Not sure this exist, but worth asking you all: is there a built in method to compute the distance between the current mouse position and a given component? If not, is there a simple way to build a function like this that works for components with generic shapes?
View 2 Replieshow to detect the distance of the mouse movement in a certain time. I d like to be able to calculate the distance the mouse was moved from one point to another in certain time (one second) and compare these values.
View 2 RepliesI am wondering if anyone can share with a good example on how to detect the distance of the mouse movement in a certain time. I'd like to be able to calculate the distance the mouse was moved from one point to another in certain time (one second) and compare these values.
View 2 Replieshow to detect the distance of the mouse movement in a certain time. Id like to be able to calculate the distance the mouse was moved from one point to another in certain time (one second) and compare these values.
View 0 RepliesI created a movie where I have a circle in the middle and a line drawing from the center out when the mouse moves. I want to calculate the distance from the mouse position to the middle of the circle. What I am going to do is have a sound playing from the center of the ball..The closer you get the louder the sound gets and the further away from the middle the quieter it gets. You can download my fla to see what I have so far.
View 1 RepliesHow to detect the distance of the mouse movement in a certain time. I'd like to be able to calculate the distance the mouse was moved from one point to another in certain time (one second) and compare these values.
View 3 RepliesWhat I am trying to do with AS3 in Flash cs4 is calculate the cursor's distance to given point (let say 400,300) and use that distance to constantly (20 fps) change my curtain's alpha value. (which is basically a box turned into a movie clip) [code]...
View 5 RepliesHow to keep a MC a certain distance from the mouse cursor regardless of angle?
View 10 RepliesHow can i calculate the mouseX distance from an MC?
i'm using this:
Code:
enterFrame event {
var d1:Number = pi(mouseX,dist0.x);
var d2:Number = pi(mouseX,dist4.x);
[Code]....
I have an image and I need to be able to click on 2 different points within the image and be able to have it tell me how far apart these 2 points are.
View 7 RepliesI'm trying to figure out how to make an object move vertically or horizontally a set distance once the object has been mouse clicked and then stop. Sounds relatively simple, but I'm pretty clueless at it.
View 2 Repliesim building my site now and i want to have background of hexagons that get visible only when the mouse is at certain distance of them, so i found out that i have to use as3, ive read some tutorials and other post and i tried the following code that i found online:
stage.addEventListener(Event.ENTER_FRAME, showDistance);
function showDistance(e:Event):void{
var distance:Number = (circle.x, mouseX, circle.y, mouseY);
[code].....
In felx, how to send the id of the component ( on which the mouse pointer is clicked ) to a function with the mouse click?
View 1 RepliesI am working on the project where everything is based on the distance from the center of the stage. First I made this fla where flash outputs the x and y distance from the center. First problem is that I want to output distance only in positive numbers.
View 1 RepliesI am posting my code that attaches the movieclips on stage
[Code]...
i was hoping that when the newMc expands, all other mc would keep the same distance between each other as at initialisation. I not able to figure how to do it. maybe even an earlier post or llink where similar query was explained.
I have a component that extends UIComponent of Flex, I want to add it a FlexMouseEvent.MOUSE_DOWN_OUTSIDE listener but it does not works. that means I can not capture the event. But when I use PopUpManager to add this component, and then add a FlexMouseEvent.MOUSE_DOWN_OUTSIDE listener, it works fine. Is FlexMouseEvent.MOUSE_DOWN_OUTSIDE only works for pop-up components?
View 1 RepliesI'm trying to determine with the help of a mouse event if I'm over a specific component. So right now I have two components, let's say buttonA and buttonB. ButtonA has a listener on it already listening for the mouse out event. ButtonB is flush against the edge of ButtonA. I need to find out the code for it. Here is more details:
[Code]...
I am aware that the follow will show a hand cursor:
component.mouseChildren = true;
component.useHandCursor = true;
component.buttonMode = true;
When I do the above on a List component, the hand button is shown and the whole component loses it's interactivity (Hand cursor is shown even on scrollbars).
So how can I show the hand cursor only when rolling over the list items?
Is it possible (if so how) to find out what word the cursor/mouse is over when it is moving over a < mx:Text > component?So for example as the user moves the mouse along a sentence (inside text component), each word will highlight as they go (I know you can highlight while pressing the mouse button down - but that not how I wish to do it).
View 2 RepliesIn AS3 I am trying to get the distance between 2 3D objects by using distance method.
if(Vector3D.distance(model.position,model2.position) < 100)
{
// do something
[Code]....
>>You can use it directly as a method of the Vector3D class to get the Euclidean distance between two three-dimensional points.
Which point does this method pick? Is it the closest point to the other object ?
I am just thinking of how much time this would take in testing objects with large poly count.
I've noticed that an "out of the box" HDividedBox has some serious flickering issues when liveDragging is enabled, but only when the pointer is over the contents of the DividedBox while dragging. If you grab the BoxDivider and move the pointer off the component while dragging, the flicker goes away and the component renders properly.
I have tested this with both my customized component and an extremely basic HDividedBox implementation with Group, SkinnableContainer, and BoxContainer children as well as nested groups with clipping.All types of children exhibit the same behavior.
<mx:HDividedBox width="500" height="200" liveDragging="true">
<s:SkinnableContainer minWidth="0" backgroundColor="green" percentHeight="100"/>
<s:SkinnableContainer minWidth="0" backgroundColor="blue" percentHeight="100"/>[code3].....
I have built a Air 2/Flex 4 kiosk application with Flash Builder 4. Currently I am implementing a touch screen browser to enable users to navigate company training videos. In an attempt to improve the usability of the website on the touchscreen I have placed the HTML component in an adaption of Doug McCune's DragScrollingCanvas (updated to use the flex 4 'Scroller' component) to allow users to scroll the webpage by dragging their finger across the screen. The mouseDown event is used to start scrolling the viewport.
In addition the webpage was modified to disable text selection with the following css:
[Code]...
As an alternative I also tried adding a group container with the same dimensions as the HTMLLoader to detect the mouseDown events (so that the group container and HTMLLoader have the same Dragable parent container) and was able to capture mouseDown events and scroll the viewport as expected. However as the mouse event is handled by the group container, I am now unable to navigate the webpage.
So I have that panel or any other mxml component. I want somehow to rotate it around like a wheel of a car with which you drive it... loke a Racing wheel... sow like when mousebutton is down it captures pont of component... when you move mouse component rotates (not moves) according to new mouse position... How to rotate MXML component round its center like a wheel respectfully to mouse?
View 2 RepliesI have a component "child" which has a cancel button. Now this component is placed in a state called "newChildComp" I also have another component called "parent". In the parent component, i have a button that dispatches an event. Here is the event code:
[Code].....
so, basically,i am checking to see if the cancel button component in the Child component, while i am still in the parent Compoent, was clicked, if it was clicked, call the cancelButtonHandler. The problem is by the time the addNewChild handles the event, that cancel button was still null. My question is how do i solve this without using the itemCreationPolicy on the cancel button?
how to increase the distance between the text and the check box in flex ?
View 1 RepliesI have a LineChar, with one LineSeries, on which i am drawing values ( Y axis ), on specific time ( X axis ).The problem is that i don't wanna the points which is distanced on a specific distance in time ( let say 6 hours ) to be connected.Is there a way to make LineSeries with DateTimeAxis not connecting points distanted in specific time ?
View 1 RepliesI'm building a top view 2D map, that it's objects are stored on the server.The kind of objects are 10 and might be a photo, label, button, lists, mix of them or labels with tooltips.The component must request the "areas" that are missing on screen.An area is 1000x1000 px and is cached in flex.To move in the map, will be like in google maps (drag-and-drop).I should be able to have another list and move objects from one to another using drag-an-drop on objects. Ex.: I grab an objects from a list and I move it on this map, I release the mouse button and the item is placed there.Now the problem is: I build a custom component for this trying to emulate the item renderer for performance and recyclage, implement drag-and-drop on objects and request the areas that are missing?
or
I extend the List component from spark and I add some features as multiple kind of itemrenderers and use recycle on them. Of course it must be able to request the missing areas on the screen and cache it's data.Maybe create a custom layout is needed too.What I need is something that must be really fluid, so the lighter this component is, the better.
UPDATE: *There will be not any object over another.
*I will not use hitTest on bitmaps because all bitmaps are wrapped in another component,as they,for now are itemrenderers.
Anyway I already begin to do this using a class that extends the SkinnableDataContainer and a custom layout. As the layout is not like a grid, is sparse, random items at diferent points(x, y).How to get the localX and localY, relative to item renderer and not to the Spark List, from a DragEvent in Flex 4?
I have two components. One is called "InsideComp" and one is called "OutsideComp". OutsideComp has InsideComp as one piece of its component, and in my main MXML file, I have embedded an instance of OutsideComp. How do I access a public variable of InsideComp within my main MXML file?In Actionscript, I could just do something like:OutsideComp.InsideComp.valToChange = 5; But I dont know how to do it in MXML. I know this is probably an easy question.
View 4 RepliesI would like to bind two components with out binding and which resides in different MXML.for eg: A.mxml has textinput and B.mxml has a combobox when choose one item in B.mxml selected item should be display in A.mxml textinput.
View 2 RepliesI have a component with a public variable declared
[Bindable]
public var mnuSource:String;
When I extend this component, I can reference mnuSource (it compiles) but Runtime complains about the property not being accessible (error 1056).
How do you modify / declare component properties so they are actually available to other components?