files and compile them afterwards in an automate process via some script ?
View 1 Repliesive been creating .FLV videos using premiere. Inorder to view them in IE, do I need to use the 'Flash' software to create a .SWF? I'm a little lost in the process post edit --> web
View 4 RepliesI've created a multi-file interactive Flash "demo" for a client. It's very much like a website (though he's not using it as a website) in the way that it is laid out in that there is a main index page which can then direct you to different product categories, which you can click on to see. Each "page" contains product (or product category) information, photos, block diagrams, etc. There is nothing animated in the Flash.
My client also wants to be able to set it up so that the demo runs automatically from a configurable XML file. My ActionScript skills are pretty limited, but I've been able to using ActionScript 3 to load and read the XML file. Using a 'for' loop, I am able to read the XML file and return the path of each Flash file and the duration that each file should be displayed (my client requested that he be able to configure the duration of each page as well).
I've set up a loader for each movie clip and a timer for the display duration. Unfortunately, the thing that is throwing me off is that when I attempt to load the movie clip (as the last item in the for loop), it reads the entire XML file, returns all of the clips and durations (I'm using trace to see this) before it loads the movie clip. As a result, the only movie clip that is loaded is the last one read from the XML file.
As I said, I'm not very good at ActionScript, so everything that I've managed to cobble together has been from internet tutorials.
This is my code:
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
var mcLoader:Loader = new
[Code].....
I removed the timer event because it, like everything else was getting repeated before anything got loaded, so I wanted to figure out out to get the clip loader (mcLoader) to load the movie clip for each file before I figured out where to put the time to ensure that each clip is displayed for the appropriate duration. I suspect that the timer event needs to occur in the 'playClip' function, but would take advice on that as well.
I tried to drag in from Photoshop a layer with an image and transparent background, but it turns white in Flash, so I imported the image from psd. However, the black background is interfering with the placement of the image. In OLD flash, there used to be a magic wand and the ability to select areas of the bitmap and delete, but it seems that the feature is now missing or hidden in new flash. I turned the image into bitmap and I don't want to trace it, because it is a photo. So, without tracing, how do you now edit the image as I'm trying to do?
View 2 RepliesIm pretty new with the flash -> php -> mysql thing .. And I have made a script that sends some variables (that a user inserts in some input forms) with some var names, and then php handles it and insert it into my MySQL database its kinda ugly that a page pops up and opens the php page.So I was wonderin' if there is some way to send the variables to the php file and process them inside the flash file. without openin' some fancy browser window ?
View 3 RepliesI'm actually relatively new to flash and actionscript but I could say I have fair knowledge about them. So anyway, I usually build flash websites the traditional way using timeline animation and scripting. Today I had a job interview and they said they're looking for someone who can develop any web design into a Flash CMS with a back-end office for the client to edit the content without having to edit the FLA file or any code.
Accordingly, I'd like to know where and how to start. What are the main concepts I should follow/adapt?
How to edit flash file (.swf) without .fla file ? I got banner in swf file and a need to make something like that:
when user click on that banner he will be redirected to an url (for example [URL]
I am looking for utility/helper classes for Adobe AIR/actionscript 3.0 file system and native process utilization. Could someone point me to opensource library projects specific to Adobe AIR..
View 2 RepliesMy web designer is no longer working and has left me with a flash file which would benefit from a small edit
The file is made up of a banner which rotates between 3 images. I'd dearly like each of the images to become a link to html files already uploaded to server
The banner can be seen at self catering accommodation belfast dot com
Is it possible to request this on the forum please?
What I mean is that several jpg file will be sent to the server and replace the images that embedded in the file and a exe file will be created from the new file.
I know that I can keep the jpg outside the file and just call them dynamically but I just need to use them in that way.
Is there a way to create a flash file on the fly by a script?
i have a player which is of swf file. I need to edit it to remove user defined conextmenu.( when i right click its showing one name, i need to remove that)
how i can edit swf file in flash. when i open swf file in flash am unable to edit anything.
u can see the flash player here [URL]
I have one swf file, it is JW Player plugin. It have one actionscript file in which is whole plugin code, and rest of files are jwplayer api files. So i need to open that file (where whole plugin code is) and edit few lines. But there is a problem, because when i try to decompile file with sothink swf decompiler (and few others) - to convert it to .FLA, decompiles simply crashes. It is because of some file from jwplayer api library. So, next thing i tried is to edit via HEX (because there is not much to be edited), but i couldn't find what i needed. So what i need is - is there any way or not? If yes, which program can be used for this?
View 2 RepliesCan I edit PHP/HTML file with flash? For example, like PHP files can edit TXT files. Can I make flash to edit the whole content of PHP or HTML file?
View 2 RepliesIsn't possible to edit an audio file using flash as3. I mean the user dhould be able to select a few portion of audio file, then he needs to edit that portion.
View 2 Replieshow to edit a text file?? say i put a text file on the net called myTextDoc.txt and its got no text in it and their is a flash document with a text feild in it with a submit button and when someone types into the text feild i want it to edit the text file
View 1 RepliesI wish to get some data from a flash site. Now it is not possible to get the data directly from html. Now I have noticed using firebug that a xml file is sent to the browser containing the data I want, when I click on certain parts of the flash site. Is there any way to automate this?
View 1 RepliesI can't seem to remove / unload the external swf files e.g when the carousel.swf (portfolio) is displayed and I press the about button the about content is overlapping the carousel (portfolio) . How can I remove / unload an external swf file from the main flash file and load a new swf file, while at the same time removing garbage collection from memory?
View 15 RepliesI'm trying to edit a flash file embedded in Dreamweaver CS4. I can't open the file the only thing it will do is play. Can FL CS4 open and edit FL CS3 files?
View 2 RepliesHow to edit the .fla file code and save it in the .swf format? I downloaded the trial version of adobe flash.I am able to see the output frame but not source code.
View 3 RepliesI tried hard to do this myself, but it isn't working. I would like to offer $20 to anyone who can decompile this flash program, edit the actionscript to load an xml settings file from URL (instead of loading the one compiled with the program), and package it up for me. My main problem is that it doesn't decompile in a way that runs when recompiled with the programs I use.[code]...
View 2 RepliesHow do I go about automating conversions from powerpoint to flash?I want a user to be able to upload a powerpoint file into my web page and on the server I want to convert the powerpoint to a flash movie. Is there any preferred method for doing this?
View 3 RepliesI'm searching for a scriptable/automated way to have the latest version of Flash installed on Windows XP and Windows 7 testing machines.
These machines serve testing purposes, however, because of the number of different machines we have, it is unwieldy to update them all by hand.
How can the installation of Flash be automated?
My goal is to make a flash/as3 program that would pull multiple sets of data (images and texts) from the database and compile and save a flash video project for each one. What might be the best way to go about making this work? I checked but wasn't able to find a function that would publish the flash project in it's current state, so I don't think I can execute the entire process in a single flash/as3 file. My only other option is to have some other program/batch file take care of the querying the database and compiling multiple flash/as3 movies by starting up a flash program and passing it the parameters of the data it needs to build 1 complete project for 1 set of data. Is there a program to create .swf files automatically? Is it even possible to pass in init params to flash/as3 project?
View 1 RepliesI'm creating an in-house application in flash for my company. I'm pulling a ton of info from a single XML file located on our server. Ten interns will be using the application on their laptops (Air 2.0). Having the data load and populate the application is not a problem. I would like them (in the application) to be able to edit an existing node value (loaded from the XML) and save it (back to the XML file) so that the XML file updates with the new value and the other 9 interns would see the change on their application.
I figure I'll need some kind of php set up, but everything I've read so far deals with creating new nodes. I need to edit and update existing node values from an existing loaded file.
Here's a very simple example of the XML:
HTML Code:
<INVENTORY>
<CODE>x1234561</CODE>
<NAME>Code1</NAME>
[Code]....
I am trying to send a couple basic text commands to a flash program running in Firefox on Windows 7, but I am unable to get pywinauto working for me. Right now, I have just been able to accomplish the very basic task of connecting to Firefox plugin-container by directing it to the path using the following code:
[Code]...
I'm edit a flash file that uses about 11 different fonts. When I toss it into the editor and publish it some characters are missing from the product, such as W's and M's. I've installed the fonts that were included with the flash file into windows7.
View 4 RepliesI have a desktop flash application (.exe). Is there a way to automatically update the client's software to the last version?
View 3 RepliesI am in the middle of creating a website using Flash CS5. I opened up my .Fla file one day to continue my work but I am no unable to access buttons and movie clips. When creating movie clips or buttons I am unable to get inside them, when I hover my mouse over them there is a white hand icon which never used to be there it was always just a normal mouse icon. I double click to enter inside the buttons/movie clips but nothing happens. This happens to existing movie clips and buttons on the page and even when I create new ones. I really don't wanna have to start this website again.
View 1 RepliesUsed the following code in a real life demo. I clicked the button, SaveAs dialog displayed, I chose to say the file in the Documents folder.Went to open the file, and got a message saying it was in use with another process. Restarted my computer, was now able to open the file. However the file is empty. It should have some text that I put in there - how can text vanish from a file? By simple downloading it.
[code]...
how to put the code into the HTML file to complete the clickTAG process for a banner ad.
I have put the following code onto the button (covers whole ad):
on (release) {
clickTAG = "http://" + clickTAG.slice(7);
if(clickTAG.substr(0,4)=="http") getURL(clickTAG,"_blank");
}
but I need to know what to do with the HTML doc....Is this how the ad goes to the intended location like a regular URL link would?