I have a button named "CloseWindow" inside of a movie clip in as3. I want to go to a frame labeled "up" within that movie clip when clicked. I am using the following AS code:
[Code]...
When I run the swf and click the button, I get the following error and the button doesn't work at all:
ReferenceError: Error #1069: Property gotoAndPlay not found on flash.display.SimpleButton and there is no default value.
I want to make a button that makes you got to a random frame within a certain range (eg frame 41-50) when you press it. I have tried various codes but so far no luck. Im using AS 2
and the button is within a couple of movie clips, but you can still click it when you test
I hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
I have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
i have one button (enter_btn) inside of one moviclip(enter_mc), and I need to know how to call the button through my frame root?
I use one movieclip only to make a fade in of my button in only one frame of my frame root.
[Code]...
there is a button on 1st frame. there is a movie clip on frame 2. I named the movie clip as "ball_mc" I want to go to frame 2 when I click on button on 1st frame. I know that the code "gotoAndPlay(2);" on button will work. But for some reasons, i want to try another way.... i tried several codes:
1. this.ball_mc.gotoAndPlay();
2. _level.ball_mc.gotoAndPlay();
3. _global.ball_mc.gotoAndPlay();
4. _root.ball_mc.gotoandPlay();
However these codes dun work. Is there other way to resolve this besides this code "gotoAndPlay(2)"?
I have 5 different buttons for the navigation on my flash website.The first page is on frame one.When you click on any of the 5 buttons I want it to play frames 10 - 15 before moving to which ever frame the button 1-5 corresponds to. So:
Click on button 1 > plays frames 10 - 15 > Goes to frame 20
Click on button 2 > plays frames 10 - 15 > Goes to frame 30
Click on button 3 > plays frames 10 - 15 > Goes to frame 40 etc
How do I make this work?
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
I've been following the book "Beggining Flash Programing for Dummies" and I have come up to a part where I create a very simple game.
The script involved in the frames are FRAME here:
stop();
btnGoThere.onRelease = function(){ _root.gotoAndStop("there");
} //end event handler
Frame there
btnGoHere.onRelease = function(){ _root.gotoAndStop("here");} // end release
When I test the movie and click the button, the frames don't seem to change.
I have a small flash site made up of a number of pages all on the one timeline.
The query is this. When i release a button i want the timeline to roll on for x frames (fading components out) before going to the frame that button links to (The beginning of the new page).
I have no idea what AS to use for this.
No matter where in the timeline you are, the button should fade out that area and then skip to a new one.
I have a problem where I have declared an onRollOver event handler on frame 5. I also have a button on frame 4 telling flash to go to frame 5.But, if the mouse is already over the movieclip on frame 5, the rollover event will not play.Is there a way to force this onRollOver or another workaround for this?
View 1 RepliesI am making a website with a flash menu. I want it to gotoAndPlay a particular frame (frame A) when the cursor is on a button. When you roll the cursor off of the button I want it to gotoAndPlay a different frame (frame B). That part was easy enough. But here is the problem. If you click on the button I want it to continue playing frame A even when you roll off.
View 3 RepliesI have created a racing game and over all i got 3 frames and about 10 main layers Anyway, i have tried so many scripts now and they're not working The game begins on frame 2 while the main menu is on frame 1. Not sure if it matters but i have the menu copied on all the frame 1's of all the layers...
View 2 RepliesI have created a racing game and over all i got 3 frames and about 10 main layers.. i have tried so many scripts now and they're not working .The game begins on frame 2 while the main menu is on frame 1.Not sure if it matters but i have the menu copied on all the frame 1's of all the layers...
View 4 RepliesWhat I'm trying to do is play 5 frames all attached with short audio wav files one right after another. I want to be able to press play for each frame.When I insert either of these codes:
Code:
play_btn.addEventListener(MouseEvent.CLICK, playSound);
}
function playSound(event:MouseEvent):void
[code]....
The video goes straight to playing the frame 1 wav sound file I have there, then when I press the button it rushes through the rest of the sound files in the rest of the frames and starts back at frame 1.Am I missing a code that I need to insert into the other frames, or am I using the wrong coding?
Anyway what I need to do is have a movie clip finish playing when a button is clicked and then go to the frame label associated with the button. I hope I'm explaining myself ok. So if I had say 4 buttons Home Gallery About Contact If Contact is clicked then I want the Home page to play (Which is a fade out) and then go to Contact Page (which will fade in). Then If Gallery is clicked then I want Contact to fade out and then go to Gallery page and fade in.
View 6 RepliesHow do I link a button thats embedded in frame 2 (music page timeline) to a frame in the main timeline ( frame 3= biography page)? Both pages are on the same scene with link buttons embedded in each page independent timeline.
View 1 RepliesI have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
[Code]...
If I have an input text field on frame 1 and I enter text in it then I have a button that say sends me to frame 2. On frame 2 I have a button which sends me back to frame 1. Why when I got back to frame 1 is my text not shown?Why does an input text field go blank when leaving the frame? How can I make it so when i enter text on frame 1 and then go to frame 2 and then back to frame 1 the text i entered is still there?
View 7 Repliesis there any way I can link a button inside a MC on frame1 to a frame inside another MC that is located on another frame.Ive got 2 frames in total. On the first frame Ive got an Mc and inside this one Ive got a button that needs to be linked to frame number 50 which is inside a MC located on frame number 2.
View 1 RepliesI cannot get my button to go to the next frame. It goes in between a mouse-curer(arrow) and a link(hand-pointer)
When you put your mouse anywhere close to the right side the green box fades in, and then stays there so you are able to click on it to go to the next frame.
now the hit state is bigger the actually box-[i don't know if that matters], it works fine anywhere but the actually green box.
So im such a noob to as3, i cant even figure out how to get it to the next frame i have a button, called "bob" lol and i want it to go to the next frame when clicked what is that code? i have spent like 30 mins on it and i cant figure it out and im gonna go crazy!
View 14 Repliesits a gambling game of chance and I want it to go to a random frame which will play a movie when the button "one" or the button "two" is pressed. so on each button, I have the code:
[Code]....
I'm making a small site in flash which contains some basic scripting, and I ran into a problem. I'm trying to make 2 buttons (<<< and >>>) to browse through a certain part of this site, and clicking the button would bring you to the previous/next frame in the timeline.My script in these frames is as follows:
stop();
achteruit.onRelease = function() {
_root.gotoAndPlay(prevFrame);
[code].....
I am currently building a website in flash for a school project and it has to be on a timeline. I was wondering if you could help me i have buttons at the top of the page how would i link these to another frame so it can be used as a new page
View 6 RepliesI cant seem to get my button on frame 76 of scene 1 to jump to scene 4 frame 1 when clicked on.[code]I am getting this error message 1084: Syntax error: expecting rightparen before 4.
View 7 RepliesI'm trying to get a button to go to the next frame. I've searched several books and this is the best I can come up with. I keep getting errors. [code]...
View 3 RepliesI'm using a MovieClip as a button so it can do a little animation when the mouse roll over it. I need this MC to do the action of going to the next frame. My actionscript in the first frame of my MC is the following:
ActionScript Code:
stop();
this.onEnterFrame = function() {
if (rewind == true) {
[Code]....
I understand that as my button is a MovieClip, instead of going to the next frame in the Scene1, it just goes to next frame in the MovieClip...