Actionscript Code:
// button pressesupKey = 38;downKey = 40;leftKey = 37;rightKey = 39;focusKey = 65;attack1Key = 83;attack2Key = 68;bombKey = 81;autoAttack1Key = 87;autoAttack2Key
[Code].....
Rather than affecting one variable, one key press makes all the others true as well
I am making a game using AS2, in which the user controls the character with WASD. I am making a tutorial level in which the level only advances past the first frame after the user has pressed W, A, S, and D. The level is a single frame in which there is a movieclip that has all the enemies. I made an offscreen button in the movieclip which has the code
Code:
on(keyPress "w"){
var w:Boolean = true;
}
[Code].....
When I run it, nothing happens and it stays on the first frame of the movieclip. No errors are shown in the output panel.
how to get a button in one flash file to affect what happens to another fla? Cause Im trying to get an swf that has been opened by another swf through the loadMovie function (which I�ll call swf a) to open another swf inside swf a.
View 3 RepliesI have a movie clip, in this movie clip there is a mask. I have three layers in this movie clip, 1. the mask, 2. the item being masked, 3. back ground object. When I click on the movie clip on the stage it gives me a width of 150. 150 is the width of the Mask, layer 1, and the back ground, layer 3. trace(movieclip.width); gives 175. 175 is the width of the item being masked on layer 2 of the movie clip. Is this a quark? or is there someway to get the width of the movie clip like when I click on it in on the stage?
View 2 RepliesI have x amount of MCs arranged vertically with the distance between each being the same. When I roll over any of them the X & Y scale increases for that particular MC with a tween and on roll out they decrease to the MC's original size. Here comes the sticky bit...how can I maintain the distance between each when the scale of an individual MC is increased/decreased? I have attached a basic swf to show you what I mean. (Only the middle MC is active).
View 6 RepliesI have this code that makes a menu with two buttons appear following the mouse when the mouse rolls over a movieClip:
Code:
var imgOptions:menuMC = new menuMC();
//Makes the image options follow the mouse
function showImgOptions (e:Event):void
{
[code]..
The problem is that the buttons are children of imgOptions, and when the mouse is over these two buttons, the movie reacts like the mouse is not over the imgOptions movieclip.
Let's say I have ten widgets that have ten items that need to be turned off. What am I doing wrong here?
Code:
for(i=1;i<=10;i++){
var tempWidget = ["widget0" + i];
trace(tempWidget);
tempWidget.item._visible=false;
}
The trace returns the correct value yet the loop doesn't turn the ten items off. Why?
I have a few language buttons on frame 1 (englishbtn, spanishbtn) in a long timeline with a bunch of keyframes, buttons and movieclips. What I don't know how to do is set up the buttons so that, when pressed, tells a movieclip on a keyframe later in the timeline, to be on a specific frame label (english, spanish).
In other words, when the game gets to the later keyframe with text movieclip, I want the movieclip on that frame to be at a specific frame in the clip (english, spanish), because the button was pressed on frame 1. Some of the text is deep in movieclips on various frames. So those movieclips need to be on the spanish frame, if spanish button on frame1 was pressed.
I am using Flash CS3 targeting flashplayer 9. I have created a menu that has 5 simple buttons in it. I use
a actionscript tween to move the menu from off the stage into view and back again. For some reason when the menu comes on the stage the hittable area of the buttons seems to be getting affected. I am dropping the menu onto the stage so I am only tweening the y property like so
var menuTween:Tween;
menuTween = new Tween(toc_mc, "y", toc_mc.y, 78, 1, true);
When the menu comes into view it is like the hittable area of the button gets squashed vertically down.Even though the text still appears perfectly fine and the background of the button looks right the cursor will only click on a small sliver at the very bottom of each button. Has anyone else seen this?
I have a form and everything is components: labels, comboBox button. I have applied a text format to all the elements.I want the user to select a font from the combo box drop down and then all fonts change. However, I can only get this to work when I don't apply any textFormats to my components initially. I know in as2 you had to setNewTextFormat, is it somewhat similar with this setStyle?
Here is my code:
package
{
import flash.display.*;
import flash.events.*;
[Code]....
I have a symbol that I have already used and I would like to use the same symbol in another frame(s), except that when i edit the symbol the original object also edits, for example if i delete a part of it, it also deletes in the object that I have already placed, I have tried the 'duplicate symbol' method but nonetheless my symbol still gets modified and changes the way I want it to show it in certain frames.
View 2 RepliesI have a movie clip object with a width of 306 and height of 194. I need to change the dimensions of the movie clip and still have the x and y scale set at 100. Currently when I change the movie clip width to 352.8, the x scale increases to 115.3%. I have to have the scale reset to 100% after I've adjusted the movie clip's width. Is there a way to do this in CS3? (this is all in design mode, not run time). Do I need to delete the movie clip and recreate it?
View 2 RepliesI'm having an issue on a dynamic textfield in some browsers; it seems that some browsers are increasing the font size on some textfields, but not all;[code]my flash textfield is embedded ... not all textfields are being affected in the same way.
View 1 RepliesI have a quiz that randomly sorts then dynamically places a question and its answer choices. An answer is a text field laid over a movie clip with a resizable, invisible rectangle and a radio-type button (not actually the radio button component) that handles the rollover and feedback. When clicked, it looks like a selected radio button if correct and has a big red X if incorrect. At this point, I remove all its eventListeners and leave it in the feedback state because the user gets to try again. It also places a feedback box on the screen with the standard, "Try again."
This all works perfectly with the mouse, but the quiz is for .gov sites, so it has to be 508 compliant. When tabbing to and clicking on an answer, the feedback button works fine, and the feedback dialogue does, too. When tabbing to another answer, however, the incorrect try resets to its up state, minus the eventListeners. I am disabling buttonMode when the eventListeners are removed, and I've tried doing all this before the feedback box is placed, as it's placed, and after the user clicks to continue. It doesn't make a difference, and neither does including tabEnabled = false; I tried not even adding the FOCUS_IN and FOCUS_OUT, and that didn't make a difference.
I could removeChild and then add it back as a new, never-been-a-button object, but if there is a simple setting, I'd like to know about it.
[URL] if i have 50 buttons and i click or rollover one of them, i want the rest of the 49 to fade in color, and the one i am rolling over of clicking to say as it is. I imagine for sure there will be use of arrays, but i am not sure if there is a certain class in AS3 or design pattern that i should know about to get this to work in the most OOP way possible.
View 8 RepliesNot having a movie clip on the stage until needed (attachMovie when it's time, and then kill it as soon as it's temporarily of no use).visible = false^ Is there a difference in processor demand? When setting visible to false, it seems to me that a few extra variables would need to be stored for the movie clip..._x, _y, _width, _height, _alpha, etc., etc., etc...but I wasn't sure how Flash goes about handling these things or which was better practice?
View 9 RepliesI'm following a simple tutorial on making a platformer, but I ran into a problem. This is the code I'm using in a player movie clip:
onClipEvent(enterFrame) {
if(this.character.hitTest(_root.bg.ground)==false) {
this._y+=_root.gravity;
[Code]....
When I press the keys, nothing happens, but if I replace the if statement with a 1 then the code executes fine.
I have recently been working on creating a game similar to the good ol' Asteroids game. So far, I have managed to create a very simple piece of code that rotates and moves my spacecraft according to the angle it is currently at. There are two problems with it, though:
1. I can't use two buttons at once--for example, to rotate and move forward. I'm sure there must be a better way to detect key presses. What's the best way to do it in AS3?
2. The way the whole thing works looks kind of jerky and stage. Another thing is, the spacecraft is constantly at an odd angle for no apparent reason.
Here it is ("sc" is my spacecraft movieclip):
var SC_speed:Number;
var SC_rotation:Number;
var SC_radians:Number;
SC_speed = SC_rotation = 0;
function keys(event:KeyboardEvent):void{
[Code] .....
im tryin to make this control the player(head) on stage by simply turning rght now but i can't get it to work...
also all the code for keypresses can be found in the player movieclip on the actions of frame 1
I have a really strange problem. I've made a custom class that listens for keyboard events such as key presses (I use it in order to navigate in an interface). When I test my file in Flash (using 'command'+'enter') all key presses work as they should. However, when I publish the file and starts the projector (or the swf for that matter) one key ('g') isn't doing what it should!
View 2 RepliesI set up some code to record key presses and specific chords. My problem is that I only want the keys to fire once when pressed. This is especially a problem when I require the user to hold CTRL + LEFT for an action.
The user experience is that I want users to hold down CTRL to enter a mode and then press the LEFT key as many times as needed. Currently, the CTRL trace and LEFT trace fire continuously. Is there a way to do a onKeyRelease?
Code:
var keyListener:Object = new Object();
keyListener.onKeyDown = function() {
if (Key.isDown(Key.CONTROL)) {
[Code]....
When I say two keyboard presses, I'm thinking about a situation where I would need to detect both. Not a shift this or alt that or control third. I'm talking about Down + A or 5 + T. For instance: Ryu has an overhead attack that is used when both Down + MP are pressed. If I were to create a game, with ActionScript 3.0, is there a way for me to detect that both buttons were pressed at the same time?
View 5 RepliesI am creating a dancing game:
[URL]
I need to disable the keyboard after each key is pressed, so if the user presses the UP key until the character has finihsed doing the move no other key can be pressed.
i'm not very good with actionscript but i manage to do something close to what i want. It's explained in the swf itself... swf: [URL]
View 12 RepliesI am using the drawRect() method. The only way I know how to colour something is by using beginFill and endFill(). But if it's already drawn then how can I change it? It
View 2 RepliesI have a zooming map .swf file loading in behind a navigation button interface .swf. The map.swf turns your mouse to a hand cursor so you can pan when you zoom in on it.Eveb though the map file is behind my nav file,when I roll over my nav file, the mouse is still turning to a hand cursor. Is there any way around this? The only time it turns to an actually pointer is when it rolls over the actual buttons on the nav file, so the mouse flickers back and forth between the hand and the pointer.How can I get the lower .swf to not effect the .swf on top?
View 8 RepliesWhat's the best way of resizing parent movieclip without affecting the children? I have a container movieclip that resizes depending on the stage, and when I add another movieclips to it they also resize, but I want them to keep the original size,
View 3 RepliesThe idea is to click on a mc that takes you back one frame (into a different room) and it changes the visibilty of another mc in the new room to false. Here is the code so far:
poodle_mc.onPress=function(){ _root.rooms_mc.safeClosed_mc._visible=false; _root.rooms_mc.gotoAndStop("Office");}
I return to the "Office" frame just fine but the safeClosed_mc is still visible
I'm using the loadMovie command to load an external swf (a brief tutorial) into the parent swf. The parent swf is an interactive exercise with several answer buttons. The user can click a button to open and close the turorial on top of the exercise.k the answer buttons in the parent swf below and hear the correct and incorrect sound cues. When they close the tutorial, they see that answers have been given and there's a score when they didn't intentionally give any answers.
View 3 RepliesI'm having an issue with setting the volume on my sounds.
I have a number of movieclips, that when clicked on, play a sound. I have created an Event Handler for the movieclip, that when it is clicked on, the sound plays, but the setVolume is higher.
I also have background music, set a bit lower than the rest. Here's the issue, when I click on the movieclip that makes it's specific sounds go higher, the background music goes higher also.
How do I set the volume of my movieclip without it changing the volume of the other sound/s?
Here's the code:
Quote:
gameMusic.setVolume(50);
gameMusic.start(0, 500);
[Code]....
I want gameMusic to stay at 50, but it goes to 300 when I click on shark. Why would that change it?