im loading a child swf into my parent swf and I want to pass some parameters to the child swf.
Here is my code:
var req:URLRequest = new URLRequest( "test.swf" );
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener( Event.COMPLETE, loadComplete );
loader.load(req);
[Code]....
I have a problem with my New Loader class I use as3 and buttons to load external files into into my main swf file and I resize the external files to match my stage but they always load from the top left at x=0 y=0 The action script i use is
var swfHolder = new Loader();
mybutton_btn.addEventListener(MouseEvent.MOUSE_DOW N, mousedownpresser);
function mousedownpresser(event:MouseEvent):void {
addChild(swfHolder)
swfHolder.load(new URLRequest("myvideo.swf"));
Is there any way I can load the external files into a different position?
is it possible to get the total frames from a .swf being loaded via a flash.display.Loader class so i can calculate duration in seconds of the clip?
View 2 RepliesIf I load an external swf:
my_loader.load(new URLRequest("abc.swf"));
addChild(my_loader);
abc.swf starts playing - how do I get it to tell the main movie that it reached the end of its timeline and finished playing? Added bonus: the loaded swf is AS1 and the main movie is AS3. I'm not sure if I could convert the loaded swf to AS3.
I'm hoping to implement a preloader on a main.swf that measures the bytes etc loaded in an external.swf. My two concerns are that 1) this just isn't possible? 2) I can't have multiple preloaders on the main.swf, which I would if I used one for the external .swf. I intend to try and explain this in the best way I can what I have done so far, as I personally feel this is quite a complex task.
Here's the basics:
I have an external .swf file, being loaded, using the following Action Script (3), in what I shall call, main.swf:
//---loader---
var swfLoader:Loader = new Loader();
addChild(swfLoader);
var swfURL:URLRequest = new URLRequest("nameofswftobeloaded.swf");
swfLoader.load(swfURL);
function loadHandler (event:Event){
var thumbsPanel:MovieClip = event.target.content;
addChild(thumbsPanel);
This works fine. The Action Script I use after this simply allows me to control the external .swf from the main .swf so isn't necessary.. I finish the loader, with this:
"swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadHandler);"
So, this all works fine. However, as the external .swf contains images, it doesn't load instantly. I therefore need some kind of preloader to show how much of the external .swf is loaded. However, I tried placing this in the external .swf itself and it failed miserably - for some reason it basically didn't preload and the completed phase of the preloader just appeared.
I'm having troubles accessing the data loaded by external class.[code]...
Now, I want to create another external class (called MainMenu) that will be initiated from the Main class.This class should create the menu based on the loaded XML class.
My question is, how can I make use of the loaded XML content via XMLLoader class within the MainMenu class?
I have a Main.fla (with Main.as as document class) that calls the external SWF (which has its own document class too)
ActionScript Code:
function startLoad() {
mLoader = new Loader();
[Code]....
Another question. Is it possible to do some kind of listener? Example, I call this external swf, and if the user press a button inside this external swf, this button triggers the listener on the Main.as? Something like running an external mini game, and wait for the results/hiscore.
I am unable to unload content loaded by loader class.
View 4 RepliesI have a custom class being constructed from my main class. In the custom class it has another custom class that is passed in as a parameter. I would like to strictly type the parameter variable but when I do, 'the type is not a compile type constant etc'.This, I understand, is because the custom class used as a parameter has not yet been constructed.It all works when I use the variable type ( * ) to type the parameter.I suspect this is a design flaw, in that I am using an incorrect design pattern.It is actually hand-me-down code, having received a large project from someone else who is not entirely familiar with oop concepts and design patterns.
I have considered using a dummy constructor for the parametered class in my main class but the passed in class also takes a custom class (itself with a parametered constructor). I am considering using ... (rest) so that the custom classes' parameters are optional.Is there any other way to control the order of construction of classes? Would the rest variables work?edit)in main.as within the constructor or another function
var parameter1:customclass2;
customclass1(parameter1);
in customclass1 constructor:
[code].....
Using ActionScript can I do with my game, which is running in a browser, verify that the user already has the files needed to run the game installed on your computer? If he had these files do not need anything else that was born and can play the game immediately. If he did not have the files, they would be loaded so that the browser does not erase these files. So when he returned to play the same game day after,as the files already on your computer, nothing need be loaded.How do I remove one of the main memory image that was loaded using the Loader class? I tried using the unload () method but nothing happened.
View 2 RepliesI have this code in a class:
Code: Select allpackage com.jhoyt{
import flash.net.URLRequest;
import flash.events.*;[code]....
and I have this code on the timeline of the movie its being loaded into:
Code: Select allimport com.jhoyt.SSIlaunch;
var ssi:SSIlaunch = new SSIlaunch();
addChild(ssi);
I know its loading because I can put trace actions into the addAndPoint function and it gets called. what can I do to make it display?
I have this code in a class:
[Code]...
I know its loading because I can put trace actions into the addAndPoint function and it gets called. what can I do to make it display?
I've builded this XML gallery, and suddenly Im getting an error when Im loading the pictures. Its only sometimes the error comes. TypeError: Error #2007: Parameter url must be non-null. at flash.display::Loader/_load() at flash.display::Loader/load() at imageviewer_xml_subcats_fla::MainTimeline/allLoadXML()
[Code]...
I am using the Loader class to load 3 external swfs: sharedTopics.swf (does not have a document class) fonts.swf (document class is FontManager) main.swf (document class is Main) The same loader is used to load all 3 assets.
[Code]...
I am calling java servlets from flash using the following code [below is a sample Flash code for calling a java servlet in Flash which I am using]:
String url_String="[URL]"; var req:URLRequest = new URLRequest(url_String);
In this case, the servlet is called/working fine only in my system where the flash application is deployed & not working when I execute the application in different system using the "IPAddress" of my system. So, What changes I need to make in above Flash code in order to call the same servlet successfully from my system and as well as from other systems? (OR)
Is there any need to pass the servlet-url's relative instead of absolute? If so, How can we pass relative-path of url's in Flash? && Can anyone explain me with an example? How to change my above code to pass the url 'relative' rather than 'absolute'? If I pass the url relatively, does my issue gets resolved?
I am trying to load an image. The image paths are stored in an xml file called "setup.xml". I'm getting the strangest error. Never seen it before.
[Code]...
How to access a loader loaded by a loader
View 4 RepliesI need to pass a struct and a string in a web service. I am using a WebService components to do so.upon my search, there is no struct type in actionscript and so I used a class for that one.
public class UserInfo{
public var name:String;
public var dateAdded:Date;
}
and I'm filling it up so that I can pass it on the web service like this:
var newUser:UserInfo = new UserInfo();
newUser.name = "myName";
newUser.birthdate = new Date();
webServComponentId.operationToCall(newUser, "password");
Upon sending this request, it prompts me an error of Error #1088.
the component that is being called by webServComponentId.operationToCall(newUser, "password"); is this:
<s:WebService id="webServComponent" wsdl="[PATH OF WSDL HERE]" >
<s:operation name="operationToCall" result="functionToCallWhenResult(event);" fault="Alert.show(event.fault.faultString)" />
</s:WebService>
Basically it is a web service via MXML. So when I call the operation, it always go to fault part and shows Error #1088
is there a way to set the loaded SWF's height and width to always use 100% of the Loader's height and width? pretty much like when you're embedding a swf to an HTML page... I know that you can do this by setting the width and height of the Loader on every stage resize, but is there another way wherein you can just specify height and width is 100% and then loaded SWF will automatically resize according to stage and Loader's current dimensions?
try loaded a SWF file which has coordinates based listeners and it seems that the loaded SWF doesn't reposition its listeners correctly even if the stage is already resized... take this swf for example [URL] i tried using an SWFLoader in flex which scales the content and also a normal AS3 flash.display.Loader and it seems that both fails to reposition the listeners correctly.
I'm working on an accordion component and I was thinking that it'd be cool if I could write a very basic one and then set it up so that it would be possible to pass in any kind of container class and child class so long as they subclassed a particular parent or implemented an interface (haven't really gotten that far yet).
What I've noticed though is that I can't setup a default class for my constructor parameter. For example I'd like to do this:
Code:
public function DropDownList(containerClass:Class = ContainerSprite, childClass:Class = ChildSprite)
However it gives me the following error:
1047: Parameter initializer unknown or is not a compile-time constant.
[Code]....
I have a shell swf that is loading a swf. How do you have the loaded swf tell the parent loader to unload itself after the loaded swf finishes playing?
View 4 RepliesI'm using Loader::load() successfully to load swfs into my main swf and then I add them as a child of a Sprite. When other events occur I want to remove the swfs as needed. I have looked at unload() and at removeChildAt() without success.
I only added the addChild() call to try to pin down the loaded instance so I could remove it. The loading works fine without the addChild();
I have also tried publishing to player v.10 and using myLoader.unloadAndStop(); but this has no effect either;
The following demo code shows my problem. I see one child added and one removed but intro.swf is still playing away.
import flash.display.Loader;
import flash.display.Sprite;
import flash.display.LoaderInfo;
[Code].....
I've a Flex application which loads a Flash swf via SWF loader; the Flash swf is in AS3. the flash swf has code to dispatchEvent a Text Event
Flash Code:
var re:TextEvent = new TextEvent(TextEvent.TEXT_INPUT,true,true);
Flex Code:
<mx:SWFLoader source="menu.swf" id="mnu" complete="menuLoaded(event)" />
private var mySwfMve:MovieClip;
function menuLoaded(event:Event): void {
[Code]....
I don't see any TextEvents being dispatched from Flash. They are not seen in the debug trace.. I can capture enter frame events however.
I want to load an external image (dest) and display it on the stage, and i want to load another image (src) which will not be visible. When i hold the left mouse button on the image that appears on the stage, then a function that start copies the src image to the dest will be invoked. Actually i want to reproduce the scratch effect on an image that hides another underneath. here is my code [ the copypixels function is triggered on mouse_move event for debug purposes ]
package
{
import flash.display.Sprite;
import flash.display.BitmapData;
[Code]....
Although the two images are loaded into memory and the first one is shown on the stage, when the mouse_move events triggers the corresponding handlers the copy does not work.
i made a SWF which contains a loader which loads any SWF file passed to it... the problem I'm encountering is that for some SWFs, some event listeners doesn't fire anymore... my own SWF file (which contains the loader) doesn't really have any other element except for the Loader object and so I cannot understand what seems to be preventing the loaded SWF (loaded by my Loader) from receiving some mouse events
it seems that the for the SWF where I'm having this problem, the listener seems to be tied up to a location in the stage or somewhere else, and so whenever I resize, the listeners is not responding on the right place, for example, the button appears on a certain position but the listener's hit test or whatever the SWF is using to detect the mouse click is positioned somewhere else
I'm displaying an external image in Flash with the loader object, and then addchild() and that whole thing. Im wondering how, if possible, I could then add that same child to another movie clip. So far, when i do, it doesn't show up in the original movie clip anymore. Is there a way for me to display an image twice by pulling it from the same source like you would do with html,css?
View 1 RepliesFor the project I'm working on I need to dynamically load a SWF and then an imagine on top of that SWF. Based on mouse overs and the like that image will fade in or out. I have the dynamic implementation down, I just cannot quite seem to figure out how to manage the image file that overlays the SWF. Here's a snippet of the code I'm working with:
Code:
var ldr:Loader = new Loader();
var urlReq:URLRequest = new URLRequest(thisOne.src);
[code].....
My problems comes in when you have to open a different image album and have to eliminate all the previously loaded children in the movieclip. When i load a new album i used a code you posted here: AS3 How to remove previous loadersbut the problem is that sometimes the user leaves the album page before ALL the pics laod so when they click on a new album to open it a new image is placed somewhere else cause the loader has already been launched. I've tryd to close() the loader but it doesn't seem to work.Here you can see the working site to see what im talking abouy you have to click on an album, leave before all the pictures load and open up another one.
getImage(dataList[0].file)
function getImage(href:String):void {
var loader:Loader = new Loader();
[code].....
I have two SWFs: a Loader SWF, and a Loaded SWF. I need to add the Loaded SWF to the display hierarchy, but I don't want to give it free access to the stage. It may, for instance, attempt to change the scaleMode, and I don't want that to happen. What are some good methods for restricting loaded content's access to the stage? I may, for instance, want to allow it to access the stageWidth and stageHeight, but not the scaleMode or align.
Additional Constraints. I can't change anything about the Loaded SWF. Both SWFs are in the local-with-file-system sandbox. These SWFs are both Flash Player 10, ActionScript 3, made in Flash Professional. Not AIR, not Flex. I'd love to be able to implement a proxy class or a getter to somehow intercept calls to the stage, but I don't believe there is any way to.
I don't believe, for example, that you can subclass the Stage class and use that subclass in place of the normal Stage object referenced by the stage property in all MovieClips. The stage property is read-only, so it can't be cross-scripted by the Loader to point to something different.
Google calendar is available to be embed into a HTML website.. But I have a Flash site.. I want to load that calendar into my site.. It has an option for a button. But would like to have the entire calendar view. Can this be loaded into a dynamic text box or a loader component??? Does anyone have a clue how to do this... Or create a monthly calendar with events.. I can't seem to find one anywhere, I am sure it can be done.. but not very good with AS.
View 1 Replies