I have a custom component which contains many promptingTextInput controls. When i click a button, I want the text field of all the promptingTextInputs to become blank. (Note: I have around 60 promptingTextInputs) How do i access the controls dynamically ? I am looking for a flex equivalent of $('input[type=text]') (like in jquery).
View 1 RepliesI use a popup loaded from different MXML file:[code]The problem is I don't know how to pass text values from text inputs to the main component after buttonOK is clicked in the popup. I tried custom events, but it didn't work.url...
View 1 RepliesI created a somewhat custom Spark button by doing the File > New > MXML skin and basing it on spark.components.button. The problem is that I need to add an extra text field to the button component and dynamically change that text...but of course, the property isn't recognized on a Spark Button.
Is there a simple way to add this field to my custom button skin & its property so it can be addressed? If not, is there a simple way to take what I've done and just extend the Spark Button? I can't seem to find any examples that show how to do it without writing it all up in ActionScript.
I'm trying to use a custom Text component to show a series of comments. I got the original idea from:
[URL]
I've got the base case working but I am stuck with 2 problems I cant seem to figure out:
Since I am drawing around the text, the actual height of each bubble is greater than that of the Text field, as a result, the last bubble is always chopped off. I have tried explicitly overriding the height getter, and adding some padding, but I cant seem to get it right. You can see an example here: [URL] In my layout, I have 2 VBoxes (one nested inside the other). The first vbox shows a form where the user can enter a comment, and the second box has all the comments. In order to ensure that the scrollbars only show up on the second box, I set minHeight="0" on the nested VBox, but then for some reason, some comments' text is shifted to the right. You can see an example here (look at the first comment): [URL]
Rather than posting the code here, I've provided some links:
[URL]
This is NOT duplicate of my earlier post (its is slightly different)But this is similar issue with similar error but its not the same error The error I am getting now is below while dispatching the custom event from my custom component
TypeError: Error #1034: Type Coercion failed: cannot convert events::MapEvent@a74ab51 to flash.events.MouseEvent.
dispatchEvent(new MapEvent(MapEvent.CLICKED_ON_MAP));
Note: The error in my earlier post is giving below error message
Type Coercion failed: cannot convert flash.events::Event@81ecb79 to com.events.ShopEvent
The difference here are two things, the earlier error is while converting flash event to custom event and now this one is while converting custom event to flash event and secondly, I have no clue why it is trying to convert to the mouseevent where I am just dispatching my custom event with proper listeners.
This is my custome event
package events
{
import flash.events.Event;
import ui.map.MapElement;
[code]...
i have an application in which i have around 100 textinputs all are numbers
i want to simplify the addition ie. any other way than saying txt1.text+txt2.text.....
that would increase my code a lot
is it possible to have (n+=txt*.text) or some thing like that
I want to create a table like structure in Flex, with labels as header. The rows entries might be a check box or a text input box,Like give below.[code]Or can I create a data grid and have text input boxes or check boxes as column values?
View 1 RepliesI have a movieclip created in CS4. I export that into my Flex Project's /lib and then try to access the text. All the textfields have ids, embedded text, and show up in intellisense. But when i run the project, the textfield is blank. What is going on?It appears to only not work when the text is embedded. Non embedded text works fine.
View 1 RepliesIn the main file, I would write[code]...
But if I want the component to have that behaviour innately, where do I write it in the mybutton mxml file to have it reference itself?[code]...
I'm building a top view 2D map, that it's objects are stored on the server.The kind of objects are 10 and might be a photo, label, button, lists, mix of them or labels with tooltips.The component must request the "areas" that are missing on screen.An area is 1000x1000 px and is cached in flex.To move in the map, will be like in google maps (drag-and-drop).I should be able to have another list and move objects from one to another using drag-an-drop on objects. Ex.: I grab an objects from a list and I move it on this map, I release the mouse button and the item is placed there.Now the problem is: I build a custom component for this trying to emulate the item renderer for performance and recyclage, implement drag-and-drop on objects and request the areas that are missing?
or
I extend the List component from spark and I add some features as multiple kind of itemrenderers and use recycle on them. Of course it must be able to request the missing areas on the screen and cache it's data.Maybe create a custom layout is needed too.What I need is something that must be really fluid, so the lighter this component is, the better.
UPDATE: *There will be not any object over another.
*I will not use hitTest on bitmaps because all bitmaps are wrapped in another component,as they,for now are itemrenderers.
Anyway I already begin to do this using a class that extends the SkinnableDataContainer and a custom layout. As the layout is not like a grid, is sparse, random items at diferent points(x, y).How to get the localX and localY, relative to item renderer and not to the Spark List, from a DragEvent in Flex 4?
I have a custom Flex 4.5 component (to be used in a List) -
Game.mxml (represents a clickable playing table in a card game):
<?xml version="1.0" encoding="utf-8"?>
<s:ItemRenderer [code].......
But I never see the "game clicked: " trace. Does anybody please know why? I'm probably missing something minor, because I can see the "Clicked: 8946" trace.
This is similar to the question asked here. I am dispatching custom event "ShopEvent" but i am getting error "Type Coercion failed: cannot convert flash.events::Event@81ecb79 to com.events.ShopEvent"Note: Error is thrown from the parent custom component (3rd code snippet), I have added more details thereThis is my custom event. See the first constant, I copy pasted the event name in custom components.
package com.events
{
import flash.events.Event;
[code]......
Given this:public namespace foo;foo var bar:String = "baz";We can access the property "bar" like so:[code]It gives me the following error: ReferenceError: Error #1069: Property foo::bar not found on MyClass and there is no default value.On further inspection of the foo namespace I can see (in the debugger) that the URI is in the format {package}:{type}/{name}. If I try to replicate this by doing the following:[code]Does anyone know if it is possible to get access to namespaced members like this? I don't have compile time access to the namespace, but I can look up it's uri (and prefix) dynamically at run time.
View 1 RepliesThe spark panel component for example can be written like this
<Panel title="Skinny">
<child components ... />
<controlBarGroup>
<child control bar components ... />
</controlBarGroup>
[Code]...
The motivation here is that I can now create a couple different skin files to change the look and layout of those subgroups. Reading source of the spark panel, there are some calls within the mx_internal namespace such as getMXMLContent() which is a method of the spark group component, but which I have no access to.
Does the description above make sense? How can I create custom 'contentGroups' in my custom Flex4 component that can use nested mxml child components? Should I approach this a different way?
I am making use of a custom cursor on itemRenderers in a List component. The custom cursor works just fine except when I mouse over the Text component which is a child of the itemRenderer at which point I get two cursors, the custom and an iBar one on top of the other.Here's the code:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
[code].....
I couldn't work it out yet...
package components {
public class templateSelection extends VBox {
static public var tempSelectionBag:Dictionary;
[Code]....
I want to have a custom class tempSelection with a Dictionary as a public accessable property of that class. If I use this code, the compiler tells me:
1046: Typ wurde nicht gefunden oder war keine Kompilierungszeit- onstante:Dictionary
Which translates to:
Type was not found or was not a compile-time constant: Dictionary
I created a custom MXML component, TurboContent, that extends the NavigatorContent class:
<s:NavigatorContent xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
[Code].....
In this case, the 'myButton' component never shows up, but all the elements of the base component do (3 buttons and a datagrid).
I have two components. One is called "InsideComp" and one is called "OutsideComp". OutsideComp has InsideComp as one piece of its component, and in my main MXML file, I have embedded an instance of OutsideComp. How do I access a public variable of InsideComp within my main MXML file?In Actionscript, I could just do something like:OutsideComp.InsideComp.valToChange = 5; But I dont know how to do it in MXML. I know this is probably an easy question.
View 4 RepliesI would like to bind two components with out binding and which resides in different MXML.for eg: A.mxml has textinput and B.mxml has a combobox when choose one item in B.mxml selected item should be display in A.mxml textinput.
View 2 RepliesI have a component with a public variable declared
[Bindable]
public var mnuSource:String;
When I extend this component, I can reference mnuSource (it compiles) but Runtime complains about the property not being accessible (error 1056).
How do you modify / declare component properties so they are actually available to other components?
I have a remoteobject within my main.mxml.I can call a function on the service from an init() function on my main.mxml, and my java debugger triggers a breakpoint.When I move the remoteobject declaration and function call into a custom component (that is declared within main.mxml), the remote function on java-side no longer gets called, no breakpoints triggered, no errors, silence.[code]
View 2 Repliesis there any way to create a custom css value for a component and have it available to the skin class that component is using? for example, if i define this in a css file:
[Code]....
is there a way to make myCustomValue available in the PanelSkin ?
I'm just getting started with custom events in a custom component. And I don't quite have the hang of it, yet. I've got a component with a button in it. When it's clicked, I want to call a function in the main app.
Custom Component:
<mx:Panel xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute" >
[code].....
I'm making a UI for a component in Flash. I wanted to use Flex and have had no luck getting the onUpdate exernalInterface call to fire properly. I'm referencing the functionality described here: [URL]. First off, I can't embed the SWF in the FLA. It just won't start the Flex SWF. Even using the external swf, it seems that the onUpdate function is either called too early or not at all. Here's what I've tried:
Tying the externalInterfce declaration to the initialize, preinitialize, applicationComplete, and creationComplete events. Sub-classing my application and putting the externalInterface in the constructor. Neither of these options work. When I create a basic AS3 project in Eclipse and put the externalInferface in the constructor, it works as expected.
I need to create custom component like [code]...
Here, I need to create custom component object, changing their element values and appending that custom component in VBox. What are the correct syntax to implement this one?
As far as I know theres in no way to cahnge the alpha of a dynamic text box. I put one in a movie clip and when i try to change the alpha of it everything else in it changes its alpha but the not the DT box. Could someone plz verify for me that u can't change alpha and help me find a component that allows alpha control with a dynamic text box. thx in advance.
View 5 RepliesOur software team has been developing flash applications using AS3 (via the FlashDevelop IDE and the free Flex SDK). Recently, some members of the team started exploring FlexBuilder and Flex (wow... why did we wait so long?). The problem is that some folks continue to develop using pure Action Script 3 (FlashDevelop) while others are creating custom components in FlexBuilder. How do the AS3 developers use the Flex Custom components built in FlexBuilder in their AS3 Applications?
View 7 RepliesI used a FlexBuilder Library Project to create a custom component library (swc). The custom component is a control bar with text fields and buttons, etc.The vast majority of our team's code is done in pure AS3 I've successfully included my new SWC in the lib and build path in our AS3 project.I've also successfully instatiated an instance of my custom component, but for some reason, it will not display. I know it exists, because 1) the compiler had no complaints, and 2) I can trace property values of the custom component and get valid output from the trace statement.
trainer.games.board.MatchThree {
import flash.display.Sprite;
public class Test extends Sprite{
[code].....
I am creating a custom component in Flex with extends the BorderContainer class, and I would like to be able to place additional content within the tagset when I use it in my main application, like this:
<components:CustomComponent title="Hello">
<s:Label text="If you have one enter it below:"/>
<mx:Spacer height="15" />
[Code]....
This works just fine, except that my component definition had some additional things inside of it, such as a <s:Label/> and styling, which is replaced by the content within the tagset above when I go to use it.
If I do not put anything within the tagset, the content that was originally in the component is not replaced.
Is there a way that I can simply append additional content inside of the component when I go to use it, instead of it being replaced each time?
I created separate own canvas component for Home page, Contact page, Rules page etc.In my main application it has link button like Home,Contact,Rules in application controller(child state) . [code]...
View 1 Replies