I got 2 parsley configurations for my 2 elements.
A.xml
<fx:Declarations>
<!--Presenters-->
<presenters:ScenarioDefinitionPresenter id="scenarioDefinitionPresenter"/>
[Code].....
how to make that the "scenarioDefinitionPresenter" in both config share the same instance?
My project is open - I see the expanded sub-folders. There are not compile errors showing up. Under the project's properties I see Run/Debug Settings but the New button is greyed out.
View 1 RepliesIf I have one MovieClip which has two frame, each frame has a 1K Bitmap.When I create three instance of this MovieClip, Is these three instance share the same memory which will only cost 2K memory or they has their own memory which will cost 2K * 3 memory?
View 1 RepliesI want to use the Parsley framework and I want to use GraniteDS for remoting. As of 2.1, GraniteDS generates AS3 service classes from your Java code as local proxies, and I want to use these classes in Parsley.[code]...
View 1 RepliesI am planning to start a new project in as3 and I want Dependency Injection in the project. I found that parsley and Robotlegs are two popular frameworks for implementing DI in AS3. Which is the best one among these two?
My main requirements are
lightweight
minimal learning
extensive documentation and active helping community
I needed some guidance on how to use FlexUnit 4 within Flash Builder,to unit test a Parsley-frameworked Flex application.I have tried lookign at one or two sites but with no avail.
View 1 RepliesI was wondering if Parsley framework is compatible for Flex Hero Mobile 4.5? I seem to get a warning saying it's not compatible.
View 2 RepliesHow do I compile from the Parsley framework repository to a Flex Library, so that i can use it with the latest 4.5 Flex framework?
View 1 RepliesI'm using
<parsley:ContextBuilder config="{Parsley_Config}"/>
in my main application. The problem is popup window cannot detect the configuration.
I'm looking for examples of command chaining in Parsley. What I mean by command chaining is when one command returns a result that is then immediately used to initiate another command. I ask this question here because the parsley forums have been down for 2 days.
View 1 Repliesi'm looking for a possibility to log messages in my flex 4.5 Project. This should cover errormessages in remoteClasses, errorHandler or messages typing by hand. After reading a lot of webpages, the solution from parslay looks good. i want to switch to this framework anyway. the benefit is the possibility to configure the logging behavior at runtime. but i don't understand the documentation. perhaps because I'm brandnew in parsley. Also google has no fitting result.
[Code]...
I am trying to use parsley framework in my flex application. Messaging System is one of the best feature that I see while using parsley, But I had a doubt, Does using Parsley framework in your application means that
[Code]....
I'm starting with Parsley and cannot manage to make the autowire working. My configuration is based on flex 4.5 and parsley 3.0.0. My application contains the folowing bootrap :
[code]....
The workaround is quite heavy as it requires adding in all my views the proprietary tags. what is wrong with my configuration?
I am using Parsley framework. In my application, messaging system of Parsley is working fine for custom events.
But, in some areas, I have event listeners for MouseDown, MouseUp events on some components. How to deal with flash inbuilt events ?
How to share TextArea Component in multiple swfsaylib.swf (has TextArea Componenet)main.swf (Import TextArea Componenet from lib.swf)section.swf (Import TextArea Componenet from lib.swf)
View 1 RepliesI have a parsley popup that can create another popup.The issue comes when I close the root popup, when I open the popup again and click on the child popup, it's actually opening 2 child popups.Any idea why this thing happen?
<parsley:PopUp open="{presenter.scenarioCreatePopup}" modal="true" center="true" reuse="false" id="hem" >
<views:ScenarioView width="100%" height="100%" id="scenarioView"/>
[code].....
I am developing a Flex / Flash application which talks to an ASP.Net / C# backend. Is there any way I can share code between the two?The server provides a reasonably interesting domain model which the client is designed to maniuplate. Ideally I would like to be able to define this domain model once and have both sides use it for consistency. I am after all the benefits that come with being DRY.I'm new to Flex but the sort of thing I had in mind was some intermediate language that compile to both C# and ActionScript.
Update:I currently have a basic REST style web service which sends XML serialized versions of the objects down the wire to Flex. This works fine but what I am really interested in is being able to share simple business logic that goes along with these objects. There are certain business rules that need to be processed on both the server and the client and is possible I would prefer not to have to call back to the server for performance reasons.
I have a Flex application that I'm working on for a new job. It's sort of a training wheels application -- I'm learning the language, and this isn't an app that needs to talk to a service in order to do its job. There are a few instances of combo boxes throughout the application that share the same set of possible values (say, a selection of states: "In Progress", "Rejected", "Complete") that I want to have use the same data source.
What is the best way to manage this?
Lets say I have two swfs A and B, and at runtime, swf A loads swf B, and I wish to share code between them, to minimize file size and download times.
If swf B has some code (say. com.blah.HelloWorld), I tell the compiler to have swf B's source in swf A's classpath, but only do a compile-time link and not actually compile com.blah.HelloWorld into swf A
This works, and I have tried it, using a the -includes and -externs compiler options.
However, My problem is that I wish to do this the other way. i.e. swf A and B (and potentially swf C) all need com.blah.HelloWorld, but I want com.blah.HelloWorld to be compiled into just swf A, have it as an external reference in swf B ( and potentially C as well.)
I tried doing this using the externs and includes, but I get ReferenceErrors when I do this.
I want to do this without a having a separate rsl, so I can reduce the number of http requests.
Are IDs attributes shared between different modules in Flex ?
i.e. I have a text area with id="text1" in my menu.mxml file.
And I want to write on it from another module mainArea.mxml
The debug gives me error, so how can I share different components ?
I've got a Flex 3 website. How do I add a Twitter share button?
View 3 Repliesi am developing an application in which user have the option to share images on different social sites like Facebook, twitter and Flicker.
I have done with Face book and twitter, i upload image to my server and share the link on Face book and Twitter.
[Code]...
I have a flex app that loads a WSDL at runtime and shares that across several different web services I have defined. Unfortunately each call to loadWSDL() makes a network request for it, and while it's not really a problem due to caching it's still annoying and wasteful to have all those requests generated. Is there a simpler way to solve this problem and only make one network request?[code]
View 1 RepliesI'm involved in writing a Flex/ActionScript library and in the future I will be involved in writing the same library in JavaScript. Rather than writing a library in each language and having to maintain them separately I was wondering if it was possible to:
1) Write the code in one language and share the code into the other e.g. Write the code in JavaScript and use the same .js files in ActionScript
2) Write the code in one language and perform a conversion into the other
I know it's possible to communicate between Flash/ActionScript and JavaScript but I'd like to avoid the overheads in using the technology bridge so this isn't really an option.
How do other people deal with writing and maintaining libraries that do exactly the same thing but in different languages? Specifically how do people do this between JavaScript and ActionScript?
I'm trying to duplicate the behaviour of the "Share on Facebook" button from Youtube. Basically, inside a Flex app I'll have a button and when I click it I want a popup that enables me to post something on the wall. While it is possible to make a call to javascript to open the pop-up I want to be able to set the images and the text of my posting. How I could set the images or text as a parameter to the sharer window?
View 3 RepliesI Created a white Board in Big Blue Button.In that white board i created a text Field.. Now i want to Share the Text Field.
View 1 RepliesI have two applications in my project 'test' the applications are one.mxml and two.mxml and i want to use the same main.as file in both using
<script source='main.as'/>
Can I access the components of both applications from main.as when both are running simultaniously.
I'm currently working on a chat with uploading an image and sharing it. The problem is I can upload and display the image but I can't share it to the other side. Here is some code:
[Code]...
I recently completed a project for a custom report UI in Flex. Now, I've been tasked with creating a new application that is essentially a "lite" version of the original UI. It will include only a few of the options that are in the original application. Also, it needs to be a separate application.
I do not want to duplicate my code, so I am planning on moving a bunch of the classes from the original application to a new library that can be shared by both applications. However, I'm trying to figure out how to make this work in my MVC environment.
For example, I have an Accordion component that lets users filter several items. Each Accordion child is an instance of a custom component with two lists (one for entities available for selection, the other for the entities the user has selected). Each child component has properties bound to the Model and functions that call Cairngorm Events.[code]...
I have to put multiple Flash movies on a page and I'd like them to share modal popups, so that access to the entire page is denied while a popup is active. I can do this via Javascript and create HTML popups via the ExternalInterface class, but I would love to be able to do this entirely in Flex using the PopupManager class.
Note: This is not for any evil purpose. I just need to make sure none of the other movies' buttons are clicked before the user responds to the first thing they clicked. Also, some of the movies are quite small and can't contain some of the popups they require.